The Utilization of Internet of Things (IoT) for Multi Sensor Data Acquisition using Thingspeak

Mohamad Jamil, Muhamad Said

Abstract


Internet Of Things (IoT) is one form of innovation that aims to expand the benefits of continuously connected internet connectivity, one example of the use of this technology is in terms of remote monitoring (eg remote monitoring); monitoring weather conditions, water levels, air pollution, forest fires and so on. In this research will apply the utilization of Internet Of Things (IoT) for acquisition of multisensor measurement data using the Thingspeak interface. Based on the results of tests conducted it was found that various series of sensors, such as; temperature sensors, water level sensors, vibration sensors and smoke sensors can display data in the form of results graphs through the Thingspeak software

Keywords


Internet Of Things, Multisensor, Suhu, Water Level, Vibration, GAS, Thingspeak



DOI: http://dx.doi.org/10.30870/volt.v3i1.1962

Refbacks

  • There are currently no refbacks.



VOLT: Jurnal Ilmiah Pendidikan Teknik Elektro is licensed under a Creative Commons Attribution 4.0 International License

________________________________________________________
VOLT: Jurnal Ilmiah Pendidikan Teknik Elektro (ISSN: 2528-5688 | e-ISSN: 2528-5696)
Organized by Research Center for Technical and Vocational Education and Training (RCTVET) - Department of Electrical Engineering Vocational Education - Universitas Sultan Ageng Tirtayasa
Published by Department of Electrical Engineering Vocational Education - Universitas Sultan Ageng Tirtayasa in collaboration with Asosiasi Dosen dan Guru Vokasi Indonesia (ADGVI) - Association of Indonesian Vocational Educators (AIVE)
Address : Jl. Ciwaru Raya No. 25, Sempu, Kota Serang, Banten 42117, Indonesia
E   : volt.jipte@untirta.ac.id, abi.mustofa@untirta.ac.id, m.abihamid@gmail.com
Ph : +62 8566666090 / +62 81298509170

simple hit counter simple hit counter Free counters!