PRINCIPAL MATERIAL RELATIONAL ANALYSIS DUCTING BASED ON THE PRICE AND CORROSION RATE MATERIALS

Raihan Rabby Zahran, Sunardi Sunardi, Haryadi Haryadi, Mekro Permana Pinem, Yusvardi Yusuf, Harly Demustila, Intan Nazwa

Abstract


Ducting is a supporting component of the HVAC system. (Heating, Ventilation, and Air Conditioning). In other words, ducting can be used as an air supply, and as a channel for both cold and hot air, air drainage, air absorption, and ventilation. It is used to ensure that the air quality in the room is awakened according to the needs of the room. In the selection of material for ducting, one can consider various aspects. In this journal, the aspects considered are the corrosion rate, ultimate tensile strength, and the material price of the three types of materials, namely BJLS, aluminium, and stainless steel. Based on the results of the test and calculation, BJSL has the highest corrosion rate of about 0.62 Mpy on the 14th day, stainless steel has a corrosive rate of around 0.29 Mpy on the 14th day, and aluminum has the lowest rate of corrosiveness of about 0,27 Mpy at the 15th day.


Full Text:

PDF

References


Tampubolon, M. G. (2020). Laju Korosi Pada Baja Karbon Sedang Akibat Proses Pencelupan Pada Larutan Asam Sulfat (H2SO4) dan Asam Klorida (HCl) dengan Waktu Bervariasi. SJoME Vol. 2 No. 1, 13-14.

Pattireuw, K. J. (2013). Analisis Laju Korosi pada Baja Karbon dengan Menggunakan Air Laut dan H2S04. 2.

Asep Fathudin, A. U. (2020). Analisa Desain Ducting Saluran Outpt By-Pass pada Blower Exhaust Fan EF 08/09 Fasilitas Radiometalurgi. ISSN 1979-2409, 29-30.

BSN. (2006). Baja Lapis Seng SNI 07-2053-2006. Indonesia: Badan Standardisasi Nasional.

Haryanto, M. R. (2019). Perencanaan Ducting pada Gedung Serbaguna Desa Lumpatan 1. Jurnal PETRA Vol 6, No 1, 1-7.

Cengel, Y. A. (2002). Heat Transfer A Practical Approach. New York: Mcgraw-Hill.

Sarkepo. (2021, Juni). 9 Jenis Aluminium Beserta Fungsinya. Retrieved from Sarkepo.com: https://sarkepo.com/jenis-jenis-aluminium/.

Novita, S. G. (2018). Analisis Laju Korosi dan Kekerasan pada Stainless Steel 304 dan Baja Nikel Laterit dengan Variasi Kadar Ni (0,3 dan 10%) Dalam Medium Korosif. JURNAL Teori dan Aplikasi Fisika Vol. 06 No.01, 21-31.

Santoso, A. H. (2015). Pengaruh Beban Terhadap Laju Korosi Lapisan Baja Galvanum (Zn55Al) Di Lingkungan Air Ledeng dan Air Laut. JURNAL TEKNIK ITS Vol. 4, No. 1, 1-5.

Utomo, R. S. (2017). Studi dan Karakterisasi Laju Korosi Logam Aluminium Dengan Pelapisan Membran Sol-Gel. Jurnal Teknik Mesin Vol. 06, No.3, 191.

Beer, F. E. (2013). Mechanics of Materials. New York: McGraw Hill Eduction.




DOI: http://dx.doi.org/10.62870/timer.v2i1.26160

Refbacks

  • There are currently no refbacks.