Workload measurement with Bourdon Wiersma and Cardiovascular Load (CVL) methods

Ade Sri Mariawati, Shanti Kirana Anggraeni, Maura Citra Nisfulail, Nustin Merdiana Dewantari, Lely Herlina, Ani Umyati

Abstract


A company operating in the sector of workshop production of nuts and bolts requires workers to maintain high levels of speed, precision, and consistency, as well as significant responsibility to deliver the best results for customers. However, while carrying out their tasks, workers may make mistakes due to work fatigue. Therefore, researchers conducted a study to determine the extent of mental and physical workload using the Bourdon Wiersma and Cardiovascular Load (CVL) methods. Bourdon Wiersma is an objective method of measuring workload to determine the level of mental burden in tasks requiring precision, speed, and high consistency, including monotonous tasks. Cardiovascular Load (CVL) involves comparing the increase in heart rate with the maximum heart rate and classifying workload based on the increase in working heart rate compared to the maximum heart rate, expressed as cardiovascular load (% CVL). The research results show that the Bourdon Wiersma percentage for the three job tasks was generally quite good before work and fell within the category of moderate or mild tiredness after work. Additionally, the largest average %CVL occurred in operators at 63%.

Keywords


Mental and physical workload; Work fatigue; Bourdon Wiersma; CVL

Full Text:

PDF

References


J. Wiyarso, Hubungan antara shift kerja dan beban kerja dengan kelelahan kerja pada perawat di ruang rawat inap Yeheskiel dan Hana di Rumah Sakit Umum GMIM Pancaran Kasih Manado, KESMAS: Jurnal Kesehatan Masyarakat Universitas Sam Ratulangi, vol. 7, no. 5, 2018, Accessed: Jun. 09, 2024. [Online]. Available: https://ejournal.unsrat.ac.id/index.php/kesmas/article/view/22138.

D. Mulfiyanti, M. Muis, and F. Rivai, “Hubungan Stres Kerja Dan Beban Kerja Dengan Kelelahan Kerja pada Perawat di RSUDTenriawaru Kelas B Kabupaten Bone Tahun 2018,” Jurnal Kesehatan Masyarakat Maritim, vol. 2, no. 1, Feb. 2020, doi: 10.30597/jkmm.v2i1.9420.

T. Tarwaka, Ergonomi Industri Dasar-Dasar Pengetahuan Ergonomi dan Aplikasi di Tempat Kerja , 2nd ed. Surakarta: Harapan Press, 2014.

E. Aprilliadi, N. H. Djanggu, and R. Rahmawati, “Pengukuran Beban Kerja Fisik dan Mental Menggunakan Metode Cardiovascular Load (CVL) dan Defence Research Agency Workload Scale (Draws) pada Operator Stasiun Kerja Rotary di PT. Sari Bumi Kusuma,” Jurnal Teknik Industri Universitas Tanjung Pura, vol. 5, no. 1, pp. 88–94, 2021.

S. Sunardi, M. T. Safirin, I. Nugraha, and N. A. V. Putra, “Analysis of Workload Measurement Using Cardiovascular Load (CVL) and Bourdon Wiersma at PT XYZ,” 2nd International Conference Eco-Innovation in Science, Engineering and Technology, pp. 257–281, 2021, doi: 10.11594/ nstp.2021.1442.

H. H. Juniar, R. D. Astuti, and I. Iftadi, “Analisis Sistem Kerja Shift Terhadap Tingkat Kelelahan Dan Pengukuran Beban Kerja Fisik Perawat RSUD Karanganyar,” Performa, vol. 16, no. 1, pp. 44–53, 2017, doi: 10.20961/performa.16.1.12750.

R. A. M. Puteri and Z. N. K. Sukarna, “Analisis Beban Kerja dengan Menggunakan Metode CVL dan NASA-TLX di PT.ABC,” Spektrum Industri, vol. 15, no. 2, pp. 121–255, 2017, doi: 10.12928/si.v15i2.7554.

F. Setyaning Handika, E. Indah Yuslistyari, and ruf Hidayatullah, “Analisis Beban Kerja Fisik dan Mental Operator Produksi di PD.,” Jurnal InTent, vol. 3, no. 2. doi: 10.47080/intent.v3i2.953.

E. Muslimah, S. Nandhiroh, and L. A. Akriyanto, “Evaluasi Beban Kerja Fisik dan Mental Pengemudi Bus AKDP Rute Solo-Semarang,” Seminar Nasional IENACO, pp. 172–178, 2015.

I. E. Alfonso, L. Widodo, and W. Sukania, “Analisa Beban Kerja Fisik dan Mental Untuk Menentukan Jumlah Pekerja Optimal di PT. X,” Jurnal Mitra Teknik Industri, vol. 1, no. 1, pp. 24–34, 2022, doi: 10.24912/jmti.v1i1.18269.

E. Aryanny and B. Baitil, “Analisis Beban Kerja Operator di Bagian Produksi dengan Metode Cardiovascular Load (CVL) dan Bourdon Wiersma untuk Mengurangi Kelelahan di CV.XYZ,” Tekmapro: Jurnal of Industrial Engineering and Manajemen, vol. 16, no. 1, pp. 59–70, 2021.

D. C. Dewi, J. Industri, S. T. Teknologi, N. Jambi, and K. Penulis, “Analisis Beban Kerja Mental Operator Mesin Menggunakan Metode NASA TLX di PTJL,” Journal of Industrial View, vol. 2, no. 2, pp. 20–28, 2020, doi: 10.26905/4881.

I. Agustiana, N. Noviyanti, and C. Rizal, “Hubungan Shift Kerja dan Usia Terhadap Kelelahan pada Karyawan Bagian Produksi di PT X. Kota Batam,” Jurnal Kesehatan Ibnu Sina, vol. 4, no. 2, pp. 1–9, 2023, doi: 10.36352/j-kis.v4i2.603.

I. Amri, S. Hahury, and M. F. Marsulan, “Analisis Tingkat Ketelitian, Kecepatan, dan Konstansi Kerja pada Karyawan Pemotong Ikan (PT.Citra Raja Ampat Canning),” Metode Jurnal Teknik Industri, vol. 8, no. 1, pp. 21–30, 2022, doi: 10.33506/mt.v8i1.1696.

R. Maharja, “Analisis Tingkat Kelelahan Kerja Berdasarkan Beban Kerja Fisik Perawat di Instalasi Rawat Inap RSU Haji Surabaya,” The Indonesian Journal of Occupational Safety and Health, vol. 4, no. 1, pp. 93–103, 2015, doi: 10.20473/ijosh.v4i1.2015.93-102.

I. E. Alfonso, L. Widodo, and W. Sukania, “Analisis Beban Kerja Fisik dan Mental untuk Menentukan Jumlah Pekerja Optimal di PT X,” Jurnal Mitra Teknik Industri, vol. 1, no. 1, pp. 24–34, 2022, doi: 10.24912/jmti.v1i1.18269.

A. Pramesti and E. Suhendar, “Analisis Beban Kerja Menggunakan Metode NASA-TLX pada CV Bahagia Jaya Alsindo,” STRING (Satuan Tulisan Riset dan Teknologi), vol. 5, no. 3, pp. 229–235, 2023, doi: 10.30998/string.v5i3.6528.

F. N. Rahman and A. Y. Pratama, “Analisis Beban Kerja Mental Pekerja Train Distribution PT. Solusi Bangun Indonesia,” Jurnal Teknologi dan Manajemen Industri Terapan / JTMIT, vol. 1, no. 1, pp. 7–14, 2022, doi: 10.55826/tmit.v1iI.11.

S. Mulyeni and A. T. Aningsih, “Pengaruh Lingkungan Kerja dan Beban Kerja terhadap Kinerja Karyawan di PT. Adira Semesta Industry,” Journal Economic Excellence Ibnu Sina, vol. 1, no. 3, 2023, doi: 10.59841/xcellence.v2i3.295.

W. Hidayat, T. Ristyowati, and G. M. Putro, “Analisis Beban Kerja Fisiologis sebagai Dasar Penentuan Waktu Istirahat untuk Mengurangi Kelelahan Kerja,” OPSI, vol. 13, no. 1, p. 62, Jun. 2020, doi: 10.31315/opsi.v13i1.3469.

D. Diniaty and Z. Muliyadi, “Analisis Beban Kerja Fisik dan Mental Karyawan Pada Lantai Produksi Dipt Pesona Laut Kuning,” Jurnal Sains, Teknologi dan Industri, vol. 13, no. 2, pp. 203–210, 2016, doi: 10.24014/sitekin.v13i2.1735.

A. Maretno and H. Haryono, “Analisa Beban Kerja Fisik dan Mental dengan Menggunakan Work Sampling dan NASA-TLX Untuk Menentukan Jumlah Operator,” Jurnal Ilmiah Dinamika Rekayasa , vol. 11, no. 2, pp. 54–62, 2015, doi: 10.20884/1.dr.2015.11.2.73.

F. M. H. Minarna and I. Paskarini, “Hubungan Antara Faktor Individu dan Beban Kerja Mental dengan Keluhan Kelelahan Kerja pada Pengemudi Haul Dumptruck,” Jurnal CHMP (Journal of Community Mental Health and Public Policy), vol. 1, no. 1, pp. 1–12, 2018, doi: 10.51602/cmhp.v1i1.16.




DOI: http://dx.doi.org/10.62870/jiss.v10i1.24477

Refbacks

  • There are currently no refbacks.


  is supported by