Development of Basic Physics Teaching Materials Based on Science, Technology, Engineering, and Mathematics (STEM) In Industrial Engineering Study to Improve Student's Life Skill

Diana Ayu Rostikawati, Dedy Khaerudin, Asep Saefullah

Abstract


The purpose of this study was to develop Basic Physics teaching materials based on STEM, measure the feasibility of Basic Physics teaching materials based on STEM from the aspect of validity and practicality and measure the effectiveness of Basic Physics teaching materials based on STEM in improving Life Skills through student responses. This study used ADDIE model, which consists of 5 (five) steps, e.g Analysis, Design, Development, Implementation, and Evaluation. Produced a teaching material based on Science, Technology, Engineering, And Mathematics (STEM) on Dynamic Electricity concept. The developed teaching materials consist of seven materials, e.g Electric Current, Electrical Measuring Instruments, Ohm's Law, Resistance of a Conductor, Circuit Resistance, Kirchoff's Law, and Dynamic Electrical Applications. Teaching materials are also equipped with practice questions, practical instructions, project worksheets and additional reading lists. The results of the validation show that the teaching materials are feasible and meet the requirements to be used in the learning process of Basic Physics. The results of the implementation of teaching materials indicate that teaching materials have an influence and can improve student life skills. The results of responses to the quality of teaching materials showed that most students gave positive responses to teaching materials and stated that Basic Physics teaching materials based on STEM for Dynamic Electricity concept had been understood and met student learning expectations.

Keywords: Teaching Material, STEM, Life Skill


Keywords


Teaching Material, STEM, Life Skill

Full Text:

PDF

References


Ahmar, A., & Rahman, A. (2017). Development of teaching material using an Android. Global Journal of Engineering Education, 19(1).

Ardianti, S., Sulisworo, D., Pramudya, Y., & Raharjo, W. (2020). The impact of the use of STEM education approach on the blended learning to improve student’s critical thinking skills. Universal Journal of Educational Research, 8(3B), 24–32.

Astra, I. M., Raihanati, R., & Mujayanah, N. (2020). Development of electronic module using creative problem-solving model equipped with HOTS problems on the kinetic theory of gases material. Jurnal Penelitian & Pengembangan Pendidikan Fisika, 6(2), 181–194.

Chao, J., Xie, C., Nourian, S., Chen, G., Bailey, S., Goldstein, M. H., Purzer, S., Adams, R. S., & Tutwiler, M. S. (2017). Bridging the design-science gap with tools: Science learning and design behaviors in a simulated environment for engineering design. Journal of Research in Science Teaching, 54(8), 1049–1096.

Forman, R. (2014). How local teachers respond to the culture and language of a global English as a foreign language textbook. Language, Culture and Curriculum, 27(1), 72–88.

Hasanah, U. (2020). The Effectiveness of STEM Education for Overcoming Students’ Misconceptions in High School Physics: Engineering Viewpoint. Science Education International, 31(1), 5–13.

Jimborean, A., Mastrangelo, L., Loechner, V., & Clauss, P. (2012). VMAD: an advanced dynamic program analysis and instrumentation framework. International Conference on Compiler Construction, 220–239.

Kelley, T. R., & Knowles, J. G. (2016). A conceptual framework for integrated STEM education. International Journal of STEM Education, 3(1), 1–11.

Kurniawati, M. W., Anitah, S., & Suharno, S. (2017). Developing learning Science teaching materials based on scientific to improve students learning outcomes in Elementary School. European Journal of Education Studies.

Kurtdede-Fidan, N., & Aydoğdu, B. (2018). Life Skills from the Perspectives of Classroom and Science Teachers. International Journal of Progressive Education, 14(1), 32–55. https://doi.org/10.29329/ijpe.2018.129.4

Nantsou, T. P., Kapotis, E. C., & Tombras, G. S. (2021). A Physics and Engineering Lab for Primary Teachers at CERN. International Journal of Recent Contributions from Engineering, Science & IT (IJES), 9(3), 20–34.

Nguyen, T. P. L., Nguyen, T. H., & Tran, T. K. (2020). STEM education in secondary schools: Teachers’ perspective towards sustainable development. Sustainability, 12(21), 8865.

Priatna, N., LORENZ.IA, S., & Widodo, S. A. (2020). STEM education at junior high school mathematics course for improving the mathematical critical thinking skills. Journal for the Education of Gifted Young Scientists, 8(3), 1173–1184.

Quang, L. X., Hoang, L. H., Chuan, V. D., Nam, N. H., Anh, N. T. T., & Nhung, V. T. H. (2015). Integrated science, technology, engineering and mathematics (STEM) education through active experience of designing technical toys in Vietnamese schools. ArXiv Preprint ArXiv:1509.03807.

Rahmatina, C. A., Jannah, M., & Annisa, F. (2020). Pengembangan bahan ajar berbasis STEM (science, technology, engineering, and mathematics) di SMA/MA. Jurnal Pendidikan Fisika Dan Fisika Terapan, 1(1), 27–33.

Rostikawati, D. A., & Permanasari, A. (2016). Rekonstruksi bahan ajar dengan konteks socio-scientific issues pada materi zat aditif makanan untuk meningkatkan literasi sains siswa. Jurnal Inovasi Pendidikan IPA, 2(2), 156–164.

Rostikawati, D. A., & Saefullah, A. (2022). Analysis of the needs basic physics teaching materials in industrial engineering major. Gravity: Jurnal Ilmiah Penelitian Dan Pembelajaran Fisika, 8(1).

Saefullah, A., Guntara, Y., & Nulhakim, L. (2020). Reconstruction of Teaching Materials with Socio-Scientific Issues Context on Source of Energy Content. Journal of Physics: Conference Series, 1467(1). https://doi.org/10.1088/1742-6596/1467/1/012022

Saefullah, Asep, Fakhturrokhman, M., Oktarisa, Y., Arsy, R. D., Rosdiana, H., Gustiono, V., & Indriyanto, S. (2018). Rancang Bangun Alat Praktikum Hukum Ohm Untuk Memfasilitasi Kemampuan Berfikir Tingkat Tinggi (Higher Order Thinking Skills). Gravity: Scientific Journal of Research and Learning Physics, 4(2).

Saefullah, Asep, Suherman, A., Utami, R. T., Antarnusa, G., & Ayu, D. (2021). Implementation of PjBL-STEM to Improve Students’ Creative Thinking Skills On Static Fluid Topic. JIPF (Jurnal Ilmu Pendidikan Fisika), 6(2), 149–157.

Santos, A. I., & Serpa, S. (2020). Flipped Classroom for an Active Learning. Journal of Education and E-Learning Research, 7(2), 167–173.

Shernoff, D. J., Sinha, S., Bressler, D. M., & Ginsburg, L. (2017). Assessing teacher education and professional development needs for the implementation of integrated approaches to STEM education. International Journal of STEM Education, 4(1), 1–16. https://doi.org/10.1186/s40594-017-0068-1

Sorensen, G., Gupta, P. C., Nagler, E., & Viswanath, K. (2012). Promoting life skills and preventing tobacco use among low-income Mumbai youth: effects of Salaam Bombay Foundation intervention. Plos One, 7(4), e34982.

Stefanidou, C., & Skordoulis, C. (2017). Primary Student Teachers’ Understanding of Basic Ideas of Nature of Science: Laws, Theories and Models. Journal of Studies in Education, 7(1), 127–153.

Stein, M. K., & Kim, G. (2011). The role of mathematics curriculum materials in large-scale urban reform: An analysis of demands and opportunities for teacher learning. In Mathematics teachers at work (pp. 57–75). Routledge.

Sugiyono, P. D. (2017). Metode penelitian bisnis: pendekatan kuantitatif, kualitatif, kombinasi, dan R&D. Penerbit CV. Alfabeta: Bandung, 225.

Suryani, K., & Khairudin, K. (2020). Implementasi Model STEMPROCSI Studi Kasus Pada Program Studi Pendidikan Teknik Informatika dan Komputer. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 20(1), 103–113.

Syukri, M., Yanti, D. A., Mahzum, E., & Hamid, A. (2021). Development of a PjBL Model Learning Program Plan based on a STEM Approach to Improve Students’ Science Process Skills. Jurnal Penelitian Pendidikan IPA, 7(2), 269. https://doi.org/10.29303/jppipa.v7i2.680

Widyaningsih, S. W., Yusuf, I., Prasetyo, Z. K., & Istiyono, E. (2020). Online interactive multimedia oriented to HOTS through e-learning on physics material about electrical circuit. JPI (Jurnal Pendidikan Indonesia), 9(1), 1–14.

Widyastuti, E., & others. (2019). Using the ADDIE model to develop learning material for actuarial mathematics. Journal of Physics: Conference Series, 1188(1), 12052.

Yuberti, Y., Komikesari, H., & Lubis, M. (2022). Developing STEM-Based Interactive E-Books to Improve Students’ Science Literacy. Tadris: Jurnal Keguruan Dan Ilmu Tarbiyah, 7(1), 177–188.




DOI: http://dx.doi.org/10.30870/gravity.v8i2.17541

Refbacks

  • There are currently no refbacks.


Gravity has been indexed by:

     
     

 

  

 

Gravity : Jurnal Ilmiah Penelitian dan Pembelajaran Fisika is publihed by Department of Physics Education, Universitas Sultan Ageng Tirtayasa jointly with Physical Society of Indonesia (PSI)

Creative Commons License 

Gravity : Jurnal Ilmiah Penelitian dan Pembelajaran Fisika is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

Copyright © 2020, Gravity: Jurnal Ilmiah Penelitian dan Pembelajaran Fisika.