Pengaruh Temperatur Substrat Dan Waktu Deposisi Menggunakan Metode Spray Pyrolysis Terhadap Morfologi, Struktur Kristal Dan Sifat Listrik Lapisan Tipis Zno

Febri Arnanda

Sari


Transparent Conducting Oxide (TCO) is a Transparent conductor that functions as a low-e windows and transparent front electrode. TCO material has the characteristics of low electrical resistivity and high transparency, the TCO made in this study is a Zinc Oxide (ZnO) material. Process variables used in this study include substrate temperature and deposition time. Making ZnO thin films using the spray pyrolysis (Ultrasonic Nebulizer) method. Characterization used in ZnO thin layer samples includes Scanning Electron Microscopy-Energy Dispersion (SEM-EDS), X-ray Diffraction (XRD) and I-V Meter (picoammeter). The results showed that the morphology of the ZnO thin layer had been formed fairly evenly on the surface of the glass substrate at a temperature of 500C deposition time of 20 minutes and 1000C at the deposition time of 30 minutes. The higher the temperature of the ZnO thin layer does not form on the surface of the glass substrate. The longer the deposition time of 30 minutes the peak intensity is getting better. ZnO thin layer shows hexagonal structure, intensity of dominant peak at orientation (011), ZnO thin layer resistivity temperature 500C 5.6 x 10-10 Ω.cm and temperature 1000C 2.69 x 10-10 Ω.cm.

Teks Lengkap:

PDF (English)

Referensi


Arfida Berlina Suryono, Agus purwanto dan dina ratnasari, " Pembuatan nanopartikel Seng Oksida (ZNO) Menggunakan Proses Flame Assisted Spray Pyrolysis (FASP) " Vol 13 No 1 Januari 2014.

Cahyana and A. Marzuki, “Analisa Sem (Scanning Electron Microscope) Pada Kaca Tzn Yang Dikristalkan Sebagian,” No. Isbn 978–602–0960–00–5, 2003.

Chen, C.H., Kelder, E.M., Van Der Put, P.J.J.M., Schoonman, J.: “Morphology control of thin LiCoO films fabricated using the electrostatic spray deposition (ESD) technique”. J. Mater. Chem. 6, 765–771 (1996)

D. S. D. Amma, V. K. Vaidyan, and P. K Manoj, “ Structural Electrical and Optical Studies on Chemically Deposited Tin Oxide Films from Inorganic Precursors“, Mater, Chem, Phys 93, no 1, pp 194-201, 2005.

Eko Juarlin, Paulus Lobo Gareso and Sri Syamsuluri, “ Pengaruh Konsentrasi Seng Asetat Dehidrat (Zn(CH3COO)2.2H2O) terhadap Sifat Optik dan Struktur Kristal ZnO “ Jurusan Fisika, fakultas Matematika dan Ilmu pengetahuan Alam. Universitas Hasanuddin.

Franz Schrank, J siegert, J Kraft, Dkk, “Modelling Spray Pyrolysis Deposition” Proceeding of the World Congress on Engineering 2013 Vol II, London, U.K.

Hamedani, H. A., Dahmen, K.-H., Li, D., Peydaye-Saheli, H., Garmestani, H. and Khaleel, M. (2008) Fabrication of gradient porous LSM cathode by optimizing deposition parameters in ultrasonic spray pyrolysis, Materials Science and Engineering: B, 153, 1-3, pp. 1-9.

H. Ruiz, H. Vesteghem, A.R. Di Giampaolo and J. Lira, "Zirconia coatings by spray pyrolysis", Surface and Coatings Technology, 89(1-2), p. 77-81, 1997.

https://materion.com/-/media/files/advanced-materials-group/me/technicalpapers/transparentconductiveoxidethinfilms.pdf Transparent Conductive Oxide [Diakses pada 10 Januari 2019]

Katsuya Tabuchi, wilson W, Wenas, Akira Yamada, optimization of ZnO film for Amorphous Silicon Solar Cells, jpn, j. Appl. Phys, Vol 33332,1993, Part 1, No. 9A, 3764-3769.

Ludwig j Gaucker and Dainius Perednis, “Thin Film Deposition Using Spray Pyrolysis” Journal of Elecroceramics, 14, 103-111, 2005

Loffler, J. 2005. “Solar Cells”. Tesis. University Utrecht: Belanda.

M. Hikam, bambang soegijono, erfan handoko Dkk, " Pengaruh Suhu Tumbuh terhadap Sturktur Kristal Lapisan Tipis Zno 0,02 mol " Jurnal Fisika dan Aplikasinya, vol 14 No.1 mei 2013.

Nunes p, Fernandes b, Fortunato e, Vilarinho p, Martins r. Performances presented by zinc oxide thin films deposited by spray pyrolysis. Thin Solid Films. 337: 176-179, 1999.

Perednis Danius, “Aplication in Solid Oxide Fuel Cells” Zurich : Dipl. Phys. ETH, 2003

Sulaiman,syuhada, and dwi bayuwati, "Pembuatan Konduktor Transparan Thin Film SnO2 dengan menggunakan Teknik Spray Pyrolysis" jurnal Fisika Himpunan Indonesia Volume 8 No 1 juni 2008.

Triaminingsih,siti (1998). “Analisa Difraksi Sinar-X pada baja tahan karat austenitik dan feritik”.depok: Universitas indonesia

Wijaya danu (2018), “Pengaruh konsentrasi precursor dan Temperatur Anniling terhadap Struktur Kristal, Morfologi Permukaan Lapisan dan Sifat Optik Lapisan Tipis seng Oksida Melalui Metode Spray Pyrolysis”. Cilegon:Banten, Universitas Sultan Ageng Tirtayasa

Wildan S Nahar. (2015) “Temperatur Controling on diode characterizaton” Bandung: Institut Teknologi Bandung.

Z. . Wang, H. Kawauchi, T. Kashima, and H. Arakawa, “ ignificant influence of TiO2 photoelectrode morphology on the energy conversion 27 efficiency of N719 dye-sensitized solar cell,” Coord. Chem




DOI: http://dx.doi.org/10.36055/jf.v4i1.7524

Refbacks

  • Saat ini tidak ada refbacks.


##submission.copyrightStatement##

##submission.license.cc.by-sa4.footer##