Innovation of Aluminum Waste Fuel Stove

R Dwi Pudji Susilo, Mohamad Abror, Muhamad Fitri, M. Azizi, Dafit Feriyanto, Darwin Sebayang

Abstract


Aluminum waste is a challenging material to manage due to its high production rate from households and industries. This study aims to repurpose aluminum waste into hydrogen gas, which can serve as an alternative fuel for gas stoves. Direct disposal of aluminum waste can lead to environmental damage; hence, this project focuses on developing a system that dissolves aluminum using sodium hydroxide (NaOH) to produce hydrogen gas in a tube reactor. This hydrogen is then used as stove fuel. The comparison between aluminum-fueled hydrogen and conventional fuels, such as Pertalite and LPG, suggests that aluminum waste has potential as a cost-effective fuel source. For instance, one liter of Pertalite at Rp. 10,000 powers a motorbike for approximately 30 km, translating to Rp. 1,428 for a similar distance with aluminum-derived fuel. A 3 kg LPG cylinder costs around Rp. 24,000 and provides 10 hours of fuel, whereas hydrogen produced from aluminum can be cheaper if sourced from waste. Additionally, this design incorporates a refillable reactor that sustains hydrogen supply during combustion, ensuring consistent stove operation. The system is portable, safe, and offers high mobility, making it practical for various applications. This approach not only reduces aluminum waste but also presents an affordable alternative fuel solution, enhancing environmental sustainability.


Keywords


Aluminum Waste Management, Hydrogen Production, Alternative Fuel, Portable Hydrogen Reactor, Renewable Energi

Full Text:

PDF

References


N. A. Sasongko et al., Teknologi Energi Fosil. Bogor: Unhan RI press, 2023.

P. Siagian et al., Energi Baru Terbarukan Sebagai Energi Alternatif. 2023.

R. R. Al Hakim, “Model Energi Indonesia, Tinjauan Potensi Energi Terbarukan untuk Ketahanan Energi di Indonesia: Sebuah Ulasan,” ANDASIH J. Pengabdi. Kpd. Masy., vol. 1, no. 1, 2020, doi: 10.57084/andasih.v1i1.374.

Juliza Hidayati and Jeffrey Panama, “Tinjauan Permintaan Gas Global dan Distribusi LPG di Indonesia: Studi Pustaka,” Talent. Conf. Ser. Energy Eng., vol. 2, no. 3, 2019, doi: 10.32734/ee.v2i3.757.

I. M. Setiabudi, G. Kartikasari, and W. Kusumaningrum, “Membangun Ketahanan Energi & Komitmen Global Melalui Formulasi Standar Energi Baru,” STANDAR Better Stand. Better Living, vol. 3, no. 1, pp. 13–17, 2024.

A. Falathi and A. Adiwardhana, “Laporan Kinerja Kementrian ESDM 2021,” 2021.

S. Ainurrohmah and S. Sudarti, “Analisis Perubahan Iklim dan Global Warming yang Terjadi sebagai Fase Kritis,” J. Phi J. Pendidik. Fis. dan Fis. Terap., vol. 3, no. 3, p. 1, 2022, doi: 10.22373/p-jpft.v3i3.13359.

C. Luo and D. Wu, “Environment and economic risk: An analysis of carbon emission market and portfolio management,” Environ. Res., vol. 149, pp. 297–301, 2016, doi: https://doi.org/10.1016/j.envres.2016.02.007.

PP No. 79, “PP No. 79 Thn 2014.pdf.” pp. 1–36, 2014.

A. E. Setyono and B. F. T. Kiono, “Dari Energi Fosil Menuju Energi Terbarukan: Potret Kondisi Minyak dan Gas Bumi Indonesia Tahun 2020 – 2050,” J. Energi Baru dan Terbarukan, vol. 2, no. 3, pp. 154–162, 2021, doi: 10.14710/jebt.2021.11157.

L. Hakim and I. Marsalin, “PEMANFAATAN LIMBAH ALUMINIUM FOIL UNTUK PRODUKSI GAS HIDROGEN MENGGUNAKAN KATALIS NATRIUM HIDROKSIDA (NaOH),” J. Teknol. Kim. Unimal, vol. 6, no. 1, p. 68, 2018, doi: 10.29103/jtku.v6i1.470.

W. P. H. Siregar, M. Fawaid, and D. H. Abizar, “Pengaruh Penggunaan Reflektor Dan Pendingin Pasif Untuk Mengoptimalkan Daya Keluaran Pada Modul Surya,” J. Sains dan Teknol., vol. 21, no. 2, pp. 52–58, 2022.

F. Ramayanti, R. Junaidi, and I. Purnamasari, “PRODUKSI GAS HIDROGEN MENGGUNAKAN ALUMINIUM DARI LIMBAH KALENG MINUMAN DENGAN KATALIS NATRIUM HIDROKSIDA ( NaOH ),” vol. 5, no. September, pp. 54–62, 2024.

S. Wahyuni, L. Hakim, and F. Hasfita, “Pemanfaatan Limbah Kaleng Minuman Aluminium sebagai Penghasil Gas Hidrogen menggunakan Katalis Natrium Hidroksida ( NaOH ),” J. Teknol. Kim. Unimal, vol. 2, no. November, pp. 31–42, 2017.

Muthaharussayidun, S. Anis, and W. Aryadi, “Uji Produksi Gas Hidrogen Melalui Elektrolisis Plasma Air Laut Dengan Katalis Koh Dan Zat Aditif Etanol,” J. Inov. Mesin, vol. 1, no. 1, pp. 14–21, 2019, doi: 10.15294/jim.v1i1.40222.

S. Van den Eynde et al., “Forecasting global aluminium flows to demonstrate the need for improved sorting and recycling methods,” Waste Manag., vol. 137, pp. 231–240, 2022, doi: https://doi.org/10.1016/j.wasman.2021.11.019.

P. G and B. W, Engineering Design; A systematic Approach. 1988.

Kahar, “DESAIN REAKTOR ALUMINIUM FOIL GAS HIDROGEN SEBAGAI SUMBER ENERGI ALTERNATIF,” J. Pertan. terpadu, 2016.

A. Pratama, B. Basyirun, Y. W. Atmojo, G. W. Ramadhan, and A. R. Hidayat, “Rancang Bangun Kompor (Burner) Berbahan Bakar Oli Bekas,” Mek. Maj. Ilm. Mek., vol. 19, no. 2, p. 95, 2020, doi: 10.20961/mekanika.v19i2.42378.

E. A. P. Utama and E. Komara, “Faktor yang Mempengaruhi Minat Pembelian Produk Ramah Lingkungan (Studi Kasus pada Gen Z di Jabodetabek),” J. Ekon. Manaj. dan Perbank. (Journal Econ. Manag. Banking), vol. 7, no. 3, p. 90, 2022, doi: 10.35384/jemp.v7i3.259.

W. Widyastuti, E. Suparti, and A. E. Tontowi, “Pemetaan Efektivitas dan Efisiensi Metode Desain Produk: Telaah Pustaka,” Tekinfo J. Ilm. Tek. Ind. dan Inf., vol. 12, no. 2, pp. 79–96, 2024, doi: 10.31001/tekinfo.v12i2.2277.

D. Sudiantini et al., “PENGARUH PENGENDALIAN PERSEDIAAN BAHAN BAKU TERHADAP KELANCARAN PROSES PRODUKSI,” J. Ekon. Manaj. Pariwisata dan Perhotelan, vol. 1, no. 3, pp. 283–288, 2022, doi: 10.55606/jempper.v1i3.615.

N. Nador, N. Hiayati, and M. Rizal, “Pengaruh Kualitas Produk ,Harga Produk Dan Keamanan Produk Terhadap Keputusan Pembelian,” Ris. Manaj. Prodi Manaj., pp. 89–101, 2018.

M. E. Nazarudin and A. Suryadi, “Pengembangan Produk Wastafel Portable Secara Manual Dengan Metode Design for Manufacture and Assembly (Dfma),” Juminten, vol. 2, no. 2, pp. 36–47, 2021, doi: 10.33005/juminten.v2i2.228.

S. Ma’ruf, “Pengaruh Kemudahan Penggunaan, Kegunaan, Persepsi Risiko, Dan Kenyamanan Terhadap Sikap Konsumen Dalam Belanja Online (Studi Pada Toko Online Lazada.com,” J. Fak. Ekon., no. 3, pp. 535–549, 2018.

M. R. Dzakwan, M. R. Wijaya, and M. R. Qinthara, “Analisis Perbandingan Efisiensi Penggunaan Gas pada Kompor Gas Portabel dengan Kompor Gas Konvensional,” J. KMTM Akad. UNS, 2020.

D. T. Pratama and H. S. Kurniawan, “Optimasi Masalah Penugasan Menggunakan Metode Hungarian untuk Meminimalkan Waktu Produksi,” Bull. Appl. Ind. Eng. Theory, vol. 1, no. 1, pp. 16–20, 2020.

H. N. Hanifah, N. Hidayati, and R. Mutiarni, “Pengaruh Produk Ramah Lingkungan/Green Product Dan Harga Terhadap Keputusan Pembelian Produk Tupperware,” JMD J. Ris. Manaj. Bisnis Dewantara, vol. 2, no. 1, pp. 37–44, 2019, doi: 10.26533/jmd.v2i1.345.

M. Taufiqurrohman and M. Yusuf, “Pemanfaatan Energi Terbarukan dalam Pengolahan Daur Ulang Limbah,” J. MENTARI Manajemen, Pendidik. dan Teknol. Inf., vol. 1, no. 1, pp. 46–57, 2022, doi: 10.34306/mentari.v1i1.141.

A. Henri Slat, “Analisis Harga Pokok Produk Dengan Metode Full Costing Dan Penentuan Harga Jual,” 110 J. EMBA, vol. 1, no. 3, pp. 110–117, 2013.

F. Husniar, T. R. Sari, A. M. Safira, and E. R. Kamila, “Strategi Pengembangan Produk Baru Sebagai Upaya Dalam Meningkatkan Daya Saing Perusahaan,” J. Ris. Manaj. dan Akunt., vol. 3, no. 2, pp. 22–34, 2023, doi: 10.55606/jurima.v3i2.2156.




DOI: http://dx.doi.org/10.30870/vanos.v9i2.28293

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.