PENGARUH ARUS DAN JARAK KAMPUH PENGELASAN TERHADAP DISTORSI SAMBUNGAN PELAT BAJA KARBON RENDAH DENGAN MENGGUNAKAN SMAW
Abstract
Keywords
Full Text:
PDFReferences
Akella, S., Kumar, B. R., & Krishnaiah, Y. (2013). Optimisation of welding process parameters for distortion control with Taguchi approach. International Journal of Precision Technology, 3(2), 206. doi: 10.1504/ijptech.2013.053305
Callister, W. D., & Rethwisch, D. G. (2013). Materials Science and Engineering: An Introduction, 9th Edition: Ninth Edition: John Wiley and Sons, Incorporated.
Guo, N., Yin, X. Q., Liang, J., & Ma, N. (2016). Effects of heat input on welding buckling distortion by experimental measurement method. Science and Technology of Welding and Joining, 22(5), 381-388. doi: 10.1080/13621718.2016.1251079
Jeffus, L. (2016). Welding: Principles and Applications: Cengage Learning.
Karadeniz, E., Ozsarac, U., & Yildiz, C. (2007). The effect of process parameters on penetration in gas metal arc welding processes. Materials & Design, 28(2), 649-656. doi: 10.1016/j.matdes.2005.07.014
Kchaou, Y., Haddar, N., Hénaff, G., Pelosin, V., & Elleuch, K. (2014). Microstructural, compositional and mechanical investigation of Shielded Metal Arc Welding (SMAW) welded superaustenitic UNS N08028 (Alloy 28) stainless steel. Materials & Design, 63, 278-285. doi: 10.1016/j.matdes.2014.06.014
Kozak, J., & Kowalski, J. (2015). The Influence of Manufacturing Oversizing on Post-Welding Distortions of The Fillet Welded Joint. Polish Maritime Research, 22, 59-63.
Papazoglou, V. J., & Masubuchi, K. (1978). Analysis and Control of Distortion in Welded Aluminum Structures. Welding Research, September, 251-262.
Vashishtha, H., Taiwade, R. V., Sharma, S., & Patil, A. P. (2017). Effect of welding processes on microstructural and mechanical properties of dissimilar weldments between conventional austenitic and high nitrogen austenitic stainless steels. Journal of Manufacturing Processes, 25, 49-59. doi: 10.1016/j.jmapro.2016.10.008
Wiryosumarto, H., & Okumura, T. (2010). Teknologi Pengelasan Logam: Pradnya Paramita.
DOI: http://dx.doi.org/10.36055/fwl.v1i1.3288
Refbacks
- There are currently no refbacks.
FLYWHEEL: JURNAL TEKNIK MESIN UNTIRTA is licensed under a Creative Commons Attribution 4.0 International License.