CORRECTIVE MAINTENANCE ON DEFLECTOR ROLL USING BREAKDOWN METHOD AT PT PELAT TIMAH NUSANTARA (LATINUSA), TBK.

Ryvaldi Tyas Wijaya, Hamdan Akbar Notonegoro, Dwinanto Dwinanto, Dhimas Satria, Erny Listijorini, Miftahul Jannah

Abstract


Deflector Roll plays an essential role in the manufacturing of tinplate at PT Pelat Timah Nusantara (Latinusa), Tbk. This research examines the corrective maintenance procedure by employing the breakdown method to pinpoint repeated problems and their resolutions. The primary issues noted include degraded bearings, soiled surfaces, and uneven rollers, all of which hinder production continuity. The maintenance procedures consist of disassembling, examining, replacing, cleaning, balancing, and reassembling. Analyzing 55 documented damage occurrences from 2015 to 2024 reveals that surface-related problems were predominant, with 9 instances (16.36%) of glossy smooth surfaces, followed closely by surface buckling (14.55%) and dirty surfaces (14.55%). The outcome indicates that organized maintenance enhances efficiency and extends roll lifespan

Keywords


Breakdown method, Corrective Maintenance, Deflector Roll

Full Text:

PDF

References


Alfalah, W., Sulistyo, E., & Ikhsan, R. (2017). Pengaruh Pemeliharaan Overhaul Turbocharger Terhadap Kinerja Mesin Unit VII PLTD Ampera. Jurnal Power Plant, 5(1), 29–39.

Ardian, M. P. (2015). Perawatan dan Perbaikan Mesin. Yogyakarta: Universitas Negeri Yogyakarta.

Badan Riset dan Inovasi Nasional (BRIN). (2023). Tentang Kerusakan dan Umur Material untuk Keselamatan Industri: Ini Penjelasan Peneliti BRIN. Retrieved February 28, 2025, from https://brin.go.id/news/110433/tentang-kerusakan-dan-umur-material-untuk-keselamatan-industri-ini-penjelasan-peneliti-brin.

Bakri, K. (2016). Usulan Waktu Preventive Maintenance Untuk Menurunkan Downtime dan Biaya Perawatan Mesin Three Roll Bending dengan Reliability Block Diagram di PT Asyatek Indonesia. (Undergraduate thesis). Universitas Sultan Ageng Tirtayasa.

Haryanto, A., Azizi, A. Z., & Suharto, A. (2021). Pengaruh Proses Pengerolan terhadap Struktur Mikro dan Kekerasan Kawat Baja Galvanis. Jurnal Material dan Manufaktur, 5(1), 11–18.

Hendrasnoto, A., Kulsum, M. T., & Saeful, A. I. (2013). Usulan Perbaikan Maintenance Untuk Menurunkan Downtime Pada Mesin Pay–Off Reel Dengan Pendekatan Lean Maintenance di PT XYZ. Jurnal Teknik Industri Untirta, (1).

Iqbal, M., & Sholihah, G. (2016). Pengaruh Anggaran Biaya Pemeliharaan Aset Tetap terhadap Realisasi Biaya Pemeliharaan Aset Tetap. Jurnal Ilmiah Akuntansi, 7(2), 27–43.

Kennedy, R., & Patterson, R. (2002). Managing Maintenance Error: A Practical Guide. Hampshire: Ashgate Publishing.

Mobley, R. K. (2002). An Introduction to Predictive Maintenance (2nd ed.). Boston: Butterworth-Heinemann.

Moubray, J. (1997). Reliability-Centered Maintenance (2nd ed.). New York: Industrial Press Inc.

Nacnul, A. (2013). Sistem Perawatan Terpadu (Integrated Maintenance System) (1st ed.). Yogyakarta: Graha Ilmu.

Rohim, M., & Yunus. (2015). Rancang Bangun Mesin Pengerol Plat Bergelombang. Jurnal Riset Mesin (JRM), 2(2), 52–56.

Smith, R., & Hawkins, B. (2004). Lean Maintenance: Reduce Costs, Improve Quality, and Increase Market Share. Burlington: Elsevier.

Sodikin, I. (2010). Analisa Penentuan Waktu Perawatan dan Jumlah Persediaan Suku Cadang Rantai Garu yang Optimal. Jurnal Teknologi, 3(1), 44–52.

Wang, Y. (2014). A Corrective Maintenance Scheme for Engineering Equipment. Engineering Failure Analysis, 36, 269–283.




DOI: http://dx.doi.org/10.62870/timer.v3i01.34116

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Ryvaldi Tyas Wijaya, Hamdan Akbar Notonegoro, Dwinanto Dwinanto, Erny Listijorini

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

This work is licensed under Creative Commons Attribution 4.0 International

BRI303

BRI303

BRI303

BRI303

BRI303

BRI303

BRI303

BRI303

BRI303