Material Screw Testing ON Tail Rotor Drive Using 'D' Penetrant Testing Method

Susilawati Susilawati, Masri Bin Ardin, Rafi Anwar Syarif

Abstract


Non Destructive Testing is a method of inspection that used in aircraft maintenance. Penetrant test is one type of Non Destructive Test (NDT) which is applied to screw tail rotor drive material. The purpose of this study was to determine the presence of defects, cracks, or other discontinuities without damaging the object being tested or inspected. The design research of applying the penetrant test to screw tail rotor drive material containing ferrous (fe) used the 'D' method, which is by dipping the material into the penetrant liquid with a waiting time of 20 minutes, then cleaning it using water and an emulsifier and drying using an oven. Before the inspection is carried out, the material is sprayed with a developer with a waiting time of 10 minutes, then the material is checked for defects or not. The test results showed that there was no defect in the form of a crack, but found an indication that is included in the non-relevant indication, which is an indication of the shape or design of the material found in the screw section.


Keywords


Non destructive Test, PENETRANT Test, Tail Rotor Drive

Full Text:

PDF

References


The Welding Institute, CSWIP 3.1: Welding Inspector WIS5. United Kingdom: TWi Ltd, 2016.

X. Guirong, G. Xuesong, Q. Yuliang, and G. Yan, “Analysis and Innovation for Penetrant Testing for Airplane Parts,” Procedia Eng., vol. 99, pp. 1438–1442, 2015.

N. J. Shipway, T. J. Barden, P. Huthwaite, and M. J. S. Lowe, “Automated defect detection for Fluorescent Penetrant Inspection using Random Forest,” NDT E Int., vol. 101, pp. 113–123, 2019.

K. Daneshvar and B. Dogan, “Application of quantum dots as a fluorescent-penetrant for weld crack detection,” Mater. High Temp., vol. 27, no. 3, pp. 179–182, 2010.

C. C. Roshan, R. C, H. V. Ram, S. K.P, and J. Solomon, “Non-destructive testing by liquid penetrant testing and ultrasonic testing – A review,” Int. J. Adv. Res. Ideas Innov. Technol., vol. 5, no. 2, pp. 694–697, 2019.

M. J. Lovejoy, Penetrant Testing: A Practical Guide, 1st ed. London: Springer Netherlands, 1991.

P. J. Shull, Nondestructive Evaluation: Theory, Techniques, and Applications, 1st ed. Pennsylvania: CRC Taylor & Francis, 2002.

C. J. Hellier, Handbook of Nondestructive Evaluation, 1st ed. United States of America: The McGraw-Hill Companies, Inc., 2003.

R. X. L. Youwen, The penetration testing [M], 1st ed. Lv Deji: Mechanical Industry Publishing House, 2004.

International Atomic Energy Egency, Liquid Penetrant and Magnetic Particle Testing at Level 2, 1st ed. Vienna: Industrial Applications and Chemistry Section, 2000.

ASTM E165 / E165M - 18, Standard Practice for Liquid Penetrant Testing for General Industry. United States of America: ASTM, 2012.

ASTM E1417, Standard Practice for Liquid Penetrant Testing. United States of America: ASTM.




DOI: http://dx.doi.org/10.30870/vanos.v6i1.10939

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.