Maintenance of Dry Organic Fertilizer Mixer Machine of Tobacco Agriculture

Susilawati Susilawati, Masri Bin Ardin, Annisa Oktaviani

Abstract


The purpose of this study was to make a preventive maintenance plan for the dry organic fertilizer mixing machine for tobacco farming with the Inspection, Small repair, Medium repair, Overhaul which is called ISMO method. The steps of the study carried out were data collection by observation and literature studies, then component identification, maintenance schedules, maintenance procedure plans and expert validation. The results of the study are the preventive maintenance schedule for the mixer machine consisting of a monthly schedule and an annual schedule using the ISMO method. The total time required for inspection maintenance activities is 240 minutes, small repair is 210 minutes, and medium repair is 20 minutes. Based on the validation results, the maintenance schedule has been feasible to be applied to a dry organic fertilizer mixer machine for tobacco farming and total maintenance time used along a year are inspection 240 minutes, small repair 214 minutes and medium repair as 20 minutes.

 


Keywords


ISMO, Preventive Maintenance, Organic Fertilizer, Mixer Machine

Full Text:

PDF

References


Y. F. Pratama, E. Ariyanto, and S. A. Karimah, “Prototype of automation of organic fertilizer manufacturing systems based on internet of things,” 2019 7th Int. Conf. Inf. Commun. Technol. ICoICT 2019, pp. 1–6, 2019, doi: 10.1109/ICoICT.2019.8835299.

W. Lawong, P. Hwangdee, S. Thumma, and C. Lawong, “Development of two pellet die organic fertilizer compression machine,” Procedia Eng., vol. 8, pp. 266–269, 2011, doi: 10.1016/j.proeng.2011.03.049.

I. A. Daniyan, A. M. Omokhuale, A. A. Aderoba, O. M. Ikumapayi, and B. A. Adaramola, “Development and performance evaluation of organic fertilizer machinery,” Cogent Eng., vol. 4, no. 1, 2017, doi: 10.1080/23311916.2017.1364044.

M. Fernández-Delgado, E. del Amo-Mateos, S. Lucas, M. T. García-Cubero, and M. Coca, “Liquid fertilizer production from organic waste by conventional and microwave-assisted extraction technologies: Techno-economic and environmental assessment,” Sci. Total Environ., vol. 806, 2022, doi: 10.1016/j.scitotenv.2021.150904.

H. Alfares, A. Mohammed, and M. Ghaleb, “Two-machine scheduling with aging effects and variable maintenance activities,” Comput. Ind. Eng., vol. 160, no. August 2019, p. 107586, 2021, doi: 10.1016/j.cie.2021.107586.

R. K. Mobley, AN INTRODUCTION TO PREDICTIVE MAINTENANCE, Second Edi. US: Elsevier, 2002.

A. S. Corder, Maintenance Management Techniques. UAS: McGraw-Hill Inc, 1976.

A. Efendi, F. Alif, and A. Oktaviani, “Preventive Maintenance pada Sistem Kelistrikan Mobil Listrik Sula Evolution,” in The 12th Industrial Research Workshop and National Seminar (IRWNS), 2021, pp. 4–5, doi: https://doi.org/10.35313/irwns.v12i0.

H. Yang, W. Li, and B. Wang, “Joint optimization of preventive maintenance and production scheduling for multi-state production systems based on reinforcement learning,” Reliab. Eng. Syst. Saf., vol. 214, no. April, p. 107713, 2021, doi: 10.1016/j.ress.2021.107713.

E. H. P. Garg, Industrial Maintenance. New Delhi: SChand Publications, 1976.

J. Rusama, “Developing a Car Maintenance Service Concept for Business Customers : A Case Study of Veho Autotalot Oy,” Laurea University, 2012.

M. Sharifi and S. Taghipour, “Optimal production and maintenance scheduling for a degrading multi-failure modes single-machine production environment,” Appl. Soft Comput., vol. 106, p. 107312, 2021, doi: 10.1016/j.asoc.2021.107312.

A. R. Fachrudin, “PENERAPAN SISTEM PERAWATAN METODE ISMO PADA TURBIN TIPE VERTICAL FRANCIS KAPASITAS 35 MW,” J. Tek. Mesin, vol. 7, no. 2, pp. 22–29, 2021.

Z. Zhang and Q. Tang, “Integrating flexible preventive maintenance activities into two-stage assembly flow shop scheduling with multiple assembly machines,” Comput. Ind. Eng., vol. 159, no. May, p. 107493, 2021, doi: 10.1016/j.cie.2021.107493.

Y. Liu, Q. Zhang, Z. Ouyang, and H. Z. Huang, “Integrated production planning and preventive maintenance scheduling for synchronized parallel machines,” Reliab. Eng. Syst. Saf., vol. 215, no. 2006, p. 107869, 2021, doi: 10.1016/j.ress.2021.107869.




DOI: http://dx.doi.org/10.30870/vanos.v6i2.12713

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.