Effect of ultraviolet exposure and palm fibre/fibreglass direction on composite

Tri Partuti, Muhammad Iqbal Bariq, Yanyan Dwiyanti, Adhitya Trenggono, Erlina Yustanti

Abstract


Composite can be used as an alternatif material to replace items made of wood. Wood usually not resist to water and prone to weathering in outdoor application. Composite is expected to overcome the weakness of wood. This research aims to make composite with different direction of palm fibre/fibreglass as filler and unsaturated polyester resin as matrix with hand lay-up method, also to find out whether its suitable for outdoor application or not. Ultraviolet (UV) exposure is one of element at outdoor environment that can damage polymer matrix composite. UV exposure for 1, 2 and 3 months was carried out on composites with different palm fibre directions: unidirectional, bidirectional and random. To find significant relationship between fibre direction and tensile strength, and also UV exposure time and tensile strength, correlation test was carried out using SPSS. The result shows that before UV exposure, tensile strength of composite with random, unidirectional and bidirectional palm fibre were 29.97 MPa, 28.53 MPa, and 20.92 MPa, respectively. After 3 months UV exposure, mass of composite with random, unidirectional, and bidirectional palm fibre decreased by 1.14%, 1.34%, and 1.39%, respectively. The correlation test showed that there was no significant correlation between palm fibre directions and tensile strength, and also time of UV exposure and tensile strength with correlation coefficients (r) = -0.504 and -0.237, respectively. Composite colour changed become more faded after 3 months UV exposure. Intensity change of FTIR spectra showed the degradation of composite at wave number about 1750-1725 cm-1, 1230–1260 cm−1 and 700 cm−1. Based on its tensile strength, composite can replace wood with PKKI NI-5 2002 standard for quality code E14 (for unidirectional and bidirectional palm fibre) and E12 (for random palm fibre). Aesthetically, the fading of the composite colour after 3 months UV exposure indicates that composite is not suitable for outdoor application yet.

Keywords


Composite, palm fibre/fibreglass, outdoor, ultraviolet.

Full Text:

PDF

References


Jirouš-Rajković, V., & Miklečić, J. (2001). Enhancing weathering resistance of wood – a review. Polymers, 13, 1980, 1-27.

Mukhtar, I., Leman, Z., Zainudin, E. S., & Ishak, M. R. (2019). Hybrid and nonhybrid laminate composites of sugar palm and glass fibre-reinforced polypropylene: effect of alkali and sodium bicarbonate treatments. Industrial Journal of Polymer Science, 2019, 1-12.

Safri, S. N. A., Sultan, M. T. H., & Shah, A. U. M. (2020). Characterization of benzoyl treated sugar palm/glass fibre hybrid composite. Journal of Materials Research and Technology, 9, 5, 11563-11573.

Khalil, H. P. S. A., Hanida, S., Kang, C. W., & Fuaad, N. A. N. (2007). Agro-hybrid composite: the effect on mechanical and physical properties of oil palm fibre (EFB)/glass hybrid reinforced polyester composite. Journal of Reinforced Plastics and Composite, 07, 02, 203-218.

Partuti, T., Fariyan, U. H., Dwiyanti, Y., Trenggono, A., & Yustanti, E. (2022). Effect of fibre volume fraction and sodium hydroxide treatment on mechanical properties of palm fibre/unsaturated polyester composite. Journal of Physical Science and Engineering, 7, 1, 39-45.

Tan, C. S., Chan, M. Y., & Koay, S. C. (2021). Preliminary study of the mechanical properties of hybrid fibres reinforced unsaturated polyester composite. Journal of Physical Science, 32, 3, 45-49.

Retnam, B. S. J., Sivapragash, M., & Pradeep, P. (2014). Effect of fibre orientation on mechanical properties of hybrid bamboo/glass fibre polymer composite. Bulletin Material Science, 37, 5, 1059-1064.

Salim, M. S., Ariawan, D., Rasyid, M. F. A., Taib, R., M., Thirmizir, M. Z. A., & Ishak, Z. A. M. (2020). Accelerated weathering and water absorbtion behavior of kenaf fibre reinforced acrylic based polyester composites. Frountiers in Materials, 7, 26, 1-15.

Indeks Sinar Ultraviolet (UV). (2021). https://www.bmkg.go.id/kualitas-udara/indeks-uv.bmkg.

Shokrieh, M. M., & Bayat, A. (2007). Effects of ultraviolet radiation on mechanical properties of glass/polyester composite. Journal of Composite Materials, 41, 20, 2443-2455.

Ching, Y. C., Gunathilake, T. U., Ching, K. Y., Chuah, C. H., Sandu, V., Singh, R., & Liou, N.-S. (2019). Durability and life prediction in biocomposites, fibre-reinforced composites and hybrid composites (Eds). Effect of High Temperature and Ultraviolet Radiation on Polymer Composite. Elsevier, Ltd. 407-426.

Jia, Z., Li, X., & Zhao, Q. (2010). Effect of artificial weathering on surface properties of unsaturated polyester (UP) resin. Materials Chemistry and Physics, 121, 2010, 193-197.

Weathering Testing Guide Book. (2001). Atlas electric devices company. Pub. No. 2062/098/200/AA/03/01.

Muhajir, Muhamad, M. A. (2016). Analisis kekuatan tarik bahan komposit matriks resin berpenguat serat alam dengan berbagai varian tata letak. Jurnal Teknik Mesin, 1-8.

Zhao, J., Cai, G., Cui, L., Larbi, A. S., & Tsavdaridis, K. D. (2017). Deterioration of Basic Properties of the Materials in FRP-Strengthening RC Structures under Ultraviolet Exposure, Polymers, 9, 402, 1-18. doi:10.3390/polym9090402.

Gu, H. (2007). Degradation of glass fibre/polyester composites after ultraviolet radiation, Materials and Design. 29, 7, 1476-1479.

Nuryadi, Astuti, D. T., Utami, E.S., & Budiantara, M. (2017). Dasar-dasar Statistik Penelitian, Universitas Mercu Buana Yogyakarta, 133-139.

Standar Nasional Indonesia. (2002). Tata cara perencanaan konstruksi kayu Indonesia. https://setyawanteddy.files.wordpress.com/2012/02/rsni-pkki-ni-5-kayu.pdf.

Anshari, B., Rofaida, A., Sugiartha, I. W., & Pathurahman. (2015). Studi mutu kayu local Pulau Lombok berbasis Standar Nasional Indonesia (SNI 2002), Prosiding Seminar Nasional MAPEKI XVII, 62-67.

Zainuddin, S., Hosur, M. V., Kumar, A., & Jeelani, S. (2010). Durability study of neat/nanophased GFRP composites subjected to different environmental conditioning, Materials Science and Engineering: A, 527(13-14), 3091–3099. doi:10.1016/j.msea.2010.02.022.

Lu, T., Ramos, E., S., Yi, Y., & Kumosa, M. (2018). UV Degradation Model for Polymers and Polymer Matrix Composites, Polymer Degradation and Stability Journal, 1-23. doi:10.1016/j.matdes.2007.07.010.

Chin, J.W. (2007). Durability of composites exposed to ultraviolet radiation, Durability of Composites for Civil Structural Applications, 80–97. doi:10.1533/9781845693565.1.80.

Arietta, J. S., Richaud, E., Fayolle, B., & Nizeyimana, F. (2016), Thermal oxidation of vinyl ester and unsaturated polyester resins, Polymer Degradation and Stability, 1-34, doi: 10.1016/j.polymdegradstab.2016.04.003.

Koto, N., & Soegijono, B. (2019). Effect of Rice Husk Ash Filler of Resistance Against of HighSpeed Projectile Impact on Poliester-Fibreglass Double Panel Composites, IOP Conf. Series: Journal of Physics: 1191, 012058. 1-9. doi:10.1088/1742-6596/1191/1/012058.

Dholakiya, B. (2012). Unsaturated Poliester Resin for Specialty Applications. InTech Publication. http://dx.doi.org/10.5772/48479.

Przemysław, P., Andrzej, P., & Barbara, G. (2022), Investigation of Degradation of Composites Based on Unsaturated Polyester Resin and Vinyl Ester Resin, Materials (Basel), 15, 4, doi: 10.3390/ma15041286.

Coates, J. (2000) Interpretation of Infrared Spectra: A Practical Approach. In: Meyers, R.A., Ed., Encyclopedia of Analytical Chemistry, John Wiley & Sons Ltd., Chichester, 10881-10882.




DOI: http://dx.doi.org/10.36055/tjst.v18i2.16957

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Teknika: Jurnal Sains dan Teknologi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Creative Commons License

Teknika: Jurnal Sains dan Teknologi is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.