Hazard identification in fabrication industry using Hazard Identification and Risk Assessment (HIRA) and Job Safety Analysis (JSA)

Lely Herlina, Nustin Merdiana Dewantari, Atia Sonda, Moch. Rizky Mulyana

Abstract


Mild steel roofing is increasingly being used in simple construction processes. Prima Land Company dominates the lightweight steel roof market share in Pandeglang. However, accidents can come in its manufacturing process, and the potential hazards have yet to be fully measured. Therefore, this study aims to identify, assess, and provide risk control to prevent and reduce work accidents at Prima Land Company. The methods used are Hazard Identification and Risk Assessment (HIRA) and Job Safety Analysis (JSA). HIRA is used to identify the hazard in the mild steel roofing process area, whereas JSA is used to identify hazards in forklifts and lift operations. The results showed that eight activities have potential risks in manufacturing lightweight steel roofs and 16 risks in operating forklift machines and finished loading goods into vehicles. In the HIRA method, the risk category assessment is uniform. However, the highest risk of 38% is extreme risk for sand sprinkling activities, untied and closed plug cables or switches, and transfer of coil raw materials.

Keywords


Fabrication industry; Hazard identification; HIRA; JSA; Work accident

Full Text:

PDF (EN)

References


S. Indragiri and T. Yuttya, “Manajemen risiko K3 Menggunakan Hazard Identification Risk Assessment and Risk Control (HIRARC),” Jurnal Kesehatan, vol. 9, no. 1, pp. 1080–1094, 2020, doi: 10.38165/jk.v9i1.77.

J.-F. Zhang et al., “Mechanical-property tests on assembled-type light steel modular house,” Journal of Constructional Steel Research, vol. 168, p. 105981, May 2020, doi: 10.1016/j.jcsr.2020.105981.

N. Wahyuni, B. Suyadi, and W. Hartanto, “Pengaruh Keselamatan dan Kesehatan Kerja (K3) terhadap produktivitas kerja karyawan pada PT. Kutai Timber Indonesia,” J. Pendidik. Ekon. J. Ilm. Ilmu Pendidikan, Ilmu Ekon. dan Ilmu Sos., vol. 12, no. 1, p. 99, 2018, doi: 10.19184/jpe.v12i1.7593.

C. W. Nugroho, T. Pitana, and B. Dinariyana, “Risk analysis Using Job Safety Analysis-Fuzzy Integration for ship maintenance operation,” IPTEK The Journal for Technology and Science, vol. 31, no. 3, Nov. 2020, doi: 10.12962/j20882033.v31i3.5655.

X. Li, G. Chen, Y. Chang, and C. Xu, “Risk-based operation safety analysis during maintenance activities of subsea pipelines,” Process Safety and Environmental Protection, vol. 122, pp. 247–262, Feb. 2019, doi: 10.1016/j.psep.2018.12.006.

I. Rajkumar, K. Subash, T. Raj Pradeesh, R. Manikandan, and M. Ramaganesh, “Job safety hazard identification and risk analysis in the foundry division of a gear manufacturing industry,” Materials Today: Proceedings, vol. 46, pp. 7783–7788, 2021, doi: 10.1016/j.matpr.2021.02.326.

A. Ishak, Buchari, Asfriyati, and B. Nainggolan, “Risk analysis of occupational accidents and occupational diseases using the JSA (Job Safety Analysis) Method,” IOP Conference Series: Materials Science and Engineering, vol. 1003, no. 1, p. 012077, Dec. 2020, doi: 10.1088/1757-899x/1003/1/012077.

S. Larasati, S. Suroto, and B. Widjasena, “Analisis potensi bahaya dengan menggunakan metode HIRA (Hazard Identification And Risk Assessment) pada pabrik roti tawar X Boyolali,” Jurnal Kesehatan Masyarakat (Undip), vol. 9, no. 6, pp. 760–764, Nov. 2021, doi: 10.14710/jkm.v9i6.31383.

H. Hadef, B. Negrou, T. G. Ayuso, M. Djebabra, and M. Ramadan, “Preliminary hazard identification for risk assessment on a complex system for hydrogen production,” International Journal of Hydrogen Energy, vol. 45, no. 20, pp. 11855–11865, Apr. 2020, doi: 10.1016/j.ijhydene.2019.10.162.

A. Y. Ambarani and A. R. Tualeka, “Hazard Identification and Risk Assessment (HIRA) pada proses fabrikasi plate tanki 42-T-501a PT Pertamina (Persero) RU VI Balongan,” The Indonesian Journal of Occupational Safety and Health, vol. 5, no. 2, p. 192, May 2017, doi: 10.20473/ijosh.v5i2.2016.192-203.

S. Indrawati, A. D. Prabaswari, and M. A. Fitriyanto, “Risk control analysis of a furniture production activities using hazard identification and risk assessment method,” MATEC Web of Conferences, vol. 154, p. 01102, 2018, doi: 10.1051/matecconf/201815401102.

N. Chartres, L. A. Bero, and S. L. Norris, “A review of methods used for hazard identification and risk assessment of environmental hazards,” Environment International, vol. 123, pp. 231–239, Feb. 2019, doi: 10.1016/j.envint.2018.11.060.

E. Albrechtsen, I. Solberg, and E. Svensli, “The application and benefits of job safety analysis,” Safety Science, vol. 113, pp. 425–437, Mar. 2019, doi: 10.1016/j.ssci.2018.12.007.

Sunaryo and M. A. Hamka, “Safety risks assessment on container terminal using Hazard Identification and Risk Assessment and Fault Tree Analysis Methods,” Procedia Engineering, vol. 194, pp. 307–314, 2017, doi: 10.1016/j.proeng.2017.08.150.

AS/NZS 4360, Risk Management AS/NZS 4360:2004. 2004, p. 30.

M. Sugarindra, M. R. Suryoputro, and A. T. Novitasari, “Hazard Identification and Risk Assessment of health and safety approach JSA (Job Safety Analysis) in plantation company,” IOP Conference Series: Materials Science and Engineering, vol. 215, p. 012029, Jun. 2017, doi: 10.1088/1757-899x/215/1/012029.

W. Zheng, J. Shuai, and K. Shan, “The energy source based job safety analysis and application in the project,” Safety Science, vol. 93, pp. 9–15, Mar. 2017, doi: 10.1016/j.ssci.2016.11.009.

M. Palega, “Application of the Job Safety Analysis (JSA) Method to assessment occupational risk at the workplace of the laser cutter operator,” Management and Production Engineering Review, vol. 12, no. 3, pp. 40–50, 2021, doi: 10.24425/mper.2021.138529.

M. R. N. Irawan, “Pengaruh (K3) dan motivasi terhadap kinerja karyawan di perusahaan,” Ecopreneur.12, vol. 3, no. 1, Apr. 2020, doi: 10.51804/econ12.v3i1.676.

B. Suhardi, P. Widyo Laksono, A. Ayu V.E, J. Mohd.Rohani, and T. Shy Ching, “Analysis of the Potential Hazard Identification and Risk Assessment (HIRA) and Hazard Operability Study (HAZOP): Case Study,” International Journal of Engineering & Technology, vol. 7, no. 3.24, p. 1, Aug. 2018, doi: 10.14419/ijet.v7i3.24.17290.




DOI: http://dx.doi.org/10.36055/jiss.v8i2.17112

Refbacks

  • There are currently no refbacks.


  is supported by