Analysis of occupational safety and health at chemical manufacturer with HIRARC method

Adinda Suchieyati Sahara, Dene Herwanto, Billy Nugraha

Abstract


PT Timuraya Tunggal is a leading supplier and manufacturer of chemical products. Within its operations, potential hazards exist, notably in the sulfuric acid production section, necessitating the role of occupational safety and health to prevent and mitigate accidents. This research adopts a qualitative descriptive approach, utilizing both primary and secondary data sources. The collected data undergoes processing using the HIRARC method, identifying hazards primarily through direct observation in the burner process. The results and discussions of this study conclude the identification of two potential hazards in the burner process at PT Timuraya Tunggal, comprising one low-risk, two moderate-risk, and one high-risk hazard. Control recommendations proposed for the burner process include administrative controls such as avoiding the burner area unnecessarily, installing guardrails, mandating the use of respirator masks and scrubbers, and implementing the use of caustic soda for SO2 neutralization. Additionally, a suggested control for the burner process involves prominently displaying warning signs indicating 'hot surfaces, do not touch.

Keywords


HIRARC; Risk Assessment; Risk Control; Hazard Identification; Occupational safety and health

Full Text:

PDF

References


D. Desianna and P. Yushananta, “Penilaian Risiko Kerja Menggunakan Metode Hirarc Di Pt. Sinar Laut Indah Natar Lampung Selatan,” Ruwa Jurai J. Kesehat. Lingkung., vol. 14, no. 1, p. 26, 2020, doi: 10.26630/rj.v14i1.2147.

P. Giananta, J. Hutabarat, and Soemanto, “Analisa Potensi Bahaya Dan Perbaikan Sistem Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. Boma Bisma Indra,” J. Valtech (Jurnal Mhs. Tek. Ind., vol. 3, no. 2, pp. 106–110, 2020.

Ghika Smarandana, Ade Momon, and Jauhari Arifin, “Penilaian Risiko K3 pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC),” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 7, no. 1, pp. 56–62, 2021, doi: 10.30656/intech.v7i1.2709.

F. M. Khudhory, L. D. Fathimahhayati, and T. A. Pawitra, “Analisis Risiko Kecelakaan Kerja Dengan Metode HIRARC,” Tekinfo J. Ilm. Tek. Ind. dan Inf., vol. 10, no. 2, pp. 66–75, 2022, doi: 10.31001/tekinfo.v10i2.1329.

I. Rahmanto and M. I. Hamdy, “Analisa Resiko Kecelakaan Kerja Karawang Menggunakan Metode Hazard and Operability (HAZOP) di PT PJB Services PLTU Tembilahan,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 2, pp. 53–60, 2022.

K. Y. Asmara and R. Purwaningsih, “Analisis Potensi Risiko Keselamatan Dan Kesehatan Kerja Dengan Metode Hazard Identification, Risk Assessment, and Risk Control (Hirarc) Pada Bengkel Produksi Cv Javatech Agro Persada,” Semin. dan Konf. Nas. IDEC, pp. 2579–6429, 2021.

A. Ulimaz, “Analisis Keselamatan dan Kesehatan Kerja pada Stasiun Loading Ramp dengan Metode HIRARC di PT. XYZ,” INSOLOGI J. Sains dan Teknol., vol. 1, no. 3, pp. 268–279, 2022, doi: 10.55123/insologi.v1i3.573.

S. N. Trisaid, “Analisis Risiko Kecelakaan Kerja Pada Kegiatan Rig Service Menggunakan Metode Hirarc Dengan Pendekatan Fta,” J. Ilm. Tek. Ind., vol. 8, no. 1, pp. 25–33, 2020, doi: 10.24912/jitiuntar.v8i1.6343.

B. F. Aprilla and D. Yulhendra, “Penerapan Metode HIRARC dalam Menganalisis Risiko Bahaya dan Upaya Pengendalian Kecelakaan Kerja di Area Crusher dan Belt Conveyor PT. Semen Padang,” Bina Tambang, vol. 8, no. 1, pp. 203–212, 2023.

R. M. Zein, M. Jufriyanto, and Y. Pandu, “Manjemen Risiko Pada Proses Produksi Tanki Air: Metode Hazard Identification Risk Assessment Risk Control (HIRARC),” Gn. Malang, Randu Agung, Kec. Kebomas. Kab. Gresik, vol. 19, no. 2, p. 61121, 2022.

H. Mauliyani et al., “Identifikasi Risiko Keselamatan Kerja Metode (HIRARC) Pada Tahap Pembuatan Tangki Di PT. Gemala Saranaupaya,” Environ. Occup. Heal. Saf. J., vol. 2, no. 2, pp. 163–174, 2022.

A. Wahid, M. Munir, and A. R. Hidayatulloh, “Analisis Resiko Kecelakaan Kerja Menggunakan Metode HIRARC PT. SPI,” J. Ind. View, vol. 2, no. 2, pp. 45–52, 2020, doi: 10.26905/4880.

M. Nur, “Analisis Tingkat Risiko Kesehatan Dan Keselamatan Kerja (K3) Dengan Menggunakan Metode Hirarc Di Pt. Xyz,” J. Tek. Ind. Terintegrasi, vol. 4, no. 1, pp. 15–20, 2021, doi: 10.31004/jutin.v4i1.1937.

D. O. Santoso, M. D. Kurniawan, and H. Hidayat, “Analisa Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC di PT. INHUTANI 1 UMI GRESIKHUTANI 1 UMI GRESIK,” J. Media Tek. dan Sist. Ind., vol. 6, no. 1, p. 12, 2022, doi: 10.35194/jmtsi.v6i1.1580.

K. P. Sari, M. Chairi, and R. P. Helin, “Analisis Risiko K3 Pada Proyek Gedung Rsud Pasaman Barat Dengan Metode Hirarc,” J. Rivet, vol. 2, no. 01, pp. 25–31, 2022, doi: 10.47233/rivet.v2i01.491.

R. A. Permatasari and I. Nurisusilawati, “Analisis Risiko Kecelakaan Kerja pada Pabrik 1 PT. Perhutani Pine Chemical Industry Menggunakan Metode HAZOP,” J. TRINISTIK J. Tek. Ind. Bisnis Digit. dan Tek. Logistik, vol. 1, no. 1, pp. 9–15, 2022, doi: 10.20895/trinistik.v1i1.441.

A. Redana and T. Oktiarso, “Identifikasi Potensi Bahaya Menggunakan Metode Pendekatan Hirarc Hazard Identification Risk Assessment and Risk Control Pada Industri Rumahan Produksi Tahu 151a,” Sainsbertek J. Ilm. Sains Teknol., vol. 2, no. 2, pp. 42–52, 2022, doi: 10.33479/sb.v2i2.146.

R. Indrayani, J. Sastradiharja, and M. Rosanah, “Identifikasi Resiko Kerja Menggunakan Metode Hirarc Pada Umkm Tahu Di Bandung,” Sist. (Jurnal Ilm. Nas. Bid. Ilmu Tek., vol. 9, no. 01, pp. 23–27, 2021, doi: 10.53580/sistemik.v9i01.52.

R. A. Imran, “Identifikasi Hazard Proses Produksi Billet Pada Area Tungku Peleburan Dengan Metode Hirarc (Studi Kasus: Pt. Xyz),” J. Ilm. Tek. Ind., vol. 8, no. 3, p. 153, 2021, doi: 10.24912/jitiuntar.v8i3.6676.

A. A. Hidayat, “Analisis Program Keselamatan Kerja Dalam Usaha Meningkatkan Produktivitas Kerja Dengan Pendekatan HIRARC Dan FTA (Studi Kasus: PT Mitra Karsa Utama),” SIJIE Sci. J. Ind. Eng., vol. 1, no. 2, pp. 1–6, 2020, [Online]. Available: https://jim.unindra.ac.id/index.php/sijie/article/view/86

Muhammad Nur, Verly Valentino, Resy Kumala Sari, and Abdul Alimul Karim, “Analisa Potensi Bahaya Kecelakaan Kerja Terhadap Pekerja Menggunakan Metode Hazard Identification, Risk Assement And Risk Control (HIRARC) Pada Perusahaan Aspal Beton,” J. Teknol. dan Manaj. Ind. Terap., vol. 2, no. 3, pp. 150–158, 2023, doi: 10.55826/tmit.v2i3.179.




DOI: http://dx.doi.org/10.36055/jiss.v9i2.21855

Refbacks

  • There are currently no refbacks.


  is supported by