Pengukuran dan analisa efektivitas mesin pencetak paving menggunakan metode overall equipment effectiveness (OEE)

Indira Kusuma Wardani, Fransiskus Tatas Dwi Atmaji, Judi Alhilman

Abstract


Machine effectiveness is one of the important factors in the production process in a manufacturing company to produce goods. The paving molding machine is one of the machines used to produce black paving at PT XYZ. Based on historical data from the Engineering Maintenance Department, this machine has the highest breakdown frequency which has an impact on the low effectiveness and productivity of the machine. To overcome this problem, an analysis of the effectiveness of the paving molding machine was carried out using the Overall Equipment Effectiveness (OEE) method. OEE aims to analyze machine indicators, which consist of machine availability, performance efficiency, and the quality level of the machine's production. The results of the OEE analysis show that the value of the paving molding machine is 68.18% and is still below the Japan Institute of Plant Maintenance standard of 85%. Six Big Losses is used to determine the low OEE value arising from the production process, on the paving molding machine. From the results of the analysis, two dominant loss factors have the most influence on the effectiveness of the paving molding machine, namely the high value of reduced speed loss (51.92%) and idling and minor stoppages loss (23.69%). These two dominant loss factors are then analyzed using a fishbone diagram to obtain the root causes and proposed solutions.

Keywords


Overall Equipment Effectiveness, Six Big Losses, Diagram Fishbone

Full Text:

PDF

References


P. Tarigan, E. Ginting, and I. Siregar, “Perawatan Mesin Secara Preventive Maintenance Dengan Modularity Design Pada Pt. Rxz,” J. Tek. Ind. USU, vol. 3, no. 3, pp. 35–39, 2013.

F. T. D. Atmaji, “Optimasi Jadwal Perawatan Pencegahan Pada Mesin Tenun Unit Satu Di Pt Ksm, Yogyakarta,” J. Rekayasa Sist. Ind., vol. 2, no. 02, pp. 7–11, 2015, [Online]. Available: //jrsi.sie.telkomuniversity.ac.id/JRSI/article/view/83.

H. Hasrul, M. J. Shofa, and H. Winarno, “Analisa Kinerja Mesin Roughing Stand dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) dan Failure Mode Effect Analysis (FMEA),” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 3, no. 2, p. 55, 2017, doi: 10.30656/intech.v3i2.879.

D. Alvira, Y. Helianty, and H. Prassetiyo, “Usulan Peningkatan Overall Equipment Effectiveness ( Oee ) Pada Mesin Tapping Manual Dengan Meminimumkan Six Big Losses,” J. Itenas Bandung, vol. 03, no. 03, pp. 240–251, 2015.

R. R. Kurniawan, “Perencanaan Sistem Perawatan Mesin Urbannyte Dengan Menggunakan Metode Reliability Centered Maintenance II ( RCM II ) (Studi Kasus di departemen produksi PT. Masscom Graphy, Semarang),” Perenc. Sist. Perawatan Mesin Urbannyte Dengan Menggunakan Metod., no. Rcm Ii, pp. 1–8, 2014.

M. M. Zulfatri, J. Alhilman, and F. T. D. Atmaji, “Pengukuran Efektivitas Mesin Dengan Menggunakan Metode Overall Equipment Effectiveness (Oee) Dan Overall Resource Effectiveness (Ore) Pada Mesin Pl1250 Di Pt Xzy,” JISI J. Integr. Sist. Ind., vol. 7, no. 2, p. 123, 2020, doi: 10.24853/jisi.7.2.123-131.

O. C. Chikwendu, A. S. Chima, and M. C. Edith, “The optimization of overall equipment effectiveness factors in a pharmaceutical company,” Heliyon, vol. 6, no. 4, p. e03796, 2020, doi: 10.1016/j.heliyon.2020.e03796.

P. Gupta and S. Vardhan, “Optimizing OEE, productivity and production cost for improving sales volume in an automobile industry through TPM: A case study,” Int. J. Prod. Res., vol. 54, no. 10, pp. 2976–2988, 2016, doi: 10.1080/00207543.2016.1145817.

M. Tech, “Measurement of Overall Equipment Effectiveness (OEE) of a Manufacturing Industry: An Effective Lean Tool,” Int. J. Recent Trends Eng. Res., vol. 3, no. 5, pp. 268–275, 2017, doi: 10.23883/ijrter.2017.3222.wct1o.

I. G. A. Widyadana, "Pengukuran Overall Equipment Effectiveness ( OEE ) di PT Astra Otoparts Tbk. Divisi Adiwira Plastik," J. Titra, vol. 3, no. 1, pp. 41–48, 2015, [Online]. Available: http://studentjournal.petra.ac.id/index.php/teknik-industri/article/download/2981/2686.

A. P. Wibowo, F. T. D. Atmaji, and E. Budiasih, “MAINTENANCE POLICY of JET DYEING MACHINE USING LIFE CYCLE COST (LCC) AND OVERALL EQUIPMENT EFFECTIVENESS (OEE) IN PT.XYZ,” vol. 2, no. IcoIESE 2018, pp. 144–147, 2019, doi: 10.2991/icoiese-18.2019.26.

H. Murnawan and Mustofa, “PERNECANAAN PRODUKTIVITAS KERJA DARI HASIL EVALUASI PRODUKTIVITAS DENGAN METODE FISHBONE DI PERUSAHAAN PERCETAKAN KEMASAN PT . X Latar belakang Masalah,” J. Tek. Ind. HEURISTIC Vol 11 No 1 April 2014. ISSN 1693-8232, vol. 11, no. 1, pp. 27–46, 2014.

D. H. Triwardani, A. Rahman, C. Farela, and M. Tantrika, “ANALISIS OVERALL EQUIPMENT EFFECTIVENESS (OEE) DALAM MEMINIMALISI SIX BIG LOSSES PADA MESIN PRODUKSI DUAL FILTERS DD07 (Studi kasus : PT. Filtrona Indonesia, Surabaya, Jawa Timur) ANALYSIS OF OVERALL EQUIPMENT EFFECTIVENESS TO REDUCE SIX BIG LOSSES ON PRO,” vol. 07, pp. 379–391.

A. D. Maulidina, E. Rimawan, and M. Kholil, “Analisa Total Productive Maintenance terhadap Produktivitas Kapal/Armada Menggunakan Metode Overall Equipment Effectiveness pada PT. Global Trans Energy International,” J. Ind. Eng. Manag. Syst., vol. 9, no. 1, pp. 1–18, 2016, [Online]. Available: https://journal.ubm.ac.id/index.php/jiems/article/view/125.

N. A. J.Alhilman, F.Atmaji, “Software Application for Maintenance System,” 2017 Fifth Int. Conf. Inf. Commun. Technol., vol. 0, no. RCM II, pp. 470–475, 2017.

J. Alhilman and A. F. Abdillah, "Analysis of Double Indian Ballbreaker Net Sorter Machine Based on Overall Equipment Effectiveness Method Cases in Tea Plantation Plants," IOP Conf. Ser. Mater. Sci. Eng., vol. 528, no. 1, 2019, doi: 10.1088/1757-899X/528/1/012046.




DOI: http://dx.doi.org/10.36055/jiss.v7i1.12336

Refbacks

  • There are currently no refbacks.


  is supported by