Email this article 
The fatigue life prediction of gantry crane with load capacity variation using ansys workbench
Abstract
Gantry crane merupakan salah satu jenis crane yang dapat digunakan di dalam dan di luar ruangan. Di kantor LAPAN Garut, gantry crane digunakan untuk proses perakitan roket sebelum dilaksanakan uji statik dan uji terbang. Penelitian ini mengkaji tentang prediksi umur fatik struktur crane menggunakan metode elemen hingga. Desain struktur gantry crane menggunakan Autodesk Inventor Professional 2017, sedangkan analisis elemen hingga menggunakan perangkat lunak Ansys Workbench 2019 R3. Struktur gantry crane dikenakan beban dengan variasi 7, 8, 9, dan 10 ton dengan jenis pembebanan fully-reserved. Prediksi umur fatik menggunakan teori tegangan rata-rata Gerber. Struktur gantry crane menggunakan material aluminium paduan. Hasil simulasi menunjukkan bahwa struktur gantry crane dengan 7, 8, 9, dan 10 ton memiliki umur kelelahan minimum berturut-turut 11,770 x 106, 2,307 x 106, 1,055 x 106, 0,494 x 106 siklus. Sedangkan faktor keamanan struktur gantry crane dengan 7, 8, 9, dan 10 ton memiliki faktor keamanan berturut-turut 1,296; 1,134; 1,008; dan 0.907. Pada pembebanan 10 ton, umur fatik minimum gantry crane kurang dari 1 juta siklus.
The gantry crane is one type of crane that can be used indoors and outdoors. In the LAPAN Garut office, the gantry crane is used for the rocket assembly process before static and flight tests are carried out. The study examines the fatigue life prediction of gantry crane structures using the finite element method. gantry crane structure design uses Autodesk Inventor Professional 2017, while finite element analysis uses Ansys Workbench 2019 R3 software. gantry crane structure is subjected to loads with variations of 7, 8, 9, and 10 tons with the fully-reserved type of loading. Fatigue life prediction using Gerber's mean stress theory. gantry crane structure uses aluminium alloy material. The simulation results show that the structure of the gantry crane with 7, 8, 9, and 10 tons have a minimum fatigue life of up to 11.770 x 106, 2.307 x 106, 1.055 x 106, 0.494 x 106 cycles, respectively. While the safety factor of the structure of the gantry crane with 7, 8, 9, and 10 tons have a safety factor of 1.296, 1.134, 1.008, and 0.907, respectively. At a loading of 10 tons, the minimum fatigue life of gantry crane less than 1 million cycles.
Keywords
Full Text:
PDF (ENGLISH)References
Sowa, L., Saternus, Z., & Kubiak, M. (2017). Numerical modelling of mechanical phenomena in the gantry crane beam. Procedia Eng., vol. 177, pp. 225–232.
Khan, E. R., Kardile, V. S., Dhakane, P. D., Gore, A. P., & Mahajan, B. D. (2017). Design and analysis of crane hook with different materials. Int. J. Innov. Emerg. Res. Eng., vol. 4, no. 3, pp. 227–233.
Sowa, L., & Kwiatoń, P. (2017). Numerical analysis of stress fields generated in the gantry crane beam. Procedia Eng., vol. 177, pp. 218–224.
Suratkar, A., Shukla, V., & Zakiuddin, K. S. (2013). Design optimization of overhead EOT crane box girder using finite element analysis. Int. J. Eng. Res. Technol., vol. 2, no. 7, pp. 720–724.
Pinca, C. B., Tirian, G. O., Josan, A., & Chete, G. (2010). Quantitative and qualitative study on the state of stresses and strains of the strength structure of a crane bridge. WSEAS Trans. Appl. Theor. Mech., vol. 5, no. 4, pp. 231–241.
Wibawa, L. A. N. (2019). Pemodelan umur fatik alat pengangkat roket kapasitas 20 Ton menggunakan Ansys Workbench. Turbul. J. Tek. Mesin, vol. 2, no. 2, pp. 44–49.
Wibawa, L. A. N. (2019). Desain dan simulasi elemen hingga gantry crane kapasitas 9 ton menggunakan Autodesk Inventor 2017. Manutech J. Teknol. Manufaktur, vol. 11, no. 02, pp. 41–48.
Sowa, L., Piekarska, W., Skrzypczak, T., & Kwiatoń, P. (2018). The effect of restraints type on the generated stresses in gantry crane beam. MATEC Web Conf., vol. 157, pp. 1–8.
Patel, P. R. & Patel, V. K. (2013). A review on structural analysis of overhead crane girder using FEA technique. Int. J. Eng. Sci. Innov. Technol., vol. 2, no. 4, pp. 41–44.
Wibawa, L. A. N. (2020). Prediksi umur fatik struktur crane kapasitas 10 ton menggunakan metode elemen hingga. Media Mesin Maj. Tek. Mesin, vol. 21, no. 1, pp. 18–24.
Gerdemeli, I., & Kurt, S. (2014). Design and finite element analysis of gantry crane. Key Eng. Mater., vol. 572, no. 1, pp. 517–520.
Reddy, M. A., & Krishnaveni, M. N. V. (2016). Modelling and analysis of double girder gantry crane. Int. J. Eng. Manag. Res., vol. 6, no. 4, pp. 181–184.
Ramamurthi, M. S., & Nagababu, B. N. (2019). Modeling and analysis of gantry crane with different materials. Int. J. Sci. Dev. Res., vol. 4, no. 1, pp. 229–239.
Xu, G., Tao, Y., & Liu, W. (2017). Research on U type gantry crane structure parametric finite element analysis system based on C# and APDL. Atlantis Press, Proceedings of the 2016 International Forum on Mechanical, Control and Automation (IFMCA 2016), vol. 113, no. Ifmca 2016, pp. 611–618.
Zeng, Q. D. & Guan, B. H. (2012). Modal finite element analysis of reconstructive structure for gantry crane on the basis of ANSYS and dynamic stiffness. Appl. Mech. Mater., vol. 164, pp. 456–459.
Zeng, Q. D. & Li, Q. E. (2012). Finite Element analysis of static characteristic for gantry crane. Appl. Mech. Mater., vol. 170–173, pp. 3077–3080.
Kapadni M. K. R., & Ganiger, P. S. G. (2015). A review paper on design and structural analysis of simply supported gantry crane beam for eccentric loading. Int. Res. J. Eng. Technol., vol. 02, no. 08, pp. 1622–1626.
Kolte, S. S., Bhagat, S. R., Danke, V. H., & Mundhe, V. K. (2017). Comparitive study of design process using analytical method and FEM. Int. J. Mod. Trends Eng. Res., vol. 4, no. 6, pp. 1–6.
Liu, P. F., Xing, L. J., Liu, Y. L., & Zheng, J. Y. (2014). Strength analysis and optimal design for main girder of double-trolley overhead traveling crane using finite element method. J. Fail. Anal. Prev., vol. 14, no. 1, pp. 76–86.
Chen, X., & Liu, Y. (2019). Finite Element Modeling and Simulation with Ansys Workbench, 2nd ed. Boca Raton: CRC Press Taylor & Francis Group.
Dobrovolsky, K. Z. V. (1978). Machine Elements: a textbook. Moscow: Peace Publisher.
Wibawa, L. A. N. (2020). Simulasi umur fatik rangka main landing gear menggunakan metode elemen hingga. Din. Tek. mesin, vol. 10, no. 2.
DOI: http://dx.doi.org/10.36055/tjst.v16i1.7490
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Teknika: Jurnal Sains dan Teknologi
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Teknika: Jurnal Sains dan Teknologi is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.