ANALYSIS OF RESISTANCE ON FISHING VESSELS ON FISHERIES PORT, KARANGANTU SERANG
Abstract
Karangantu Port, located in Banten Province, plays a strategic role in supporting capture fisheries activities. However, fishing vessels operating in this port often face hydrodynamic resistance issues that affect operational efficiency. This study aims to analyze the influence of vessel speed and draft on the total resistance experienced by fishing boats. A 3D hull model was developed using SolidWorks and simulated using Maxsurf. Speed variations ranged from 5 to 12 knots, with four draft levels tested: 0.5 m, 0.7 m, 0.9 m, and 1.1 m. The results show that total resistance increases significantly with speed, particularly due to the dominance of wave-making resistance at speeds above 8 knots. Deeper drafts also lead to higher frictional resistance, caused by the increased wetted surface area. The optimal operational speed for maintaining fuel efficiency is in the range of 6 to 9 knots, with a balanced draft setting to ensure vessel stability without excessive resistance. These findings are expected to contribute to more efficient design and operation of fishing vessels at Karangantu Port.
Keywords
Full Text:
PDFReferences
Joseph, A., & Dalaklis, D. (2021). The International Convention For The Safety Of Life At Sea: Highlighting Interrelations Of Measures Towards Effective Risk Mitigation. Journal Of International Maritime Safety, Environmental Affairs, And Shipping, 5(1), 1-11.
Jmanengkey, R. C., Masengi, K. W., Manu, L., Pamikiran, R. D. C., Luasunaung, A., & Dien, H. V. (2023). Studi Tentang Desain Kapal Perikanan Pantai. JURNAL ILMU DAN TEKNOLOGI PERIKANAN TANGKAP, 8(1), 31 38.
Pangestu, G. B., Chrismianto, D., & Rindo, G. (2021). Analisa Pengaruh Penambahan Integrated Stern Wedge-Flap Terhadap Hambatan Kapal Dengan Metode CFD. Jurnal Teknik Perkapalan, 9(2), 199-205.
Ricinsi, F. P. R., Musriyadi, T. B., & Baidowi, A. (2021). Analisa Hambatan dan Efek Diving pada Kapal Monohull Pelat Datar dan Kapal Konvensional (Streamline). Jurnal Teknik ITS, 9(2), G49-G54.
Adi, F. T., & Suhadi, P. (2020). Komparasi Perh Itungan Draft Survey Antara Metode Konvensional Dengan Metode Microsoft Excel Dalam Menghitung Berat Muatan Pada Kapal. Jurnal Jalasena, 2(1), 16-27.
Ajiij, I. M., And D. Supriyatna. "Penerapan Hukum Archimedes Pada Kapal Laut (Mekanika Fluida)." Kohesi: Jurnal Sains Dan Teknologi 3.2 (2024): 31-40.
Awwalin, R., Munazid, A., Suwasono, B., & Poundra, G. (2019). Teori Dan Panduan Praktis Hidrodinamika Kapal Hukum Archimedes. In: Hang Tuah University Press.
Budiman, Y., Romansyah, F., Rochim, M. N., Akmal, M. S., Solikin, M., & Yudianto, A. (2022). Perancangan Bodi Kapal Patroli Lepas Pantai: Analisis Numerik Hidrodinamika Bodi Deep V-Hull, Bulbous Hull, Dan Catamaran Melalui Simulasi Software Maxsurf. Prosiding Seminar Nasional Ilmu Teknik Dan Aplikasi Industri Fakultas Teknik Universitas Lampung.
Nurdin, H. S., & Rahmawati, A. (2021). Hull Form Characteristics Of Traditionally Fishing Vessel< 5 GT At Karangantu Archipelago Fishing Port. Jurnal Perikanan Dan Kelautan, 11(2), 175-181.
DOI: http://dx.doi.org/10.62870/timer.v3i01.34491
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Dedy Triawan Suprayogi, ST., M.Sc., Ph.D., C.Eng., IPM
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under Creative Commons Attribution 4.0 International
