Robust Quality Control Implementation for Nickel Pig Iron Using Median Absolute Deviation Estimators

Aditya Rahadian Fachrur, Chyntia Devi Octaviany, Wiwien Suzanti, Midia Rahma, Mariana Feronica Damanik, Ferdian Bangkit Wijaya

Abstract


Nickel Pig Iron (NPI) is one of the main products of Indonesia's nickel-based industry, which is still expanding. Reducing production costs and guaranteeing product quality depends on maintaining a constant nickel content. The Median Absolute Deviation (MAD) estimator, which is resistant to outliers and non-normal distributions, is used in this study's control charts and process capability analysis. After 15 days of production, data was gathered and examined using capability indices and control charts based on MAD. According to the results, the process mean is not statistically in control since many points exceed the control borders, even while process variation stays within the control limits. Acceptable process precision was indicated by the process capability index CpMAD being above 1. However, the CpkMAD value below 1 suggests that the mean process output does not consistently meet the target specifications. These findings highlight the need for further investigation and process improvement to enhance quality consistency in NPI production.

Keywords


Median Absolute Deviation; Quality Control; Control Chart; Process Capability; Nickel Pig Iron

Full Text:

PDF

References


F. Musthofa, S. Watsiqoh, N. F. B. Angin, A. E. Sukamto, dan A. R. Fachrur, “Perbandingan kinerja peta kendali np klasik dan np bayes produk roti di UMKM BenRoti Snack Box,” J. Syst. Eng. Manag., vol. 2, no. 1, hal. 52, 2023, doi: 10.36055/joseam.v2i1.19323.

D. C. Montgomery, Introduction to Statistical Quality Control, 7 ed. John Wiley&Sons, 2013.

D. Sumarsono dan W. Widiasih, “Pengendalian Kualitas Untuk Mengurangi Jumlah Cacat Produk Dengan Pendekatan Peta Kendali P Serta Usulan Perbaikan ( Studi Kasus Di Pt. Barata Indonesia (Persero) ),” I Tabaos, vol. 4, no. 1, hal. 1–16, 2024, doi: 10.30598/i-tabaos.2024.4.1.1-16.

T. J. Arciszewski, “A Review of Control Charts and Exploring Their Utility for Regional Environmental Monitoring Programs,” Environ. - MDPI, vol. 10, no. 5, 2023, doi: 10.3390/environments10050078.

D. C. Montgomery, “The 100th anniversary of the control chart,” J. Qual. Technol., vol. 56, no. 1, hal. 2–4, 2024, doi: 10.1080/00224065.2023.2282926.

D. E. Putri dan D. Rimantho, “Analisis Pengendalian Kualitas Menggunakan Kapabilitas Proses Produksi Kantong Semen,” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 8, no. 1, hal. 35–42, 2022, doi: 10.30656/intech.v8i1.4385.

J. K. Al Azis dan Y. Widharto, “Analisis Kapabilitas Proses Penyaluran Produk Biosolar Dengan Metode Statistical Process Control Pada Pt Pertamina Patra Niaga Integrated Terminal Semarang,” Ind. Eng. Online J., vol. 13, no. 4, 2024.

R. Rottie, “Pengendalian Kualitas Tahu Om Melky Dengan Pendekatan Statistical Process Control,” J. Ilm. Realt., vol. 15, no. 1, hal. 53–58, 2019, doi: 10.52159/realtech.v15i1.84.

M. Aslam, G. S. Rao, A. H. Al-Marshadi, L. Ahmad, dan C. H. Jun, “Control charts for monitoring process capability index using median absolute deviation for some popular distributions,” Processes, vol. 7, no. 5, 2019, doi: 10.3390/pr7050287.

M. Jabbari Nooghabi, “Process capability indices in normal distribution with the presence of outliers,” J. Appl. Stat., vol. 47, no. 13–15, hal. 2443–2478, Nov 2020, doi: 10.1080/02664763.2020.1796934.

C. N. P. G. Arachchige dan L. A. Prendergast, “Confidence intervals for median absolute deviations,” Commun. Stat. Simul. Comput., vol. 0, no. 0, hal. 1–10, 2024, doi: 10.1080/03610918.2024.2376198.

T. Pham-Gia dan T. L. Hung, “The mean and median absolute deviations,” Math. Comput. Model., vol. 34, no. 7–8, hal. 921–936, 2001, doi: 10.1016/S0895-7177(01)00109-1.

C. Leys, O. Klein, P. Bernard, dan L. Licata, “Detecting outliers: Do not use standard deviation around the mean, use absolute deviation around the median,” Exp. Soc. Psychol., hal. 4–6, 2013.

M. O. A. Abu-Shawiesh, “A simple robust control chart based on MAD,” J. Math. Stat., vol. 4, no. 2, hal. 102–107, 2008, doi: 10.3844/jmssp.2008.102.107.

M. Omar Ahmed Abu‐Shawiesh, “A control chart based on robust estimators for monitoring the process mean of a quality characteristic,” Int. J. Qual. Reliab. Manag., vol. 26, no. 5, hal. 480–496, Jan 2009, doi: 10.1108/02656710910956201.

B. Yazici dan S. Yolacan, “A comparison of various tests of normality,” J. Stat. Comput. Simul., vol. 77, no. 2, hal. 175–183, 2007, doi: 10.1080/10629360600678310.

A. R. Fachrur, S. A. Ihsani, N. F. B. Angin, dan M. H. U. Wibowo, “Pengendalian Kualitas Laptop PT . XYZ Menggunakan Peta Kendali Poisson Multivariat,” in Seminar Nasional Teknik Industri UGM, 2023, hal. 85–92.

M. O. A. Abu-Shawiesh, S. Banik, B. M. Golam Kibria, dan H. E. Akyüz, “A comparison of some modified confidence intervals based on robust scale estimators for process capability index,” Prod. Eng., vol. 14, no. 2, hal. 217–229, 2020, doi: 10.1007/s11740-019-00939-7.

A. R. Fachrur dan P. D. Karningsih, “Perbaikan Kualitas Wire Rod Steel Di PT . Krakatau Steel ( persero ) Tbk . Cilegon,” J. Stud. Manaj. Dan Bisnis, vol. 4, no. 1, hal. 210–223, 2017.

H. U. Pawar, S. K. Bagga, dan D. K. Dubey, “Investigation of production parameters for process capability analysis: A case study,” Mater. Today Proc., vol. 43, no. July, hal. 196–202, 2020, doi: 10.1016/j.matpr.2020.11.627.

R. Nurlisa dan I. Musfiroh, “Analisis Kapabilitas Proses Produk Farmasi X Dengan Pendekatan Six Sigma Di PT Y,” Maj. Farmasetika, vol. 7, no. 5, hal. 494–506, 2022, [Daring]. Tersedia pada: https://doi.org/10.24198/mfarmasetika.v7i4.40370.




DOI: http://dx.doi.org/10.62870/tjs.v1i1.31481

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Aditya Rahadian Fachrur, Chyntia Devi Octaviany, Wiwien Suzanti, Midia Rahma, Mariana Feronica Damanik, Ferdian Bangkit Wijaya

This work is licensed under Creative Commons Attribution 4.0 International

BRI303

BRI303

BRI303

BRI303

BRI303

BRI303

BRI303

BRI303

BRI303