Design of Lifter Flyover Segment with a Structure of Lifting Beam can Escape Pairs

Dhimas Satria, Aswata Aswata, Imron Rosyadi, Rina Lusiani, Erny Listijorini, Fadhil Arief

Abstract


The flyover development today is very much at all to do because it is one solution as degrading congestion and lifter segment flyover is one important tool in the construction of flyovers. This final project offers an example of the calculation and planning lifter segment fly over the beam structure for lifting can be separated pairs which can later be changed in accordance with the specification segment flyover to be lifted. The final project is expected to be one of the references manufacture segments lifter fly over. This design uses Pahl and Beitz method and the results of this research. Specifications lifter segment fly over with beam structure for lifting to be loose tide is Lifting Equipment; Wire rope with two types of options on each drum are strands left and right torsion. Mechanism trolley; Can move on the path along the 3,019 mm, diameter the wheel trolley 381 mm, Trolley the wheel shaft diameter: 12 cm or 120 mm with material JIS S45C. Struktur lifter; Beam lifting using a beam with a weight per unit length of 1.97 N / mm with JIS G3101 SS540 material along the 4900 mm and a surface area of retaining cylindrical pedestal A of 5024 mm2 with material JIS G3101 SS540. The mechanism of motion lifter can move on the path along the 4000 mm. Wheel lifter diameter 533.4 mm. Hydraulic of lifters driver using a double acting hydraulic with a maximum

Keywords


Lifter, Fly Over, Pahl And Beitz, Beam, Lifting

Full Text:

PDF

References


R. I. Bestyanda, W. A. Prasetyo, D. Indrastono, and Muhrozi, “Perencanaan Fly Over Simpang Pelabuhan Panjang Bandar Lampung Dengan Pc-U Girder,” J. Karya Tek. Sipil, vol. 6, no. 4, pp. 109–118, 2017.

A. W. A. Sasikirana, “PERANCANGAN STRUKTUR ATAS FLY OVER SIMPANG BANDARA–TANJUNG API-API, DENGAN STRUKTUR PRECAST CONCRETE U (PCU) GIRDER,” Universitas Atma Jaya Yogyakarta, 2017.

D. Satria, Elemen Mesin 1. Serang: Untirta Press, 2014.

V. Vanessa, “FLYOVER MENGGUNAKAN SEGMENTAL BOX GIRDER DENGAN METODE SPAN - BY - SPAN : PROYEK JALAN TOL BEKASI - CAWANG - KAMPUNG MELAYU ( BECAKAYU ) SECTION 1C,” Institut Teknologi Sepuluh November, 2017.

J. Muñoz-Rojas, S. Fernández, C. Iglesias, P. Pacheco, H. Coelho, and A. Resende, “An innovative system of precast segmental span-by-span construction for span lengths of above 100m,” Multi-Span Large Bridg. - Proc. Int. Conf. Multi-Span Large Bridg. 2015, no. August, pp. 583–590, 2015.

P. Pacheco, H. Coelho, A. Resende, D. Carvalho, and I. Soares, “High productivity in bridge construction – The OPS effect,” Multi-Span Large Bridg. - Proc. Int. Conf. Multi-Span Large Bridg. 2015, no. August, pp. 559–566, 2015.

M. F. Karramal, “Perencanaan box girder prategang struktur atas fly over simpang air hitam samarinda,” Institut Teknologi Nasional Malang, 2016.

G. Pahl and W. Beitz, Engineering Design: A Systematic Approach, Second edi. London: Springer-Verlag, 2006.

D. Satria, H. Haryadi, and I. M. Arif, “Rancang Bangun Frame Sepeda Untuk Sistem Kinetic Energy Recovery System (KERS),” in Seminar Nasional IENACO, 2016, pp. 103–109.

D. Satria, S. Susilo, R. Lusiani, and Y. Hermawan, “Design of alpha type stirling machine biomass-based innovation design with the capacity of 100 watt,” IOP Conf. Ser. Mater. Sci. Eng., vol. 673, no. 1, pp. 1–6, 2019.

N. Rudenko, Mesin Pemindah Bahan. Jakarta. Jakarta: Erlangga, 1992.

S. Sularso and K. Suga, Dasar-Perencanaan Dan Pemilihan Elemen Mesin. Jakarta: PT.Pradya Pramita, 1997.

S. Khurmi, R and K. Gupta, J, Machine Design. New Delhi: Eurasia Publishing House, 2005.

J. Gere, Mechanics of Materials, Sixth Edit. Canada: Thomson, 2006.

Timoshenko, Mekanika Bahan Jilid 1, Empat. Jakarta: Erlangga, 2000.




DOI: http://dx.doi.org/10.30870/vanos.v5i2.9123

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.