Development of Masking Learning Module for Vocational High School Automotive Body Engineering Expertise Competency

Rabiman Rabiman, Muhammad Ali Azhar

Abstract


The purpose of this research is to produce a learning module that is feasible for learning to carry out masking on unrepaired vehicle body parts. The data collection technique in this study is using a student response questionnaire using a Likert scale. This type of research is research and development (R&D) using the 4-D research model. The subjects of this research were XI TBR class students at SMK Kristen 5 Klaten, totaling 30 students. Data analysis using percentage techniques. The results showed that based on the results of the assessment by material experts, media experts, and trials to students, the learning module developed was feasible for use in learning. The assessment of the feasibility of learning modules by material experts received a score of 75% with feasible criteria, the assessment of media experts received a score of 75% with feasible criteria and the results of trials to students as users received a score of 86% with a very feasible category. Therefore, this module can be used in learning to carry out masking on unrepaired vehicle body parts for students of Light Vehicle Body Engineering.

Keywords


Body Parts, Development, Masking, Module

Full Text:

PDF

References


A. Ryandika, R. Rabiman, and S. Purnomo, “Pengembangan Modul Pembelajaran Mata Pelajaran Pengecatan Bodi Pada SMK Program Keahlian Teknik Bodi Otomotif,” Jurnal Pendidikan Vokasi Otomotif, vol. 6, no. 2, pp. 29–38, 2024, doi: 10.21831/jpvo.v6i2.70529.

R. Rabiman, A. B. Johan, N. A. Handoyono, and F. Fakhrul, “Android-based mobile learning: AC system in vocational education using four-D model,” AIP Conf Proc, vol. 3145, no. 1, 2024, doi: 10.1063/5.0214389.

N. Pratama and Setuju, “Hubungan Minat Belajar Kejuruan Dan Prestasi Belajar Praktik Pengelasan Dengan Minat Bekerja Di Industri Siswa Kelas XI Semester Genap Teknik Pengelasan SMK Negeri 1 Sedayu Bantul Yogyakartatahun Ajaran 2014/2015,” Jurnal Taman Vokasi, vol. 3, no. 2, pp. 1–8, 2015.

Sugihartono. Dkk, “Buku Psikologi Pendidikan.pdf,” 2007.

B. D. Kuntoro, R. Rabiman, and A. B. Johan, “Pengembangan Modul Pembelajaran Gambar Teknik Siswa Sekolah Menengah Kejuruan PIRI 1 Yogyakarta Tahun Ajaran 2019/2020,” Jurnal Vokasi Dewantara, vol. 2, no. 1, pp. 1–11, 2021.

R. Rabiman, F. Oksandi, and A. Khaharsyah, “Learning technology using flipping book in vocational education: ADDIE model,” AIP Conf Proc, vol. 3145, no. 1, 2024, doi: 10.1063/5.0214392.

S. Purnomo, E. Djufri, and A. Khaharsyah, “Pendidikan jarak jauh (PJJ) berbasis e-learning edmodo mahasiswa pendidikan vokasional teknik mesin,” Jurnal Taman Vokasi, vol. 8, no. 2, pp. 73–80, 2020.

D. Ratnawati, R. Martono, and R. Rabiman, “Pengembangan E-Modul Sistem Rem untuk Siswa Sekolah Menengah Kejuruan,” Jurnal Dinamika Vokasional Teknik Mesin, vol. 5, no. 1, pp. 20–26, 2020, doi: 10.21831/dinamika.v5i1.30987.

I. Ikhsan, R. Rabiman, A. B. Johan, and J. R. Duling, “Pengembangan Modul Pembelajaran Sistem Bahan Bakar EFI Toyota Avanza Di SMK Muhammadiyah Mlati,” Jurnal Pendidikan Vokasi Otomotif, vol. 5, no. 1, pp. 81–94, 2022, doi: https://doi.org/10.21831/jpvo.v5i1.57758.

Rabiman, “Memilih Metode Pembelajaran untuk Mata Pelajaran Produktif pada SMK Program Studi Keahlian Lokomotif,” in Seminar Nasional Pendidkan Teknik Otomotif "Tantangan dan Peluang Pendidikan Vokasi Kejuruan dalam Memasuki Masyarakat Ekonomi ASEAN (MEA), Purworejo: Fakultas Keguruan dan Ilmu Pendidikan Universitas Purworejo, 2015, pp. 46–54.

F. Demayanti and S. Soenarto, “Pengembangan video pembelajaran bumbu dan rempah pada mata pelajaranpengolahan makanan kontinental,” Jurnal Inovasi Teknologi Pendidikan, vol. 5, no. 1, pp. 91–102, 2018, doi: 10.21831/jitp.v5i1.14028.

A. Swaraj, K. Verma, A. Kaur, G. Singh, A. Kumar, and L. Melo de Sales, “Implementation of stacking based ARIMA model for prediction of Covid-19 cases in India,” J Biomed Inform, vol. 121, no. August, pp. 1–11, 2021, doi: 10.1016/j.jbi.2021.103887.

S. Purnomo and M. B. Triyono, “Efektifitas Technopreneurship Dengan Model Pembelajaran Cooperative Learning By Technopreneur For SMK Untuk Siswa Di SMK,” Taman Vokasi, vol. 6, no. 1, p. 120, 2018, doi: 10.30738/jtvok.v6i1.2972.

Nurul Audie, “Peran Media Pembelajaran Meningkatkan Hasil Belajar,” Posiding Seminar Nasional Pendidikan FKIP, vol. 2, no. 1, pp. 586–595, 2019.

A. Aurora and H. Effendi, “Pengaruh Penggunaan Media Pembelajaran E-learning terhadap Motivasi Belajar Mahasiswa di Universitas Negeri Padang,” JTEV (Jurnal Teknik Elektro dan Vokasional), vol. 5, no. 2, p. 11, 2019, doi: 10.24036/jtev.v5i2.105133.

Purwanto, A. Rahadi, and L. Suharto, pengembangan modul. Jakarta: PUTEKKOM Depdiknas, 2007.

Daryanto, Menyusun modul bahan ajar untuk persiapan guru dalam mengajar, 1st ed. Yogyakarta: Gava Media, 2013.

N. A. Handoyono and A. Mahmud, “Pengembangan Media Pembelajaran Berbasis Android pada Pembelajaran Electronic Fuel Injection,” INVOTEK: Jurnal Inovasi Vokasional dan Teknologi, vol. 20, no. 2, pp. 107–116, 2020, doi: 10.24036/invotek.v20i2.791.

N. Setuju, D. Ratnawati, A. Wijayanti, W. Widodo, and B. R. Setiadi, “ICT-based learning media development,” J Phys Conf Ser, vol. 1446, 2020, doi: 10.1088/1742-6596/1446/1/012038.

Nasution, Berbagai pendekatan dalam proses belajar dan mengajar, 16th ed. Jakarta: Bumi Aksara, 2013.

L. Lasmiyati and I. Harta, “Pengembangan Modul Pembelajaran untuk Meningkatkan Pemahaman Konsep dan Minat SMP,” PYTHAGORAS Jurnal Pendidikan Matematika, vol. 9, no. 2, pp. 161–174, 2014, doi: 10.21831/pg.v9i2.9077.

N. A. Handoyono and S. Hadi, “Pengembangan Modul Pembuatan Bodi Kendaraan Dari Fiberglass Untuk Mendukung Perkuliahan Cat Dan Bodi Kendaraan,” Taman Vokasi, vol. 6, no. 1, p. 36, 2018, doi: 10.30738/jtvok.v6i1.2818.

S. Purnomo, T. Pamungkas, A. B. Johan, and E. Djufri, “Implementation of Android Application-Based Learning Media on Motorcycle Electrical Maintenance Materials in Vocational High Schools,” VANOS Journal of Mechanical Engineering Education, vol. 8, no. 2, p. 172, 2023, doi: 10.30870/vanos.v8i2.22454.

A. Y. Utomo and D. Ratnawati, “Pengembangan Video Tutorial Dalam Pembelajaran Sistem Pengapian Di Smk,” Taman Vokasi, vol. 6, no. 1, p. 68, 2018, doi: 10.30738/jtvok.v6i1.2839.

R. Rabiman, P. Sudira, H. Sofyan, and M. Nurtanto, “Practical Learning Media in Subject Maintenance of Chassis and Power (MCP) Based Online: Simple Learning Using Videos on YouTube,” International Journal of Interactive Mobile Technologies, vol. 15, pp. 130–145, 2021, doi: https://doi.org/10.3991/ijim.v15i03.14943.

sugiyono, Metode Penelitian Pendidikan Pendekatan Kuantitatif, kualitatif, dan R&D. Bandung: Alfabeta, 2019.

E. Mulyatiningsih, Metode Penelitian Terapan Bidang Pendidikan. Bandung: Alfabeta, 2013.

S. Arikunto, Prosedur Penelitian Suatu Pendekatan Praktik. Jakarta: PT Rineka Cipta, 2013.

R. Rabiman, M. A. Ma’ruf, A. B. Johan, and S. Purnomo, “Developing E-Learning Modules of Common-Rail Technology,” in International Conference on Technology, Education and Science, A. Setiawan, D. Supriadi, K. H. Najib, T. Ardhian, N. A. Handoyono, I. Widyastuti, and L. Tiasari, Eds., Yogyakarta: Universitas Sarjanawiyata Tamansiswa, 2020, pp. 32–36.

D. Kurniawan and Ibnu Siswanto, “Developing Tutorial Video Chassis Maintenance for Automotive Students at SMK Negeri 1 Seyegan,” VANOS Journal of Mechanical Engineering Education, vol. 9, no. 1, pp. 78–88, 2024.

D. Sudibyo and D. Rahdiyanta, “Development of Product-Based E-modul of Manufacturing Helical Gears in Mechanical Engineering,” Am J Educ Res, vol. 9, no. 4, pp. 212–217, 2021, doi: 10.12691/education-9-4-9.




DOI: http://dx.doi.org/10.30870/vanos.v9i2.23212

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.