CATHODIC PROTECTION IN ONSHORE PIPE NETWORKS GAS PAGARDEWA RECEIVING STATION

I Gusti Ayu Arwati, Euis N, Dedi Sirait

Abstract


The use of pipelines is one element that plays an important role as a production chain The pipeline network is used as the main component to distribute gas from the producer to the shipper and then distributed to industrial and household customers. In accordance with the regulations of the Ministry of Mines and Energy No. 300. K / 38 / M.PE / 1997 concerning the Occupational Safety of Petroleum and Gas Pipeline Pipes that the gas and main pipe transmission pipes held on land must be planted with a depth of at least 1 (one) meter above ground level.  However, the placement of steel pipes in the ground can cause pipe material to be threatened by corrosion due to interaction with the environment. This happens in the Pipeline Line of the Gas Pagardewa receiving station. To prevent corrosion from continuing on the pipeline, a precautionary step is needed where one of them is by applying the cathodic protection method. At Pagardewa Gas Receiver Station, which has the role of distributing gas to PLN's power plan in South Sumatra by using a 4875 m pipeline that is embedded in the ground so it needs to be designed for a cathodic protection system to be corrosion resistant. The purpose of this study is to design a cathodic protection system that uses sacrificial anodes so that the analysis can be obtained to be applied in the field.


Full Text:

PDF

References


Bahadori, A. 2017. Chapter 4 - Transportation Pipelines Pressure Testing . Oil and Gas Pipelines and Piping Systems , 93–117. https://doi.org/http://dx.doi.org/10.1016/B978-0-12-803777-5.00004-6

Brock, J., & Zaroog, O. S. 2017. Copper Alloys: Corrosion. Reference Module in Materials Science and Materials Engineering, (February 2016), 1–4. https://doi.org/10.1016/B978-0-12-803581-8.02892-7

Bu, Y., & Ao, J.-P. 2017. A review on photoelectrochemical cathodic protection semiconductor thin films for metals. Green Energy & Environment. https://doi.org/10.1016/j.gee.2017.02.003

Bu, Y., Chen, Z., Ao, J., Hou, J., & Sun, M. 2018. Study of the photoelectrochemical cathodic protection mechanism for steel based on the SrTiO3-TiO2composite. Journal of Alloys and Compounds, 731, 1214–1224. https://doi.org/10.1016/j.jallcom.2017.10.165

Buchheit, R. G. 2018. Corrosion Resistant Coatings and Paints. Handbook of Environmental Degradation of Materials (Third Edit). Elsevier Inc. https://doi.org/10.1016/B978-0-323-52472-8.00022-8

Casal, J. 2018. . Transportation of Hazardous Materials. Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants. https://doi.org/10.1016/B978-0-444-63883-0.00012-5

Dai, M., Liu, J., Huang, F., Zhang, Y., & Cheng, Y. F. 2018. Effect of cathodic protection potential fluctuations on pitting corrosion of X100 pipeline steel in acidic soil environment. Corrosion Science. https://doi.org/10.1016/j.corsci.2018.08.040

Genchev, G., & Erbe, A. 2017. Sour Gas Corrosion—Corrosion of Steels and Other Metallic Materials in Aqueous Environments Containing H 2 S. Reference Module in Chemistry, Molecular Sciences and Chemical Engineering. Elsevier. https://doi.org/10.1016/B978-0-12-409547-2.11546-X

Lazzari, L. 2017. Cathodic Protection: Basic Principles. Reference Module in Chemistry, Molecular Sciences and Chemical Engineering. Elsevier. https://doi.org/10.1016/B978-0-12-409547-2.13445-6

Mahmoodian, M. 2018. Introduction. Reliability and Maintainability of In-Service Pipelines. https://doi.org/10.1016/B978-0-12-813578-5.00001-9

Makhlouf, A. S. H., Herrera, V., & Muñoz, E. 2018. Corrosion and protection of the metallic structures in the petroleum industry due to corrosion and the techniques for protection. Handbook of Materials Failure Analysis. Elsevier Ltd. https://doi.org/10.1016/B978-0-08-101928-3.00006-9

Shekari, E., Khan, F., & Ahmed, S. 2017. Economic risk analysis of pitting corrosion in process facilities. International Journal of Pressure Vessels and Piping, 157, 51–62. https://doi.org/10.1016/j.ijpvp.2017.08.005

Simpson, D. A.. 2017. Surface Engineering Concepts. Practical Onshore Gas Field Engineering. https://doi.org/10.1016/b978-0-12-813022-3.00004-3

Singh, R. 2014. Hazards and Threats to a Pipeline System. Pipeline Integrity Handbook. https://doi.org/10.1016/B978-0-12-387825-0.00005-3

Singh, R. 2017. Corrosion and Corrosion Protection. Pipeline Integrity Handbook, 241–270. https://doi.org/10.1016/B978-0-12-813045-2.00017-X

Sudarsan, V. 2017. Materials for Hostile Chemical Environments. Materials Under Extreme Conditions. Elsevier Inc. https://doi.org/10.1016/B978-0-12-801300-7.00004-8

Sutton, I. 2017. Inspection. Plant Design and Operations, 335–352. https://doi.org/10.1016/B978-0-12-812883-1.00011-5

Sutton, I. (2017b). Transportation. Plant Design and Operations. https://doi.org/10.1016/B978-0-12-812883-1.00007-3

Sagir Alva1, Aiman Sajidah, , Mohd Ismahadi bin Syono3, and Wan Adil bin Wan Jamil.2018. Ag/Ag Cl Reference Electrode Based on Thin Film of Arabic Gum Membrane. Indones. J. Chem. 18 (3), 479 - 485

Arwati, I. A., Majlan, E. H., Daud, R. W., & Alva, S. (2016). Pengaruh Arabic Gum Terhadap Laju Korosi Pada Aluminium 5052 Menggunakan Teknik Elektroforesis. Malaysia: Universitas Kebangsaan Malaysia




DOI: http://dx.doi.org/10.36055/wcej.v3i1.5613

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 World Chemical Engineering Journal

WCEJ (e-ISSN: 2443-2261) is published by Chemical Engineering Department, University of Sultan Ageng Tirtayasa (UNTIRTA).

This Journal has been indexed by:

Google Scholar

Open Academic Journal Index

JIFACTOR (Journal Impact Factor)

Cite Factor 

General Impact Factor (on Progress)

 

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.