Evaluation analysis of the implementation of Indonesian national work competency standards for occupational safety and health in Jakarta vocational high schools

Nike Naluri, Agus Suroso, Mawardi Amin

Abstract


Every activity has the potential for work accidents, so work safety and health is the responsibility of everyone and all agencies. The implementation of occupational safety and health is influenced by the environment, characteristics and rules for implementing occupational safety and health. Vocational high schools are one of the educational institutions that have the potential for accidents and vocational high schools aim to prepare students who are ready to work. Lack of understanding and implementation of occupational safety and health in vocational high schools results in accidents among students. Based on this, research was conducted entitled "Evaluation analysis of the implementation of the Indonesian National Work Competency Standards (SKKNI) for occupational safety and health in Jakarta vocational high schools. This research is a type of quantitative research with primary data sources using questionnaires. Data analysis techniques are validity and reliability tests, percentage, normality, linearity, correlation and regression. The results of this research concluded that the implementation of occupational safety and health in Jakarta vocational high schools was categorized as poor, then the SKKNI factors that influenced the frequency of work accidents were measuring hazard factors in the workplace, managing personal protective equipment (PPE) in the workplace, and implementing occupational safety and health risk management but the factor of managing personal protective equipment (PPE) in the workplace is the variable that has the most influence on the frequency of work accidents at Jakarta vocational high schools.

 


Keywords


Implementation; Occupational Safety and Health; Indonesian National Work Competency Standards; Vocational High Schools

References


Amirudin and M. Yahya, “Analisis Validitas Dokumen SKL, KI dan KD Keselamatan, Kesehatan dan Kerja (K3) Berbasis Higher Order Thinking Skills Pada Kurikulum Sekolah Menengah Kejuruan,” Pros. Semin. Nas. Lemb. Penelit. Univ. Negeri Makassar “Diseminasi Has. Penelit. melalui Optim. Sinta dan Hak Kekayaan Intelekt., vol. 8, pp. 1006–1012, 2019, [Online]. Available: https://ojs.unm.ac.id/semnaslemlit/article/view/13737

Febriawati Henni, Angraini Wulan, Wijaya Kusuma Andri, Sartika A, Oktarianita, and Sarkawi, “Pendidikan Kesehatan Dan Pelatihan Tanggap Bencana Gempa Pada Guru,” J. Pengandian Masy. Ipteks, vol. 6, no. 1, pp. 79–87, 2020, [Online]. Available: http://jurnal.unmuhjember.ac.id/index.php/PENGABDIAN_IPTEKS/article/viewFile/3736/2797

Subijanto, A. A. Sulistyono, and Mariani, “PENINGKATAN SIKAP DAN DISIPLIN SISWA SMK MENGGUNAKAN ALAT PELINDUNG DIRI DALAM PEMBELAJARAN K3,” J. Penelit. Kebijak. Pendidik., vol. 13, no. 2, pp. 93–108, Dec. 2020, doi: 10.24832/jpkp.v13i2.364.

A. Kondisi, D. A. N. Pengendalian, and B. Di, “Analisis Kondisi Dan Pengendalian Bahaya Di Bengkel/ Laboratorium Sekolah Menengah Kejuruan,” J. Pendidik. Teknol. dan Kejuru. UNY, vol. 20, no. 2, p. 163984, 2015, doi: 10.21831/jptk.v20i2.3319.

S. A. Binol, Hasmah, and F. L. Desei, “Analisis Kebutuhan Pengetahuan Keselamatan dan Kesehatan Kerja (K3) Terhadap Siswa Praktik Kerja Industri di SMK Negeri 1 Kaidipang,” J. Tek., vol. 17, no. 2, pp. 106–112, Dec. 2019, doi: 10.37031/jt.v17i2.51.

B. Thewodros, “Occupational hazards in construction industries:Case study from Housing and construction workers at Addis Ababa,” Int. J. Res., vol. 4, no. 9, pp. 84–96, 2016, doi: 10.5281/zenodo.158970.

N. A. Djaali, S. Usman, R. Agustino, and F. H. Simaibang, “Penerapan Kesehatan dan Keselamatan Kerja (K3) Melalui Sosialisasi Potensi Bahaya di Sekolah,” J. Pemberdaya. Komunitas MH Thamrin, vol. 2, no. 1, pp. 34–43, Mar. 2020, doi: 10.37012/jpkmht.v2i1.290.

A. Nurmala and S. Hardjomuljadi, “Penyebab Dan Dampak Variation Order ( VO ) Pada Pelaksanaan Proyek Konstruksi,” J. Konstr., vol. Volume 6 N, no. 2, pp. 63–77, 2015.

T. M. Fadillah and A. Suherman, “STANDAR KESEHATAN DAN KESELAMATAN KERJA (K3) INDUSTRI PADA PEMBELAJARAN PRAKTIK PEMESINAN DI SMK,” 2019.

P. Keselamatan et al., “PENERAPAN KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PRAKTIK KERJA LAS SISWA KELAS X PROGRAM KEAHLIAN TEKNIK KENDARAAN RINGAN SMK TAMANSISWA JETIS YOGYAKARTA,” 2021. [Online]. Available: https://kemnaker.go.id/news/detail

M. Raudhatin Jannah, S. El Unas, and M. Hamzah Hasyim, “ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA (K3) MELALUI PENDEKATAN HIRADC DAN METODE JOB SAFETY ANALYSIS PADA STUDI KASUS PROYEK PEMBANGUNAN MENARA X DI JAKARTA (Risk Analysis of Occupational and Safety Using HIRADC Approach and Job Safety Analysis Method in the Case Study of Tower Project X in Jakarta).”

L. Schenk and A. Antonsson, “Implementation of the chemicals regulation REACH – Exploring the impact on occupational health and safety management among Swedish downstream users,” Saf. Sci., vol. 80, pp. 233–242, 2015, doi: 10.1016/j.ssci.2015.08.001.

H. Dermawan and H. Wijaya, “Kajian Terhadap Pemeliharaan Gedung-Gedung Perkantoran Di Jakarta Pusat Dengan Usia Di Atas 20 Tahun,” J. Tek. dan Ilmu Komput., vol. 7, no. 28, pp. 379–388, 2018, [Online]. Available: http://ejournal.ukrida.ac.id/ojs/index.php/TIK/article/viewFile/1603/1699

S. Hardjomuljadi, S. Advisor, M. Ministry, and P. W. Email, “CHANCE AND DESIRE ,”.

D. Komarudin, W. S. Kuswana, and R. A. M. Noor, “KESEHATAN DAN KESELAMATAN KERJA DI SMK,” 2016.

D. Liu and J. Gambatese, “Student Education and Training Needs for Safety in Roadway Engineering Fieldwork,” J. Prof. Issues Eng. Educ. Pract., vol. 144, no. 4, Oct. 2018, doi: 10.1061/(ASCE)EI.1943-5541.0000394.

G. B. HM, “Analisis Risiko Keselamatan dan Kesehatan Kerja Pada Pemeliharaan dan Perawatan Sistem Utilitas Bangunan Gedung Icon Mall Gresik,” J. Rekayasa Sist. Ind., vol. 10, no. 1, pp. 55–66, 2021, doi: 10.26593/jrsi.v10i1.4387.55-66.

س. ن. ع. س. و. ح. بارانی, “No Titleبررسی فلور و پراکنش جغرافیایی گیاهان در ارتباط با اقلیم در مراتع منطقه ایرانشهر استان,” vol. 148, pp. 148–162.

S. M. Amin, “Effect of An Educational Intervention About Occupational Safety on Knowledge and Practices of Male Students in Technical Mechanical Secondary Schools in El-Behira Governorate,” vol. 80, no. 6, pp. 21–44, 2020, doi: 10.7176/JHMN/80-05.

B. Triatmidi, “KONTRIBUSI PEMAHAMAN DAN SIKAP GURU TENTANG K3 TERHADAP PELAKSANAAN K3 DALAM PEMBELAJARAN PRAKTIK DI BENGKEL MEKANIK OTOMOTIF SE-KOTA MALANG.”

C. Novianus and N. Musniati, “INCREASING UNDERSTANDING OF OCCUPATIONAL HEALTH AND SAFETY (OHS) THROUGH RISK ASSESSMENT TRAINING ON VOCATIONAL SCHOOL STUDENTS IN RANGKASBITUNG DISTRICT.”

P. N. Okonkwo and J. Wium, “Health and Safety Management Systems within Construction Contractor Organizations: Case Study of South Africa,” J. Constr. Eng. Manag., vol. 146, no. 5, May 2020, doi: 10.1061/(asce)co.1943-7862.0001833.

C. Ferreira, L. C. Neves, A. Silva, and J. de Brito, “Stochastic maintenance models for ceramic claddings,” Struct. Infrastruct. Eng., vol. 16, no. 2, pp. 247–265, 2020, doi: 10.1080/15732479.2019.1652657.

D. Prayogi Dwi Agus Sudjimat Rina Rifqie Mariana, “PENGEMBANGAN BAHAN AJAR K3 DAN HIGIENE SANITASI BERBASIS PBL UNTUK MENINGKATKAN HASIL BELAJAR SISWA SMK.”

I. W. G. E. Triswandana and N. K. Armaeni, “Penilaian Risiko K3 Konstruksi Dengan Metode Hirarc,” vol. 4, no. 1, pp. 2581–2157, 2020, doi: 10.30737/ukarst.v3i2.

Y. Bagus et al., “RISK ASSESSMENT K3 PADA PROSES PENGOPERASIAN SCAFFOLDING PADA PROYEK APARTEmEN PT. X DI SURABAYA.”

X. Ma, F. Xiong, T. O. Olawumi, N. Dong, and A. P. C. Chan, “Conceptual Framework and Roadmap Approach for Integrating BIM into Lifecycle Project Management,” J. Manag. Eng., vol. 34, no. 6, p. 05018011, 2018, doi: 10.1061/(asce)me.1943-5479.0000647.

R. Minawati, H. P. Chandra, and P. Nugraha, “6575-12342-1-Pb,” Manfaat Pengguna. Softw. Tekla Build. Inf. Model. Pada Proy. Des. - Build, pp. 1–8, 2017.

Bambang Sudarsono, “Pelatihan Kesehatan Dan Keselamatan Kerja (K3) Sebagai Upaya Pencegahan Resiko Kecelakaan Kerja Bagi Calon Tenaga Kerja Otomotif di Era Pandemi,” JURPIKAT (Jurnal Pengabdi. Kpd. Masyarakat), vol. 2, no. 3, pp. 566–577, Dec. 2021, doi: 10.37339/jurpikat.v2i3.763.

A. D. Saputra et al., “Models of Physical Hazard Risk in University Located perguruan tinggi Akademi Komunitas Semen Indonesia – Gresik atau disingkat dengan AKSI-Gresik yang merupakan PT Semen Indonesia ( Perser,” Anal. PENGARUH KEPUASAN KERJA DAN IKLIM Organ. TERHADAP KEINGINAN KELUAR (INTENTION TO QUIT) DENGAN KOMITMEN Organ. SEBAGAI Var. Interv. (Pada Perusah. Perkeb. Kelapa Sawit TELADAN PRIMA GROUP), vol. 10, no. 1, pp. 75–81, 2019, [Online]. Available: nika.anitas@gmail.com

R. Pratiwi, “Analisis Sistem Pengendalian Internal,” SlideShare, p. 1, 2018, [Online]. Available: https://www.slideshare.net/RiriPratiwi2/15-si-pi-riri-pratiwi-prof-hapzi-analisis-sistem-pengendalian-internal-persediaan-pada-toko-baju-xyz-di-itc-cipulir-universitas-mercu-buana-2018-pdf




DOI: http://dx.doi.org/10.62870/tjst.v20i1.24002

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Teknika: Jurnal Sains dan Teknologi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License

Teknika: Jurnal Sains dan Teknologi is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.