Performance of Porous Asphalt Mixture Using HDPE (High Density Polyethylene) Plastic Additives

M. Sa'dillah; Blima Oktaviastuti; Galih Damar Pandulu; Andy Kristafi Arifianto; Susana Rambu Ndima

doi:10.36055/fondasi.v13i1.22425

Performance of Porous Asphalt Mixture Using HDPE (High Density Polyethylene) Plastic Additives

M. Sa'dillah, Blima Oktaviastuti, Galih Damar Pandulu, Andy Kristafi Arifianto, Susana Rambu Ndima

Abstract

Efforts are being made to increase the strength or stability of porous asphalt mixtures by adding HDPE plastic waste. The reason for making HDPE plastic added material is that it has the same properties as asphalt, namely thermoplastic has a penetration value equivalent to pen 60/70 asphalt. This study aims to: (1) Describe the characteristics of the constituent materials of porous asphalt mixtures and (2) The effect of adding HDPE plastic to porous asphalt mixtures was reviewed based on the Marshall Test, Cantabro Loss, and Asphalt Flow Down. The research method uses experimental research in the laboratory. The research will be carried out using the Australian Asphalt Pavement Association (AAPA) 2004 approach. The research was carried out with pen 60/70 asphalt content, namely 4%, 4.5%, 5%, 5.5%, and 6% to find the value of asphalt content. optimum, then will be added with a ratio of HDPE material 0%, 2%, 4%, 6% and 8% to the total weight of KAO. The results of the Marshall characteristic analysis for porous asphalt mixtures with varying levels of 2% HDPE have met the specifications on the grounds that all parameters have met the requirements of the Australian Asphalt Pavement Association (AAPA 2004) with a VIM value at 2% content of 18.18%, for a VMA value of 29.40%, while the stability value is 640 kg and the flow value obtained is 2.30 mm while the MQ value is 284.63 kg/mm.

Keywords

HDPE; Marshall; Aspal Porous; Cantabro Loss; Asphalt Flow Down

Full Text:

PDF

References

S. Aripin, B. Saing, and E. Kustiyah, “Studi pembuatan bahan alternatif plastik biodegradable dari pati ubi jalar dengan plasticizer gliserol dengan metode melt intercalation,” J. Tek. Mesin Mercu Buana, vol. 6, no. 2, pp. 79–84, 2017, doi: http://dx.doi.org/10.22441/jtm.v6i2.1185.

A. D. Widodo, M. A. Jihan, A. Nugroho, T. Mugiono, A. H. B. Kuncoro, and S. Hardwiyono, “Pengaruh Penambahan Limbah Botol Plastik Polypthylene Terepthalate (PET) Dalam Campuran LASTON-WC Terhadap Parameter Marshall,” pp. 1–12, 2015.

J. R. Jambeck et al., “Plastic waste inputs from land into the ocean,” Science (80-. )., vol. 347, no. 6223, pp. 768–771, 2015, doi: 10.1126/science.1260352.

A. M. Díez-Pascual and A. L. Díez-Vicente, “Poly(3-hydroxybutyrate)/ZnO bionanocomposites with improved mechanical, barrier and antibacterial properties,” Int. J. Mol. Sci., vol. 15, no. 6, pp. 10950–10973, 2014, doi: 10.3390/ijms150610950.

Supriyanto, S. W. Mudjanarko, Koespiadi, and A. D. Limantara, “Studi penggunaan variasi campuran material plastik jenis high density polyethylene ( Hdpe ) ada campuran beraspal untuk lapis Aus Ac- Wc ( Asphalt Concrete Wearing Course ),” Paduraksa, vol. 8, no. 2, pp. 222–233, 2019.

A. Masyruroh and I. Rahmawati, “Pembuatan Recycle Plastik Hdpe Sederhana Menjadi Asbak,” ABDIKARYA J. Pengabdi. dan Pemberdaya. Masy., vol. 3, no. 1, pp. 53–63, 2021, doi: 10.47080/abdikarya.v3i1.1278.

B. Oktaviastuti, H. S. Wijaya, and P. Indrawan, “Pengaruh Penambahan Serbuk Ban Bekas Untuk Bahan Tambah Campuran ATB (Asphalt Treated Base),” Reka Buana J. Ilm. Tek. Sipil dan Tek. Kim., vol. 3, no. 1, pp. 16–29, 2018.

B. Oktaviastuti and Y. Yurnalisdel, “Studi Kuat Tekan Beton Geopolymer Dengan Fly Ash Sebagai Perkerasan Kaku Di Pesisir Pantai,” Fondasi J. Tek. Sipil, vol. 9, no. 2, pp. 201–214, 2020.

B. Oktaviastuti, A. Leliana, and L. Abid, “Pengaruh Bahan Tambah Serbuk Ban Bekas Pada Konstruksi Hotrolled Sheet-Wearing Course,” no. 2008, pp. 4–9, 2020.

Blima Oktaviastuti, Galih Damar Pandulu, and Evy Lusyana, “Kuat Tekan Beton Geopolymer Berbahan Dasar Abu Terbang (Fly Ash) Sebagai Alternatif Perkerasan Kaku di Daerah Pesisir,” Reka Buana J. Ilm. Tek. Sipil dan Tek. Kim., vol. 6, no. 1, pp. 78–87, 2021.

L. Arlia, S. M. Saleh, and R. Anggraini, “Karakteristik Campuran Aspal Porus Dengan Substitusi Gondorukem Pada Aspal Penetrasi 60/70,” J. Tek. Sipil, vol. 1, no. 3, pp. 657–666, 2018, doi: 10.24815/jts.v1i3.10011.

T. Rizkianto, A. Setyawan, and D. Sarwono, “Pengaruh Pengisian Rongga Pada Campuran Aspal Porus Menggunakan Aspal Polimer Starbit E-55 Terhadap Kuat Tekan Dan Kuat Tarik,” pp. 479–484, 2015.

D. Andreas Lubis, Y. Fitrianingsih, S. Pramadita, and G. Christiadora Asbanu, “Pengolahan Sampah Plastik HDPE (High Density Polyethylene) dan PET (Polyethylene Terephtalate) Sebagai Bahan Bakar Alternatif dengan Proses Pirolisis,” vol. 20, no. 4, pp. 735–742, 2022, doi: 10.14710/jil.20.4.735-742.

R. A. Laksono, “Pengaruh Penambahan Slag Sebagai Bahan Substitusi Agregat Halus Terhadap Karakteristik Marshall Dan Permeabilitas Pada Campuran Panas (Hot Mix) Aspal Porus,” J. Rekayasa Tek. Sipil Univ. Negeri Surabaya, vol. 1, no. 1, pp. 56–64, 2017.

I. R. D. Supriyadi, B. Rahardjo, and Pranoto, “Kajian eksperimental campuran aspal porus den- gan bahan tambahan plastik hdpe (high density poly ethylene),” J. Sipil Statik, vol. 23, no. 2, pp. 19–28, 2018.

N. Luh, S. Eka, A. N. Tajudin, and J. Pratama, “Menggunakan Agregat Terselimut Limbah Plastik Ldpe ( Low Density Polyethylene ),” J. Muara Sains, Teknol. Kedokt. dan ilmu Kesehat., vol. 3, no. 1, pp. 123–136, 2019.

Australian Asphalt Pavement Association (AAPA), “Open Graded Asphalt - Implementation Design Guide,” no. 1, p. 40, 2004.

S. Hadi, Metodelogi Research. 1987.

M. Sa’dillah and A. Leliana, “Karakteristik Aspal Beton Lapis Aus ( AC-WC ) Dengan Penambahan Bahan Pengisi Abu Terbang Batubara,” Pros. SENTIKUIN (Seminar Nas. Teknol. Ind. Lingkung. dan Infrastruktur), vol. 3, pp. 1–8, 2020.

M. Z. Arifin, “Pengaruh Penggunaan Abu Terbang Batubara Sebagai Bahan Pengisi Terhadap Modulus Resilien Beton Aspal Lapis Aus,” J. Himpun. Pengembang Jalan Indones., vol. 4, no. 1, pp. 59–66, 2018, doi: https://doi.org/10.26593/jh.v4i1.2849.%25p.

M. Sa’dillah, Y. E. Fajarwati, and R. A. Primasworo, “Kinerja Campuran Aspal Porus Dengan Subtitusi Limbah Beton Sebagai Bahan Ramah Lingkungan,” J. Tek. Sipil, vol. 25, no. 1, 2021, [Online]. Available: https://ojs.unud.ac.id/index.php/jits/article/view/77684

DOI: http://dx.doi.org/10.36055/fondasi.v13i1.22425