.png)
.png)
Rice Snail Shell Siege Machine Design
Abstract
The rice field snail can be used as a processed food that can be consumed by humans because it contains protein in its meat. However, consuming rice field snails can produce waste field snail shells which are disturbing because they have an unpleasant odor if left alone. Therefore, the rice field snail shell waste is maximized to be used as poultry feed. To make it easier to make the poultry feed, this study aims to design a penepung machine to smooth the shells of rice field snails. Based on the design results using solidworks 2019 software, the design of the siege machine components consists of a driving motor with a power of 6 HP, a drive pulley with a diameter of 50.8 mm, a driven pulley with a diameter of 152.44 mm, v-bet type A with a length of 44 inches . So after testing, the design results obtained for rice field snail shells which have a capacity of 12 kg/hour with an efficiency of 42%. By using the cost of materials and manufacture of Rp. 4,034,500.
Keywords
Full Text:
PDFReferences
I. Z. Fitria, "Pemanfaatan Ekstrak Cangkang Keong Sawah (Pilla Ampullacea) Untuk Penjernih Air," Surabaya, 2020.
Q. A'yuni, A. Widiyanti, I. F. Ulfindrayani, Y. R. Prayogi, S. Arif and A. F. L. Ningsih, "Pemanfaatan Limbah Cangkang Kerang Sebagai Pakan Ternak Berkualitas Di Desa Tambak Cemandi Sidoarjo," Journal of Science and Social Development, vol. 2, no. 2, pp. 62-69, 2019.
"Designed Process Of Seed Flouring Machine By VDI 2221 Method," Jurnal Penelitian dan Pengkajian Sains Dan Teknologi, vol. 32, no. 2, pp. 55-66, 2022.
M. Setyowati and C. , "Kajian Limbah Cangkang Kerang Sebagai Alternatif Bahan Amelioran Di Lahan Gambut," Journal Agrotek Lestari, vol. 2, no. 1, pp. 59-64, 2016.
M. Hadiwidodo, M. N. Ainurrofiq, P. and W. Oktiawan, "Pengaruh Nano-bio Koagulan dari Cangkang Keong Sawah (Pilla ampullacea) untuk menurunkan COD, Kekeruhan, dan TSS Limbah Cair Industri Farmasi," Jurnal Presipitasi, vol. 6, no. 3, pp. 133-139, 2019.
Edrizal, D. Eka and G. S. L, "Pengaruh Cangkang Keong Sawah (Pila ampullacea) Terhadap Pembentukan Tulang Baru (Remodeling Tulang)," Heme, vol. II, no. 2, pp. 42-51, 2020.
D. Sriwahyuni, "Penggunaan Cangkang Keong Sawah (Pila Ampulacea) Sebagai Biokoagulan Pada Pengolahan Limbah Domestik (Grey Water)," UNIVERSITAS NEGERI AR-RANIRY, BANDA ACEH, 2020.
A. Hanafie, M. Fadhli and I. Syahruddin, "Rancang Bangun Mesin Pencacah Rumput Untuk Pakan Ternak," ILTEK: Jurnal Teknologi, vol. 11, no. 21, pp. 1484-1487, 2016.
M. A. Syahabuddin, T. Tiyasmihadi and F. Bisono, "Rancang Bangun Mesin Clamshell Crusher," PPNS, vol. 1, no. 1, pp. 205-211, 2018.
Zulnadi, Indovilandri and Irfandi, "Rancang Bangun Alat Mesin Hammer Mill untuk Pengolahan Jagung Pakan," Jurnal Teknologi Pertanian Andalas, pp. 35-43, 2016.
M. D. Pinem, D. Sinabutar, B. Panjaitan and S. Hikmah, "Teknologi Tepat Guna Mesin Penepung Limbah Opak untuk Peternak," Jurnal Pengabdian Masyarakat Indonesia (JPMI) , vol. 3, no. 1, pp. 95-99, 2023.
L. Fitriane, "Rancang Bangun Mesin Pengolah Cangkang Telur Menjadi Tepung Untuk Bahan Water Soluble Calcium," Institut Teknologi Sepuluh November, Surabaya, 2016.
E. Saefudin, Marsono and Wahyu, "Perancangan Mesin Penepung Rumput Laut Skala Laboratorium," Yogyakarta, 2016.
F. C. Nugraha and R. D. Faturohman, "Pemilihan dan Perancangan Ulang Mesin Penepung Jahe yang Telah dikeringkan," Bandung, 2022.
K. S. Hurst and L. Simarmata, Prinsip-prinsip Perancangan Teknik, 6 ed., Jakarta: Erlangga, 2006, p. 153.
R. L. Mott, Rines and D. Prabantini, Elemen-elemen mesin dalam perancangan mekanis : perancangan elemen mesin terpadu, 1 ed., Yogyakarta: Andi, 2009, p. 662.
E. A. Avallone, T. Baumeister and A. M. Sadegh, Mark's Standard Handbook for Mechanical Engineers, 11 ed., McGraw Hill Professional, 2006, p. 1800.
L. Rusdiyana, Suhariyanto, G. D. Winarto, S. Hadi and M. Mursid, "Desain dan analisa pisau penghancur bonggol jagung," Jurnal Energi dan Manufaktur, vol. 9, no. 1, pp. 49-53, 2016.
R. Khurmi and J. Gupta, Machine Design (S.I. UNITS), New Delhi: Eurasia Publishing House (PVT.) LTD, 2015.
H. Mahmudi, "Analisa Perhitungan Pulley dan V-Belt Pada Sistem Transmisi," Jurnal Mesin Nusantara, vol. 4, no. 1, pp. 40-46, 01 Juni 2021.
Muzahidin, P. Raharja and Zulianti, "Rancang Mesin Penepung Biji Sorgum," Politeknik Manufaktur Negeri Banka Belitung, Bangka Belitung, 2020.
I. Setiawan and Jumari, "Perencanaan Konstruksi Mesin Penggiling Dengan Sistem Roda Gigi," SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, vol. 1, no. 2, pp. 1-11, 2017.
L. R. Purba and S. J. Napitupulu, "Rancang Bangun Mesin Pembuat Tepung Singkong Kapasitas 50 Kg/Jam," Jurnal Teknologi Mesin UDA, vol. 3, no. 1, pp. 135-142, 2022.
Sularso and K. Suga, Dasar Perencanaan Dan Pemilihan Elemen Mesin, JAKARTA: Pradnya Paramita, 2004.
A. S. Putra and K. Kardiman, "Perhitungan Pulley Dan V-Belt Pada Perancangan Transmisi Mesin Pencacah Eceng Gondok Untuk Alternatif Pakan Ternak," Gorontalo Journal Of Infrastructure & Science Engineering, vol. 5, no. 1, pp. 14-20, 2022.
H. Pangalima, E. S. Antu and Y. Djamalu, "Rancang Bangun Mesin Penggiling Jagung Dua Fungsi Cara Manual Dan Mekanis," Jurnal Teknologi Pertanian Gorontalo (JTPG), vol. 1, no. 1, pp. 21-37, 2016.
A. Sutrisna, Syawaldi, Dedikarni and J. Raharjo, "Design Of Dry Leaves Shredder Machine Using," Journal Renewable Energy & Mechanics (REM), vol. 2, no. 2, pp. 66-80, 2019.
A. Widyanugraha, A. Santosa and D. T. Santosa, "Perancangan Mesin Penggiling Padi dan Penepung Sekam Padi Skala," Jurnal Teknik Mesin Politeknik Negeri Padang, vol. 13, no. 2, pp. 69-75, 2020.
G. Niemann, Elemen Mesin Jilid 1, ED. II: Desain dan Kalkulasi, 2 ed., Jakarta: Erlangga, 2018.
S. Ummah and . I. N. Sutantra, "Aplikasi Prinsip Ergonomi pada perancangan Alat Perajang Bahan Baku Keripik yang Multiguna," JURNAL TEKNIK ITS, vol. 7, no. 1, pp. 233-138, 2018.
DOI: http://dx.doi.org/10.30870/vanos.v8i1.18240
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 4.0 International License.