Risk analysis and safety measures: JSA, HIRA, and FTA in LPG distribution

Nustin Merdiana Dewantari, Muhamad Ferdiansyah, Lely Herlina, Ade Sri Mariawati, Ani Umyati

Abstract


Industrial competition is intensifying, raising the importance of Occupational Safety and Health (OSH) practices. This study focuses on LPG distributor Fajar Sidiq Nurhidayah, a company specializing in 3 kg LPG cylinders. The lack of safety inductions and adequate Personal Protective Equipment (PPE) heightens the risk of workplace accidents, necessitating this research to mitigate such risks. Employing the Job Safety Analysis (JSA), Hazard Identification and Risk Assessment (HIRA), and Fault Tree Analysis (FTA) methods, potential hazards were identified. JSA revealed risks like collisions, being struck by the truck's back, tube pinching, and ergonomic hazards, foreseeing injuries ranging from bruises to fractures and Musculoskeletal Disorders (MSDs). HIRA uncovered six hazards: one low-risk, four medium-risk, and one high-risk. FTA pinpointed the primary danger source to be the warehouse station due to operator negligence during tube lifting, lack of PPE usage, and entangled tubes, emphasizing the worker's condition and work environment.


Keywords


Occupational Health and Safety

Full Text:

PDF

References


A. Hasibuan et al., Keselamatan dan Kesehatan Kerja. Padang: PTGlobal Eksekutif Teknologi, 2022.

K. ketenagakerjaan RI, “Profil Keselamatan dan Kesehatan Kerja Nasional Indonesia Tahun 2022,” 2022.

R. F. Daulay and M. Nuruddin, “Analisis K3 di bengkel Dwi Jaya Motor dengan Menggunakan Metode HIRA Terintegrasi M,” JUSTI (Jurnal Sist. Dan Tek. Ind., vol. 2, no. 4, pp. 571–579, 2021. doi: 10.30587/justicb.v2i4.4246.

S. S. C. Balili and F. Yuamita, “Analisis Pengendalian Risiko Kecelakaan Kerja Bagian Mekanik Pada Proyek PLTU Ampana (2x3 MW) Menggunakan Metode Job Safety Analysis (JSA),” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 2, pp. 61–69, 2022. doi:10.55826/tmit.v1iII.14.

E. H. Prasetyo, Suroto, and B. Kurniawan, “Analisis Hira (Hazard Identification and Risk Assessment) Pada Instansi X di Semarang,” J. Kesehat. Masy., vol. 6, no. 5, pp. 519–528, 2018. doi:10.14710/jkm.v6i5.22089.

E. Albrechtsen, I. Solberg, and E. Svensli, “The application and benefits of job safety analysis,” Saf. Sci., vol. 113, no. December 2018, pp. 425–437, 2019. doi:10.1016/j.ssci.2018.12.007.

N. Nurkholis and G. Adriansyah, “Pengendalian Bahaya Kerja Dengan Metode Job Safety Analysis Pada Penerimaan Afval Lokal Bagian Warehouse Di PT. ST,” Tek. Eng. Sains J., vol. 1, no. 1, p. 11, 2017. doi: 10.5281/zenodo.1115956.

A. U. Abidin and I. Ramadhan, “Penerapan Job Safety Analysis, Pengetahuan Keselamatan dan Kesehatan Kerja terhadap Kejadian Kecelakaan Kerja di Laboratorium Perguruan Tinggi,” J. Berk. Kesehat., vol. 5, no. 2, p. 76, 2019. doi: 10.20527/jbk.v5i2.7827.

I.Ismara, Keselamatan dan Kesehatan Kerja (K3). Yogyakarta: Tim K3 FT UNY, 2014.

F. Moniaga and V. S. Rompis, “Analisa Sistem Manajemen Kesehatan Dan Keselamatan Kerja (SMK3) Proyek Konstruksi Menggunakan Metode Hazard Identification and Risk Assessment,” J. Ilm. Realt., vol. 15, no. 2, pp. 65–73, 2019. doi: 10.52159/realtech.v15i2.4

G. Smarandana, A. Momon, and J. Arifin, “Penilaian Risiko K3 pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC),” J. INTECH Tek. Ind. Univ. Serang Raya, vol. 7, no. 1, pp. 56–62, 2021. doi: 10.30656/intech.v7i1.2709.

AS/NZS 4360, Risk Management AS/NZS 4360:2004. 2004, p. 30.

S. N. Trisaid, “Analisis Risiko Kecelakaan Kerja Pada Kegiatan Rig Service Menggunakan Metode HIRARC Dengan Pendekatan FTA,” J. Ilm. Tek. Ind., vol. 8, no. 1, pp. 25–33, 2020. doi:org/10.24912/jitiuntar.v8i1.6343

E. Ruijters and M. Stoelinga, “Fault tree analysis: A survey of the state-of-the-art in modeling, analysis and tools,” Comput. Sci. Rev., vol. 15, pp. 29–62, 2015. doi:10.1016/j.cosrev.2015.03.001

D. P. Sari, K. F. Marpaung, T. Calvin, Mellysa, and N. U. Handayani, “Analisis Penyebab Cacat Menggunakan Metode FMEA Dan FTA Pada Departemen Final Sanding PT Ebako Nusantara,” Pros. SNST, vol. 1, no. 1, pp. 125–130, 2018. doi: 10.36499/psnst.v1i1.2338

D. P. Restuputri, Eriko, and A. Sulaksmi, “Identifikasi Dan Pengendalian Risiko Di Bagian Produksi 1 Dalam Upaya Pencapaian Zero Accident Menggunakan Metode Hazard Identification and Risk Assessment ( HIRA),” Semin. Nas. Teknol. dan Rekayasa, pp. 24–31, 2016. doi.org/10.22219/sentra.v0i2.1827.

R. N. Purnomo, J. Mulyono, and H. Santosa, “Perancangan Alat Angkut Tabung Lpg 3 Kg yang Ergonomis (Studi Kasus Di UD. X),” J. Ilm. widya Tek., vol. 16, no. 1, p. 8, 2017. doi.org/10.33508/wt.v16i1.964.

R. Asnel and A. Pratiwi, “Analisis Faktor-Faktor Yang Mempengaruhi Keluhan Musculoskeletal Disorder Pada Pekerja Laundry,” Public Heal. Saf. Int. J., vol. 1, no. 01, pp. 45–53, 2021. doi.org/10.55642/phasij.v1i01.23.

M. F. Nugroho, E. Mas’idah, and S. B. Utomo, “Analisa Potensi Bahaya Pada Proses Produksi Paving Menggunakan Metode Job Safety Analysis,” J. Tek. Ind., vol. 1, no. 1, pp. 31–40, 2022. doi.org/10.30659/jurti.1.1.31-40.

S. Y. Arisma and I. Mashabai, “Analisa & Estimasi Penurunan Risiko Dengan Job Safety Analysis Pada Departemen Warehouse Di PT. Amman Mineral Nusa Tenggara,” J. Ind. Teknol. Samawa, vol. 1, no. 1, pp. 22–33, 2020. doi.org/10.36761/jitsa.v1i1.586

A. Wildan, T. Sukwika, K. Kholil, P. Studi, and T. Lingkungan, “Potensi Bahaya pada Proses Pembuatan Tablet Onkologi Menggunakan Metode HIRA JSA,” J. Appl. Manag. Res., vol. 2, no. 1, pp. 53–65, 2022. doi.org/10.36441/jamr.v2i1.850.

A. Y. Tripariyanto and S. Rahayuningsih, “Penerapan Metode HIRA dan Fishbone Diagram Pada Praktek Siswa SMK yang Menimbulkan Risiko Kecelakaan Kerja pada bengkel Ototronik SMK,” J. Ilm. Tek. dan Manaj. Ind. Univ. Kadiri, vol. 3, no. 2, pp. 90–103, 2020. doi.org/10.30737/jatiunik.v3i2.841.

R. Vhalery, “Pelatihan dan Pendampingan Keamanan Gas dan Air Galon AQUA di UD.Arida Tirta Jaya (FF.Tirta) Jakarta Timur,” J. Pengabdi. Masy. Edumi, vol. 1, no. 1, pp. 8–18, 2022. doi.org/10.61193/jpme.v1i1.7.

M. B. Anthony, “Identifikasi dan Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) pada Proses Instalasi Hydraulic System Menggunakan Metode HIRA (Hazard Identification and Risk Assesment) di PT. HPP,” J. Media Tek. dan Sist. Ind., vol. 4, no. 2, pp. 60–70, 2020. doi : 10.35194/jmtsi.v4i2.1030.

A. S. Mariawati, A. Umyati, and F. Andiyani, “Analisis penerapan keselamatan kerja menggunakan metode Hazard Identification Risk Assessment (HIRA) dengan pendekatan Fault Tree Anlysis (FTA),” Ind. Serv., vol. 3c, no. 1, pp. 293–300, 2017. doi.org/10.36055/jiss.v3i1c.2108.

H. Suliantoro, N. Susanto, H. Prastawa, I. Sihombing, and A. Mustikasari, “Penerapan Metode Overall Equipment Effectiveness (Oee) Dan Fault Tree Analysis (Fta) Untuk Mengukur Efektifitas Mesin Reng,” J@ti Undip J. Tek. Ind., vol. 12, no. 2, p. 105, 2017. doi.org/10.14710/jati.12.2.105-118.

M. Yusuf, T. I. Oesman, and N. A. Wicaksono, “Pemberdayaan Karyawan Dalam Penerapan Keselamatan dan Kesehatan Kerja Berbasis Fault Tree Analysis,” J. Ergon. Indones. (The Indones. J. Ergon., vol. 6, no. 1, p. 52, 2020. doi.org/10.24843/JEI.2020.v06.i01.p07.

A. A. Baig, R. Ruzli, and A. B. Buang, “Reliability Analysis Using Fault Tree Analysis: A Review,” Int. J. Chem. Eng. Appl., vol. 4, no. 3, pp. 169–173, 2013. DOI: 10.7763/IJCEA.2013.V4.287.




DOI: http://dx.doi.org/10.36055/jiss.v9i2.21847

Refbacks

  • There are currently no refbacks.


  is supported by