Effect Of Titanium On Corrosion Behavior Of Aluminum Alloy 3104 As a Candidate Material For Radiator Combustion Engines

Arief Syarifuddin Fitrianto, Bambang Soegijono, Caing Caing, Hamdan Akbar Notonegoro

Abstract


Aluminum Alloy 3104 is aluminum usually used for beverage can. By modifying the content of Titanium content in the alloy, it is expected that this material will be suitable for radiator engine combustion. Especially for its corrosion behavior in coolant solution. Aluminum alloy with different content of Titanium was investigated on its crystal structure, morphology and its corrosion behavior in ethylene glycol solution which is usually used as additive in coolant water. X-ray diffractometer, Electron microscope and potentiodynamic were used to investigate the crystal structure, morphology and corrosion behavior respectively. The results show (002) crystal plane dominate the surface of the sample as the Titanium increase. The (111) and (002) crystal plane are very low compare to (022) crystal plane. Crystallite size and micro strain are affected by addition of Titanium. Surface morphology are clearly affected by the addition of Titanium. Addition of Titanium causes corrosion behavior of the samples. It concludes that the aluminum alloy with different Titanium content in this research, can be used for making radiator combustion engine.

Keywords


corrosion, titanium, Aluminum Alloy, Radiator

Full Text:

PDF

References


C. Vargel, Corrosion of Aluminium, Elsevier, 2004.

R. T. Bohacz, Engine Cooling Systems HP1425: Cooling System theory, Design and Performance for Drag Racing, Road Racing, Circle Track, Street Rods, Musclecars, Imports, OEM Cars, Trucks, RVs and Tow Vehicles, Penguin, 2007.

C. Mesa, Engine Coolants, Technology Transfer Systems, Inc, 2002.

O. K. Abiola and J. O. E. Otaigbe, “Efect of common water contaminants on the corrosion of aluminium alloys in ethylene glycol-water solution,” Corrosion Science, vol. 50, no. 1, pp. 242– 247, 2008. [

J. Zaharieva, M. Milanova, M. Mitov, L. Lutov, S. Manev, and D. Todorovsky, “Corrosion of aluminium and aluminium alloy in ethylene glycol-water mixtures,” Journal of Alloys and Compounds, vol. 470, no. 1-2, pp. 397–403, 2009.

L. Niu and Y. F. Cheng, “Synergistic efects of fuid fow and sand particles on erosion-corrosion of aluminum in ethylene glycolwater solutions,” Wear, vol. 265, no. 3-4, pp. 367–374, 2008.

R. M. Bandeira, J. van Drunen, A. C. Garcia, and G. TremiliosiFilho, “Infuence of the thickness and roughness of polyaniline coatings on corrosion protection of AA7075 aluminum alloy,” Electrochimica Acta, vol. 240, pp. 215–224, 2017.

M. Mrad, Y. Ben Amor, L. Dhouibi, and M. F. Montemor, “Corrosion prevention of AA2024-T3 aluminum alloy with a polyaniline/poly(�-glycidoxypropyltrimethoxysilane) bi-layer coating: Comparative study with polyaniline mono-layer feature,” Surface and Coatings Technology, vol. 337, pp. 1–11, 2018.

C. Verma, E. E. Ebenso, and M. A. Quraishi, “Ionic liquids as green and sustainable corrosion inhibitors for metals and alloys: An overview,” Journal of Molecular Liquids, vol. 233, pp. 403– 414, 2017.

A. K. Maayta and N. A. F. Al-Rawashdeh, “Inhibition of acidic corrosion of pure aluminum by some organic compounds,” Corrosion Science, vol. 46, no. 5, pp. 1129–1140, 2004.

V. Palanivel, Y. Huang, and W. J. Van Ooij, “Efects of addition of corrosion inhibitors to silane flms on the performance of AA2024-T3 in a 0.5 M NaCl solution,” Progress in Organic Coatings, vol. 53, no. 2, pp. 153–168, 2005.

R. Rosliza, W. B. Wan Nik, and H. B. Senin, “Te efect of inhibitor on the corrosion of aluminum alloys in acidic solutions,” Materials Chemistry and Physics, vol. 107, no. 2-3, pp. 281–288, 2008.

M. Asadikiya and M. Ghorbani, “Efect of inhibitors on the corrosion of automotive aluminum alloy in ethylene glycolwater mixture,” Corrosion, vol. 67, no. 12, pp. 1260011–1260015, 2011.

S. K. Sharma, A. Peter, and I. B. Obot, “Potential of Azadirachta indica as a green corrosion inhibitor against mild steel, aluminum, and tin: a review,” Journal of Analytical Science and Technology, vol. 6, no. 1, p. 26, 2015.

M. A. Deyab, R. Essehli, and B. El Bali, “Performance evaluation of phosphite NaCo(H2PO3)3⋅H2O as a corrosion inhibitor for aluminum in engine coolant solutions,” RSC Advances, vol. 5, no. 60, pp. 48868–48874, 2015.

Y. Liu and Y. F. Cheng, “Efects of coolant chemistry on corrosion of 3003 aluminum alloy in automotive cooling system,” Materials and Corrosion, vol. 61, no. 7, pp. 574–579, 2009.




DOI: http://dx.doi.org/10.36055/fwl.v0i0.10855

Refbacks

  • There are currently no refbacks.


Creative Commons License
FLYWHEEL: JURNAL TEKNIK MESIN UNTIRTA is licensed under a Creative Commons Attribution 4.0 International License.