Analysis of occupational health and safety at a maritime warehouse using Hazard Identification, Risk Assessment and Risk Control (HIRARC)

Asep Ridwan, Apriansyah Nuroni, Adelia Adelia, Atia Sonda

Abstract


This study aims to identify and determine risks and risks using the Hazard Identification Risk Assessment and Risk Control (HIRARC) method. By conducting prior monitoring and interviewing workers to find out the risks and impacts experienced by workers. Making a HIRARC table by assessing each aspect of hazards, work risks and controls that have been carried out and classifying controls based on 5 hierarchies. Data processing is conducted by analyzing the potential hazards with the HIRARC method. This study identified 12 potential hazards at Gandasari Energy. The findings of 12 risks can be carried out by risk with a hierarchy where there are 5 risk control efforts, including elimination, substitution, engineering control, administrative control, and personal protective equipment. Of the 12 potential hazards, many workers still do not use Personal Protective Equipment (PPE). The importance of PPE is to minimize the occurrence of work accidents.

Keywords


HIRARC; Hierarchy; Potential hazard; Risk Assessment; Risk Control; Health protective equipment

Full Text:

PDF (EN)

References


F. Saputra and M. R. Mahaputra, “Building occupational safety and health (K3): Analysis of the work environment and work discipline,” Journal of Law, Politic and Humanities, vol. 2, no. 3, pp. 105–114, 2022, doi: 10.38035/jlph.v2i3.91.

S. Oktavianus, A. Waruwu, and A. C. Sembiring, “Minimizing work accidents in the shipyarding industry using JSA and HAZOP methods,” JKIE (Journal Knowledge Industrial Engineering), vol. 9, no. 2, pp. 82–88, Aug. 2022, doi: 10.35891/jkie.v9i2.3287.

A. Rae and D. Provan, “Safety work versus the safety of work,” Safety Science, vol. 111, pp. 119–127, Jan. 2019, doi: 10.1016/j.ssci.2018.07.001.

K. Wojtasik, “New Impulse, New Challenges. Safety Procedures in a Production Enterprise. A Case Study,” System Safety: Human - Technical Facility - Environment, vol. 2, no. 1, pp. 26–32, Mar. 2020, doi: 10.2478/czoto-2020-0004.

R. Firmansyah, S. Sismulyanto, and N. Nurwijayanti, “Analysis of factors that affect employee work accidents at PT. Windu Blambangan Sejati (WBS) Banyuwangi Regency 2018,” Journal for Quality in Public Health, vol. 3, no. 2, pp. 300–308, May 2020, doi: 10.30994/jqph.v3i2.77.

H. Ponda and N. F. Fatma, "Hazard identification, assessment and control of occupational safety and health (K3) risks at the Foundry Department of PT. Sicamindo," Heuristic, vol. 16, no. 2, pp. 62-74, 2019, doi: 10.30996/he.v16i2.2968.

F. Sulaiman, A. Ridwan, P. F. Ferdinant, and B. Rofi, “Rancangan penilaian risiko limbah bahan berbahaya dan beracun (B3) dengan pendekatan Hazard Identification Risk AssessmenT (HIRA),” FLYWHEEL : Jurnal Teknik Mesin Untirta, vol. 1, no. 1, p. 44, Oct. 2019, doi: 10.36055/fwl.v1i1.6446.

G. Smarandana, A. Momon, and J. Arifin, “Penilaian risiko K3 pada Proses pabrikasi menggunakan metode Hazard Identification, Risk Assessment and Risk Control (HIRARC),” Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 7, no. 1, pp. 56–62, Jun. 2021, doi: 10.30656/intech.v7i1.2709.

B. Novtantino, “Work safety risk analysis using HIRARC method in iron production area PT. Java Rakindo,” Al Qalam: Jurnal Ilmiah Keagamaan dan Kemasyarakatan, vol. 16, no. 5, p. 1611, Jun. 2022, doi: 10.35931/aq.v16i5.1191.

H. Wu and J. Zhao, “An intelligent vision-based approach for helmet identification for work safety,” Computers in Industry, vol. 100, pp. 267–277, Sep. 2018, doi: 10.1016/j.compind.2018.03.037.

C. Bejinariu, D.-C. Darabont, E.-R. Baciu, I.-S. Georgescu, M.-A. Bernevig-Sava, and C. Baciu, “Considerations on applying the method for assessing the level of safety at work,” Sustainability, vol. 9, no. 7, p. 1263, Jul. 2017, doi: 10.3390/su9071263.

T. A. Arcury et al., “Work safety climate, personal protection use, and injuries among Latino residential roofers,” American Journal of Industrial Medicine, vol. 58, no. 1, pp. 69–76, Nov. 2014, doi: 10.1002/ajim.22404.

B. Yanar, M. Lay, and P. M. Smith, “The Interplay between supervisor safety support and occupational health and safety vulnerability on work injury,” Safety and Health at Work, vol. 10, no. 2, pp. 172–179, Jun. 2019, doi: 10.1016/j.shaw.2018.11.001.

A. Hedlund, K. Gummesson, A. Rydell, and I.-M. Andersson, “Safety motivation at work: Evaluation of changes from six interventions,” Safety Science, vol. 82, pp. 155–163, Feb. 2016, doi: 10.1016/j.ssci.2015.09.006.

A. Purwanto, A. W. Rizqi, and H. Hidayat, “Work Accident analysis using Hirarc Method (Hazard Identification, Risk Assessment and Risk Control) in maintenance division CV. Prosperous Utama Dira,” Jurnal Teknovasi, vol. 9, no. 01, pp. 1–8, Apr. 2022, doi: 10.55445/jt.v9i01.32.

A. M. Saedi, J. J. Thambirajah, and A. Pariatamby, “A HIRARC model for safety and risk evaluation at a hydroelectric power generation plant,” Safety Science, vol. 70, pp. 308–315, Dec. 2014, doi: 10.1016/j.ssci.2014.05.013.

R. D. Putra, B. Sukandari, and W. Wihartono, “Risk management of occupational safety and health in kri docking project using Hazard Identification, Risk Assessment And Risk Control (HIRARC) method case study: PT. PAL Indonesia,” JOURNAL ASRO, vol. 10, no. 2, p. 76, Jul. 2019, doi: 10.37875/asro.v10i2.131.

N. M. Dewantari, A. Umyati, and F. Falah, “Hazard identification risk assessment and risk control (HIRARC) pada pembangunan gedung business center,” Journal Industrial Servicess, vol. 8, no. 1, p. 1, Apr. 2022, doi: 10.36055/jiss.v8i1.14405.

W. J. Pamungkas and R. Fitriani, “Analisis potensi kecelakaan kerja di pabrik peralatan pertanian dengan hazard identification risk assesment and risk control (HIRARC),” Journal Industrial Servicess, vol. 8, no. 1, p. 7, Apr. 2022, doi: 10.36055/jiss.v8i1.14132.

S. Fauziyah, R. Susanti, and F. Nurjihad, “Risk assessment for occupational health and safety of Soekarno-Hatta international airport accessibility project through HIRARC method,” IOP Conference Series: Earth and Environmental Science, vol. 700, no. 1, p. 012048, Mar. 2021, doi: 10.1088/1755-1315/700/1/012048.

T. Ihsan, S. A. Hamidi, and F. A. Putri, “Penilaian risiko dengan metode HIRADC pada pekerjaan konstruksi gedung kebudayaan Sumatera Barat,” Jurnal Civronlit Unbari, vol. 5, no. 2, p. 67, Oct. 2020, doi: 10.33087/civronlit.v5i2.67.

D. O. Santoso, Moh. D. Kurniawan, and H. Hidayat, “Analisa risiko keselamatan dan kesehatan kerja menggunakan metode HIRARC di PT. Inhutani 1 UMI Gresikhutani 1 UMI Gresik,” Jurnal Media Teknik dan Sistem Industri, vol. 6, no. 1, p. 12, Mar. 2022, doi: 10.35194/jmtsi.v6i1.1580.

D. J. Provan, A. J. Rae, and S. W. A. Dekker, “An ethnography of the safety professional’s dilemma: Safety work or the safety of work?,” Safety Science, vol. 117, pp. 276–289, Aug. 2019, doi: 10.1016/j.ssci.2019.04.024.

A. Ridwan, F. Sulaiman, D. L. Trenggonowati, and J. D. Marbun, “Penilaian risiko penyimpanan produk bahan berbahaya dan beracun (B3) dengan pendekatan HIRA, FTA, dan 6S,” Teknika: Jurnal Sains dan Teknologi, vol. 15, no. 2, p. 119, Nov. 2019, doi: 10.36055/tjst.v15i2.6449.

A. S. Putri and U. A. Nuruddin, “Occupational safety and health at metal casting company,” Journal of Engineering and Applied Technology, vol. 3, no. 2, pp. 80–86, Sep. 2022, doi: 10.21831/jeatech.v3i2.52482.




DOI: http://dx.doi.org/10.36055/jiss.v8i2.17293

Refbacks

  • There are currently no refbacks.


  is supported by