Perancangan Antena Mikrostrip Multiband Bentuk Segi Empat 2 Patch Menggunakan Gabungan Metode Array Dan Slot

Junas Haidi, Alex Surapati, Tri Riski Pahlovi

Abstract


Antenna is the most important thing in wireless technology. The technology of communication in this era does not only work on only one frequency, but it has many work frequency. In this research, the method that is used to create the antenna works in Multiband by using an array and slot method. Based on the result of this research, quadrilateral microstrip antenna by using 2 patches has a resonant frequency of 1,3 GHz, 1,8 GHz, 2,4 GHz, and 2,8 GHz. From the measurement results that is done, all antennas that resonate at that frequency has met the antenna standard which is the value of return loss less than -10 dB and VSWR less than 2, so that the antenna that has been made can work well in accordance with the function of the antenna. The slot method used in the design of microstrip antenna operates to add up the resonant frequency of the antenna and improve the value of return loss. Meanwhile, the array method that is used can add up the resonant frequency in microstrip antenna. By combining both methods in the design of quadrilateral microstrip antenna, it will generate a multiband antenna resonance frequency.


Keywords


Microstrip Antenna, Multiband, Array, Slot.

Full Text:

PDF

References


S. Prabhakar, Rao Mallikarjuna, “Design of Rectangular Patch Antenna Array with Multiple Slots by Using Mitered Bend Feed Network for Multi-Band Applications,” Int. Conf. Electromagn. Interf. Compat., vol. 6697, no. 5, pp. 5–7, 2016.

R. B. Konda, G. M. Pusbpanjali, N. Mulgi, and P. V Hunagund, “Microstrip Array Antenna for Multiband Operation,” Proc. Int. Conf. Microw., vol. 8, pp. 511–513, 2008.

R. H. A. Qadar Ramli, “Rancang Bangun Antena Mikrostrip Patch Array Segi Empat Triple – Band Pada Frekuensi 2,3, 3,3 GHz Dan 5,8 GHz,” pp. 72–77.

K. Fertas, H. Kimouche, M. Challal, H. Aksas, R. Aksas, and E. Nationale, “Multiband Microstrip Antenna Array for Modern Communication Systems,” IEEE, pp. 3–7, 2015.

D. Jabin, A. K. Singh, G. Srinivas, and V. S. Tripathi, “Double U-Slot Loaded Stacked Microstrip Patch Antenna with 2 × 2 Array for Multiband Operation,” IEEE, pp. 4–6, 2014.

A. J. Kalika Mehra, “Design And Analysis of L-slots With Rectangular Slot Multiband Microstrip Rectangular Patch Slot Multiband Microstrip Rectangular Patch Antenna,” Int. Conjerence Comput. Commun. Electron., pp. 549–552, 2017.

J. Alam, M. Rashed, I. Faruque, and M. Islam, “Design of a Split P-shaped Multiband Microstrip Patch antenna for Modern Communication System,” Int. Conf. Comput. Inf. Technol., pp. 68–71, 2016.

L. Sugadev, M, “A Compact multiple slot Microstrip Antenna for Modern Mobile Communications,” Int. Conf. Control. Instrumentation, Commun. Comput. Technol., pp. 805–808, 2016.

Firmansyah.T, S. Purnomo, F. Fatonah, T. Nugroho,”Antena Mikrostrip Rectangular Patch 1575,42 MHz dengan Polarisasi Circular untuk Receiver GPS”, Jurnal Nasional Teknik Elektro dan Teknologi Informasi (JNTETI),vol. 4, no. 4, Nov. 2015.

K. Alagiyawanna, T. C. Baum, K. Ghorbani, and K. J. Nicholson, “Embroidered Microwave Antennas for Aerospace Applications,” Proc. Asia-Pacific Microw. Conf., pp. 4–7, 2016.

Haidi Junas, “Desain dan Analisa Atena Mikrostrip Multiband 3 Patch bentuk Segiempat Menggunakan Array,” Amplifier, vol. 7, no. 2, pp. 1–7, 2017.




DOI: http://dx.doi.org/10.36055/setrum.v6i2.2590

Refbacks

  • There are currently no refbacks.