Prototype of blood sugar measuring instrument with non invasive method using near infrared

Irma Saraswati, Muhammad Fikri Dzaky, Heri Haryanto

Abstract


At present the measurement of blood sugar still uses an invasive tool, this disrupts the patient's comfort and can cause infection and pain. So that a non-invasive tool is needed to measure blood sugar. Tool testing was done by measuring blood sugar levels in 35 patients and seeing a correlation between the value of blood sugar levels with ADC. The test results showed that the value of changes in blood sugar levels followed y = -0.146x + 164.89 Coefficient value R = 0.9233 The value of the accuracy of the tool was 91.086% and the precision of 94.3026%. Blood sugar measuring devices that have been designed to monitor the blood sugar of users by using the internet. This blood sugar meter cannot be used as a reference for the actual blood sugar level. However, the realization of this tool can still determine a rough estimate of the high and low levels of sugar in the blood.

Keywords


Blood sugar; blood sugar measuring; non-invasive

Full Text:

PDF

References


Kementrian Kesehatan Republik Indonesia. (2013). Diabetes Melitus Penyebab Kematian Nomor 6 di Dunia” [Online]. Available: http://www.depkes.go.id. [Accessed: 21-Feb-2018].

Kementrian Kesehatan Republik Indonesia. (2016). Mari Kita Cegah Diabetes dengan Cerdik,”[Online]. Available: http://www.depkes.go.id. [Accessed: 21-Feb-2018]

Pande, M. C., & Joshi, A. K., (2013). Non-invasive Optical Blood Glucose Measurement. International Journal of Engineering Research and Applications (IJERA), Vol. 3, No. 4, pp. 129-131.

Yadav, J., Rani, A., Singh, V., & Murari, B. M. (2014). Near-infrared LED based non-invasive blood glucose sensor. In 2014 International Conference on Signal Processing and Integrated Networks, SPIN 2014 (pp. 591-594). Article 6777023 (2014 International Conference on Signal Processing and Integrated Networks, SPIN 2014). IEEE. https://doi.org/10.1109/spin.2014.6777023.

Khairunisa, Z., Irzaman, I., Arief, A. (2014). Rancang Bangun Alat Ukur Kadar Gula Darah Non-Invasive Berbasis Sensor Fotodioda. Bogor Agricultural University (IPB). http://repository.ipb.ac.id/handle/123456789/73445

Bobade, R. D., & Patil, M. S. (2016). Non-invasive Blood Glucose Level Monitoring System for Diabetic Patients using Near-Infrared Spectroscopy. Computer Science and Information Technology, 4.

Olokoba, A. B., Obateru, O. A., & Olokoba, L. B. (2012). Type 2 diabetes mellitus: a review of current trends. Oman medical journal, 27(4), 269–273. https://doi.org/10.5001/omj.2012.68

Saleh, G., Alkaabi, F., Al-Hajhouj, N., Al-Towailib, F., & Al-Hamza, S. (2018). Design of non-invasive glucose meter using near-infrared technique. Journal of medical engineering & technology, 42(2), 140–147. https://doi.org/10.1080/03091902.2018.1439114

Lai, J., Huang, S., Lin, R., & Tsai, S. (2016). Design a non-invasive near-infrared LED blood glucose sensor. 2016 International Conference on Applied System Innovation (ICASI), 1-4.

Kaur, J., Kumar, J., Sardana, H.K., Bhatnagar, R., & Mehla, N.S. (2009). NON INVASIVE BLOOD GLUCOSE MEASUREMENT USING OPTICAL METHOD: FEASIBILITY STUDY AND DESIGN ISSUES.

Lawand, K., Parihar, M., & Patil, S. (2015). Design and development of infrared LED based non invasive blood glucometer. 2015 Annual IEEE India Conference (INDICON), 1-6.




DOI: http://dx.doi.org/10.62870/tjst.v20i1.23146

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Teknika: Jurnal Sains dan Teknologi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License

Teknika: Jurnal Sains dan Teknologi is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.