Creative Product Prototype of Natural Fiber Craft Tray in Rural Vocational Communities

Widodo Widodo, Arif Bintoro Johan, Fajar Dwi Yudanto

Abstract


In the digital era, the creative economy is increasingly developing through creative products that have become leading products in every country. one of them is the water hyacinth tray which is one of the superior products of the Kulon Progo community, Special Region of Yogyakarta. The purpose of the study is to apply mechanical engineering science, the frame of this tray will be tested for its feasibility and durability and students can participate in implementing creative product applications that are beneficial to the general public. The research method uses action research with sample data including materials, material density values and material volume lifted by the tray. Testing of the tray frame using Finite Element Analysis (FEA/FEM) to determine the maximum load that can be carried by the tray. The tray frame is loaded to obtain stress propagation, deformation, tensile safety factor and cycle life. The working loads given include 2.9 kg, 3.4 kg and 4 kg while the maximum load in the experiment is 5 kg and 10 kg. The results of the research on the concept of creativity become a basic concept in the development of science and skills. In tray design, steel is the best material for making trays when tested with software.


Keywords


Creative, Product Testing, Finite Element Analysis

Full Text:

PDF

References


S. Siswati, “Pengembangan Soft Skills Dalam Kurikulum Untuk Menghadapi Revolusi Industri 4.0,” Edukasi J. Pendidik., vol. 17, no. 2, p. 264, 2019, doi: 10.31571/edukasi.v17i2.1240.

J. O. Ong and M. Mahazan, “Strategi Pengelolaan SDM dalam Peningkatan Kinerja Perusahaan Berkelanjutan di Era Industri 4.0,” Bus. Econ. Commun. Soc. Sci. J., vol. 2, no. 1, 2020, doi: 10.21512/becossjournal.v2i1.6252.

W. O. Z. Muizu and N. Effendi, “Penguatan Sdm Industri Kreatif Melalui Peningkatan Kompetensi Dan Knowledge Management,” PEKBIS ( J. Pendidik. Ekon. Dan Bisnis ), vol. 7, no. 3, 2015.

S. Yi, M. Zhang, Z. Huo, and Y. Mao, “The Configuration Path of the New Rural Collective Economy to Promote the Common Prosperity of Farmers: Based on Qualitative Comparative Analysis Method and the Rural Cases in Zhejiang, China,” Systems, vol. 12, no. 7, 2024, doi: 10.3390/systems12070256.

S. Sugianto, U. Vidriza, and I. A. Juliannisa, “Factors Causing Unemployment and Strategies for Handling Unemployment Problems in Cibadak District, Lebak Regency, Banten,” J. Econ. Financ. Manag. Stud., vol. 05, no. 11, pp. 3172–3181, 2022, doi: 10.47191/jefms/v5-i11-07.

P. A. Wijaya, J. Suprihanto, and B. Riyono, “Analisis Faktor-Faktor Penyebab Terjadinya Pengangguran dan Urbanisasi Pemuda di Desa Tamansari Kecamatan Karangmoncol Kabupaten Purbalingga Provinsi Jawa Tengah,” J. Pendidik. Ekon. Undiksha, vol. 12, no. 1, p. 117, 2020, doi: 10.23887/jjpe.v12i1.24503.

S. Nurbayan, A. Muliansyah, and N. Nurnazmi, “Kontribusi Kewirausahaan Dalam Mengurangi Pengangguran Di Desa Sumi Kecamatan Lambu Kabupaten Bima,” Edu Sociata ( J. Pendidik. Sosiol. ), vol. 4, no. 2, pp. 23–33, 2021, doi: 10.33627/es.v4i2.654.

UNCTAD, “Prospek Ekonomi Kreatif 2024,” 2024.

KEMENTERIAN PARIWISATA DAN EKONOMI KREATIF/BADAN PARIWISATA DAN EKONOMI KREATIF, “Menparekraf Sampaikan Lanskap Ekonomi Digital Indonesia dalam IAF 2024,” 2024.

Putu Sudira, Yoga Sahria, Pardjono Pardjono, Septiono Eko Bawono, and Widodo Widodo, “The Role of TVET In Stimulating Creative Economics Growth and Tourism Villages: Case Study In Segajih Hargotirto,” Proceeding Int. Glob. Tour. Sci. Vocat. Educ., vol. 1, no. 1, pp. 120–135, 2024, doi: 10.62951/icgtsave.v1i1.12.

A. BADAWI and L. NUGROHO, “Keberlangsungan Usaha Melalui Peningkatan Kualitas SDM Untuk Menciptakan Prilaku Inovatif Dalam Pengembangan Produk Pada UMKM Kelurahan Meruya Utara,” Akunt. dan Hum. J. Pengabdi. Masy., vol. 1, no. 2, pp. 140–144, 2022, doi: 10.38142/ahjpm.v1i2.348.

T. Rapini, N. Kristiyana, A. Santoso, and F. Setyawan, “Strategi pengembangan produk jipang berbasiskan pelatihan manajemen usaha dan pemasaran yang kreatif,” Masy. Berdaya dan Inov., vol. 1, no. 1, pp. 12–18, 2020, doi: 10.33292/mayadani.v1i1.7.

M. Roman, I. Kudinova, V. Samsonova, and N. Kawęcki, “Innovative Development of Rural Green Tourism in Ukraine,” Tour. Hosp., vol. 5, no. 3, pp. 537–558, 2024, doi: 10.3390/tourhosp5030033.

A. R. Bimantara, W. Hidayat, and M. S. W. Suliswanto, “Strategi Pengembangan Ekonomi Kreatif Di Kota Malang,” J. Ilmu Ekon. JIE, vol. 4, no. 1, pp. 1–13, 2021, doi: 10.22219/jie.v4i1.9189.

W. D. Anjaningrum and A. P. Sidi, “Pengaruh Orientasi Pasar, Inovasi Dan Kreativitas Produk Terhadap Kinerja Industri Kreatif Untuk Mencapai Keunggulan Bersaing,” J. Ilm. Bisnis dan Ekon. Asia, vol. 12, no. 2, pp. 30–47, 2018, doi: 10.32812/jibeka.v12i2.22.

N. Naninsih, S. Alam, J. Triwani, S. Tinggi Ilmu Ekonomi Amkop Makassar, and N. Naninsih STIE AMKOP Makassar, “Pengolahan Eceng Gondok Menjadi Handicraft Di Yapem Kecamatan Manggala Makassar,” 2020.

I. Daniarsari and N. Hidajati, “THE INFLUENCE OF THE EXTRACTION TEMPERATURE ON THE RENDEMENT AND PECTIN METHOXYL CONTENTS OF WATERHYACINTH (Eichornia crassipes (Mart) Solms),” Indones. J. Chem., vol. 5, no. 3, 2010, doi: 10.22146/ijc.21796.

F. S. Tuzzahrok and R. Murniningsih, “Pengaruh Motivasi dan Kreativitas dalam Membentuk Jiwa Kewirausahaan terhadap Womenpreneur,” J. Unimma, no. 2013, pp. 765–769, 2021.

N. Karundeng, J. A. F. Kalangi, and O. F. C. Walangitan, “Pengaruh Kualitas Produk Terhadap Minat Beli Konsumen Pada Home Industri Pia Deisy Desa Kapitu Kecamatan Amurang Barat,” J. Adm. Bisnis, vol. 8, no. 2, p. 83, 2019, doi: 10.35797/jab.8.2.2019.23566.83-90.

M. A. Dr. Muhammad Yaumi, M.Hum., M.A. &Dr. Muljono Damopolii, ACTION RESEARCH: Teori, Model, dan Aplikasi, 1st ed. Jakarta: K E N C A N A PRENADAMEDIA GROUP, 2014.

M. B. dan A. M. H. Miles, Qualitative Data Analysis: A Sourcebook of New Method. Jakarta: UI-PRESS, 1992.

D. Aufana, M. Kabib, and T. Hidayat, “Perancangan Dan Simulasi Tegangan Frame Mesin Pengisian Curah Tembakau,” J. Crankshaft, vol. 2, no. 2, pp. 9–16, 2019, doi: 10.24176/crankshaft.v2i2.3832.

F. Lubis, R. Pane, S. Lubis, M. A. Siregar, and B. S. Kusuma, “Analisa Kekuatan Bearing Pada Prototype Belt Conveyor,” J. MESIL (Mesin Elektro Sipil), vol. 2, no. 2, pp. 51–57, 2021, doi: 10.53695/jm.v2i2.584.

I. R. Rahmat, “Analisis Beban pada Hook Pembalik Produk AEET dengan Software Solidwork 2018,” Prima, vol. 17, no. 1, pp. 10–18, 2020.

S. Luthfianto and Siswiyanti, “Pengujian Ergonomi dalam Perancangan Desain Produk,” Pros. Semin. Nas. Teknoin 2008 Bid. Tek. Ind., pp. 159–164, 2008, doi: 10.1108/00214660480001155.

Masri Bin Ardin & Aditya Nugraha, “Journal of Mechanical Engineering: Editorial,” Stroj. Vestnik/Journal Mech. Eng., vol. 55, no. 1, p. 3, 2009.

L. Noviani, “Pengaruh Inovasi Produk, Kreativitas Produk, dan Kualitas Produk terhadap Keunggulan Bersaing (Studi Kasus pada Kerajinan Tikar Eceng Gondok ”Liar”),” J. Manaj. Danbisnis, vol. 2, no. 1, pp. 2076–2086, 2020.

Israwati, Hermansyah, T. Irawan, Fajrig Arsyelan, and Avid Opel Alexander, “Penerapan Strategi Pemasaran, Inovasi Produk Kreatif Dan Orientasi Pasar Untuk Meningkatkan Kinerja Pemasaran Umkm Tekat Tiga Dara,” J. Pengabdi. Ibnu Sina, vol. 2, no. 1, pp. 72–76, 2023, doi: 10.36352/j-pis.v2i1.510.

P. S. Widodo, Moch Bruri Triyono, TVET dan Industri Kreatif Pedesaan, 1st ed. Yogyakarta: Kepel Press, 2024.

Fajrizal, T. Taslim, Susi Handayani, and Syahril, “Pelatihan Pembuatan Website Pada Siswa Smk Migas Inovasi Riau Untuk Meningkatkan Pengetahuan Dan Kompetensi Siswa,” J-COSCIS J. Comput. Sci. Community Serv., vol. 3, no. 2, pp. 173–180, 2023, doi: 10.31849/jcoscis.v3i2.13028.

R. J. Paywala and D. Wulandari, “Pembelajaran Seumur Hidup di Abad 21 Untuk Menghadapi Era Disrupsi,” EKSPOSE J. Penelit. Huk. dan Pendidik., vol. 20, no. 2, 2021.

A. B. Saputro, A. E., Widodo, W., & Johan, “The Role of School Principal Management in Talent Interest Mapping: A Case Study of Human Resource Vocationalization at Automotive Vocational School Kulon Progo,” VANOS J. Mech. Eng. Educ., vol. 9, no. 1, pp. 57–66, 2024, doi: http://dx.doi.org/10.30870/vanos.v9i1.

A. B. Johan, A. F. Amalia, and A. Sudrajad, “Identification of Creative Economy Empowerment Activities for the Vocational Village Community of Hargotirto Kulon Progo,” Int. Semin. Commem. 100Th Anniv. Tamansiswa ǀ, vol. 18, no. February, pp. 485–489, 2022.

Nurfaidatulhasanah, “PENDIDIKAN SEUMUR HIDUP – nurfaidatulhasanah,” Cendekia, vol. 15, no. Iv, pp. 1–5, 2016, doi: 10.30957/cendekia.v15i2.722.

Ahmad Noviansah, “327208216,” OBJEK ASSESMENT, PENGETAHUAN, SIKAP, dan KETERAMPILAN, pp. 136–149, 2020.

T. Hidayat and Z. M. Nawawi, “Strategi Menumbuhkan Jiwa Kreatif dan Inovatif dalam Kewirausahaan,” Action Res. Lit., vol. 6, no. 1, 2022, doi: 10.46799/arl.v6i1.100.

M. Fathrezza Imani, M. Khoirul Fikri, and Almas Filzah, “PENGARUH KREATIF, INOVASI DAN STRATEGI PEMASARAN TERHADAP PENINGKATAN DAYA BELI KONSUMEN,” J. Ilmu Manajemen, Ekon. dan Kewirausahaan, vol. 2, no. 1, 2022, doi: 10.55606/jimek.v2i1.160.

W. Widodo, M. B. Triyono, P. Sudira, and F. Mutohhari, “Building Sustainable Creative Economy in Society through the Mediation Role of Innovation Behavior,” Sustain., vol. 15, no. 14, pp. 1–14, 2023, doi: 10.3390/su151410860.




DOI: http://dx.doi.org/10.30870/vanos.v9i2.27806

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.