Shared-storage layout for redesigning the damaged-goods warehouse

Yudi Sukmono, Taufiq Qurrahman, Farida Djumiati Sitania

Abstract


The Faculty of Engineering, Mulawarman University's equipment warehouse is divided into the office-stationery warehouse and the damaged-goods warehouse. Office-stationery warehouse stores office stationery, spare parts, and consumables. Meanwhile, the warehouse for damaged goods stores various damaged goods such as furniture, Personal Computer (PC) components, electronic goods, and laboratory equipment. The problem with the warehouse is that many items need to be better organized so they cannot be classified between furniture items, PC components, electronics, and laboratory equipment. Then another problem is the difficulty in collecting inventory data at the Faculty of Engineering, Mulawarman University. Therefore, this study proposes improvements to the warehouse’s layout that is more efficient in storing goods in the damaged-goods warehouse. The method used in this study is shared storage, where fast-moving goods are stored in a storage area near the entrance and exit. The results from the shared storage method show that the damaged warehouse layout of the Faculty of Engineering, Mulawarman University, could be more optimal, causing ineffectiveness of the movement of goods that occurred in the warehouse was unorganized. The proposed redesign of the warehouse layout shows it is better than the layout. It can be seen from the placement of goods according to their classification and the effective distance between the storage area to the door.

Keywords


Damaged goods warehouse; Facility layout; Shared-storage

Full Text:

PDF (EN)

References


P. Shima and A. Syakhroni, “Analysis of the layout of the finished goods warehouse using the shared storage method to increase storage effectiveness in PT. NCS Logistic Link,” Journal of Applied Science and Technology, vol. 1, no. 01, p. 26, Feb. 2021, doi: 10.30659/jast.1.01.26-35.

J. M. Apple, Tata Letak Pabrik dan Pemindahan Bahan. Bandung: ITB Press, 1990. ISBN: 9798001435.

Z. Zhang, H. Li, L. Yue, and Y. Du, “End of Life vehicle disassembly plant layout evaluation integrating Gray correlation and decision making trial and evaluation laboratory,” IEEE Access, vol. 8, pp. 141446–141455, 2020, doi: 10.1109/access.2020.3004447.

M. P. Stephens “Manufacturing Facilities Design & Material Handling: Sixth Edition on JSTOR,” Jstor.org, 2019. https://www.jstor.org/stable/j.ctv15wxptd (accessed Nov. 06, 2022).

J. O. Ejeh, S. Liu, and L. G. Papageorgiou, “Multi-objective optimisation for safe multi-floor process plant layout using the Dow’s Fire & Explosion Index,” Journal of Loss Prevention in the Process Industries, vol. 76, p. 104722, May 2022, doi: 10.1016/j.jlp.2021.104722.

P. Pérez-Gosende, J. Mula, and M. Díaz-Madroñero, “Facility layout planning. An extended literature review,” International Journal of Production Research, vol. 59, no. 12, pp. 3777–3816, 2021, doi: 10.1080/00207543.2021.1897176.

R. B. M. De Koster, A. L. Johnson, and D. Roy, “Warehouse design and management,” International Journal of Production Research, vol. 55, no. 21, pp. 6327–6330, 2017, doi: 10.1080/00207543.2017.1371856.

H. Pourvaziri, H. Pierreval, and H. Marian, “Integrating facility layout design and aisle structure in manufacturing systems: Formulation and exact solution,” European Journal of Operational Research, vol. 290, no. 2, pp. 499–513, Apr. 2021, doi: 10.1016/j.ejor.2020.08.012.

P. Burggräf, T. Adlon, V. Hahn, and T. Schulz-Isenbeck, “Fields of action towards automated facility layout design and optimization in factory planning – A systematic literature review,” CIRP Journal of Manufacturing Science and Technology, vol. 35, pp. 864–871, Nov. 2021, doi: 10.1016/j.cirpj.2021.09.013.

F. Ballestín, Á. Pérez, and S. Quintanilla, “A multistage heuristic for storage and retrieval problems in a warehouse with random storage,” International Transactions in Operational Research, vol. 27, no. 3, pp. 1699–1728, Sep. 2017, doi: 10.1111/itor.12454.

W. Septiani, G. A. Divia, and S. Adisuwiryo, “Warehouse layout designing of cable manufacturing company using dedicated storage and simulation Promodel,” IOP Conference Series: Materials Science and Engineering, vol. 847, no. 1, p. 012054, Apr. 2020, doi: 10.1088/1757-899x/847/1/012054.

S. E. McInerney and S. Yadavalli, “Increasing warehouse throughput through the development of a dynamic class-based storage assignment algorithm,” South African Journal of Industrial Engineering, vol. 32, no. 2, 2022, doi: 10.7166/33-2-2651.

N. Sudiarta, L. Gozali, I. Anne Marie, and I. Wayan Sukania, “Comparison study about warehouse layout from some paper case studies,” IOP Conference Series: Materials Science and Engineering, vol. 852, no. 1, p. 012112, Jul. 2020, doi: 10.1088/1757-899x/852/1/012112.

R. A. Prasetyo, D. Herwanto, and A. E. Nugraha, “Usulan penerapan metode shared storage pada tata letak stock di gudang PT XYZ,” Go-Integratif : Jurnal Teknik Sistem dan Industri, vol. 2, no. 2, pp. 124–134, Dec. 2021, doi: 10.35261/gijtsi.v2i2.5652.

N. P. A. Hidayat, “Perancangan tata letak gudang dengan metoda class-based storage studi kasus CV. SG Bandung,” Jurnal Al-Azhar Indonesia Seri Sains Dan Teknologi, vol. 1, no. 3, p. 105, Apr. 2012, doi: 10.36722/sst.v1i3.54.

J. Johan and K. Suhada, “Usulan perancangan tata letak gudang dengan menggunakan metode class-based storage (Studi kasus di PT Heksatex Indah, Cimahi Selatan),” Journal of Integrated System, vol. 1, no. 1, pp. 52–71, Jun. 2018, doi: 10.28932/jis.v1i1.989.

I. A. Marie, C. Claudia, and A. Adianto, “Optimasi persediaan bahan baku berdasarkan pengali lagrange serta rancangan tata letak gudang menggunakan metode shared storage,” Jurnal Teknik Industri, vol. 10, no. 2, pp. 105–112, Jul. 2020, doi: 10.25105/jti.v10i2.8394.

J. Febiyanti, “Finished product warehouse layout design using shared storage method,” Jurnal Mekintek : Jurnal Mekanikal, Energi, Industri, Dan Teknologi, vol. 11, no. 1, pp. 14–17, Apr. 2020, doi: 10.35335/mekintek.v11i1.8.

M. Fitri and D. Irsya Putri, “Usulan rancangan tata letak gudang penyimpanan kantong semen menggunakan metode shared storage,” Jurnal Teknologi Dan Sistem Informasi Bisnis, vol. 3, no. 1, pp. 228–233, Jan. 2021, doi: 10.47233/jteksis.v3i1.219.

N. A. Fabiani, P. Moengin, and S. Adisuwiryo, “Perancangan model simulasi tata letak gudang bahan baku dengan menggunakan metode shared storage pada PT. Braja Mukti Cakra,” Jurnal Teknik Industri, vol. 9, no. 2, pp. 98–111, Jul. 2019, doi: 10.25105/jti.v9i2.4924.

J. Arifin and T. Pamungkas, “Perbaikan tata letak gudang dengan menggunakan metode shared storage pada Perum Bulog Subdivre Karawang,” Jurnal Media Teknik dan Sistem Industri, vol. 3, no. 1, p. 7, May 2019, doi: 10.35194/jmtsi.v3i1.548.

N. D. Aryadipura, R. Rusindiyanto, and E. Purnamawaty, “Usulan perancangan ulang tata letak gudang produk jadi dan bahan baku dengan metode shared storage di PT. Temprina Media Grafika Surabaya,” JUMINTEN, vol. 2, no. 1, pp. 168–178, Jan. 2021, doi: 10.33005/juminten.v2i1.220.




DOI: http://dx.doi.org/10.36055/jiss.v8i2.16726

Refbacks

  • There are currently no refbacks.


  is supported by