The Influence of Online Learning on Students' Learning Motivation in Study Design and Forming Technology Automotive Body

Yuga Nugraha, Yusep Sukrawan, Ibnu Mubarak

Abstract


The purpose of this study in general is to find out whether there is a causal relationship or influence on online learning on students' learning motivation in the Automotive Body Design and Formation Technology course. The method used is quantitative method, this method only to find out the results of the research is numeric then inferred using annotations. The population in this study were students of the Department of Mechanical Engineering Education, automotive concentration, class of 2018 who had taken online lectures on automotive body technology design and formation, so a sample of 30 people was obtained. The research instrument based on the variable is online learning as the independent variable and motivational variables as its dependent variable. This study uses a simple linear regression testing to see t counted to determine whether there is a causal link or influence in a linear manner. Based on the results of the study, it can be concluded that there is a significant positive effect between online learning on student learning motivation, with an influence value of 43.1% in large category.


Keywords


Online Learning, Learning Motivation, Automotive Body, Design and Formating

References


D. B. A. Pribadi, MEDIA DAN TEKNOLOGI DALAM PEMBELAJARAN, 2nd ed. PRENADAMEDIA GROUP, 2017.

M. A. B. Ladjar, “Optimalisasi pemahaman mahasiswa mata kuliah evaluasi pembelajaran penjasorkes melalui strategi pembelajaran daring,” Akad. dan Jurus Jitu Pembelajaran Daring, vol. 49, 2021.

A. L. KHARISMA, “PENGARUH MODEL PEMBELAJARAN ONLINE MELALUI WHATSAPP UNTUK MENINGKATKAN KEMAMPUAN BERPIKIR KREATIF DAN KOLABORASI PESERTA DIDIK PADA MATERI HUKUM TERMODINAMIKA DI SMA N 5 BANDAR LAMPUNG.” UIN Raden Intan Lampung, 2021.

Krismadinata et al., “Blended learning as instructional model in vocational education: Literature review,” Univers. J. Educ. Res., vol. 8, no. 11B, pp. 5801–5815, 2020, doi: 10.13189/ujer.2020.082214.

C. Coman, L. G. Țîru, L. Meseșan-Schmitz, C. Stanciu, and M. C. Bularca, “Online teaching and learning in higher education during the coronavirus pandemic: Students’ perspective,” Sustain., vol. 12, no. 24, pp. 1–22, 2020, doi: 10.3390/su122410367.

Kemdikbud RI, “Pedoman penyelenggaraan belajar dari rumah dalam masa darurat penyebaran corona virus disease (covid-19),” Surat Edaran Nomor 15 Tahun 2O2O, no. 021. pp. 1–29, 2020.

Z. Zen and F. Ariani, “Heliyon Academic achievement : the effect of project-based online learning method and student engagement,” vol. 8, no. August, 2022, doi: 10.1016/j.heliyon.2022.e11509.

R. Rahimawati, “Budikdamber (Budi Daya Ikan Dalam Ember) Solusi Pembelajaran Kewirausahaan Di Era Pandemik,” Serambi Konstr., vol. 3, no. 4, pp. 268–276, 2021.

T. M. D. G. Agung, H. Abizar, and S. Nurhaji, “Media Pembelajaran Video Tutorial Kompetensi Tune Up Mesin EFI Di SMKN 2 Pandeglang,” J. Pendidik. Tek. Mesin, vol. 21, no. 1, pp. 23–27, 2021, doi: https://doi.org/10.15294/jptm.v21i1.28614.

L. Lestari, B. Yolida, and A. Achmad, “Analisis pelaksanaan praktikum dan permasalahannya materi organisasi kehidupan di SMP se-Kecamatan Kemiling,” J. Bioterdidik Wahana Ekspresi Ilm., vol. 5, no. 5, pp. 1–13, 2017.

Sunarti Rahman, “Pentingnya Motivasi Belajar Dalam Meningkatkan Hasil Belajar,” Pros. Semin. Nas. Pendidik. Dasar, no. November, pp. 289–302, 2021.

H. Abizar, M. Fawaid, M. Nurtanto, S. Nurhaji, and S. Setiyani, “Local Wisdom-Based 4-ON (Vision, Action, Passion, and Collaboration) Model in Competencies of Machining technique in Vocational Secondary Schools,” J. Pendidik. Teknol. dan Kejuru., vol. 27, no. 1, pp. 48–56, 2021, doi: https://doi.org/10.21831/jptk.v27i1.33197.

Y. J. Saptono, “Motivasi dan keberhasilan belajar siswa. REGULA FIDEI: Jurnal Pendidikan Agama Kristen,” Vol. I | Nomor 1 | Maret, vol. 1, no. 1, pp. 181–204, 2016.

A. Parnawi, Psikologi Belajar, no. February. Yogyakarta: CV BUDI UTAMA, 2020.

M. V. Iqbal, H. Abizar, and A. Iman, “THE INFLUENCE OF 4C SKILLS ON LEARNING OUTCOMES OF VOCATIONAL STUDENTS IN THE SUBJECT OF LATHE MACHINERY ENGINEERING,” J. Pendidik. Tek. Mesin, vol. 11, no. 1, pp. 27–41, 2024, [Online]. Available: https://jptm.ejournal.unsri.ac.id/index.php/jptm/article/view/15.

D. Sumantri, S. Subijanto, S. Siswantari, S. Sudiyono, and W. Warsana, “Pengelolaan Pendidikan Kejuruan: Pengembangan Sekolah Menengah Kejuruan (SMK) 4 Tahun.” Badan Penelitian dan Pengembangan, Kemendikbud, 2017.

S. Nursery, “Motivasi Belajar Mahasiswa Dalam Mengikuti Metode Pembelajaran Daring Di STIKES Suaka Insan Pada Masa Transisi Pendemi Covid-19,” J. Penelit. UPR, vol. 3, no. 1, pp. 31–36, 2023.

R. Rimbarizki and H. Susilo, “Penerapan Pembelajaran Daring Kombinasi dalam Meningkatkan Motivasi Belajar Peserta Didik Paket C Vokasi di Pusat Kegiatan Belajar Masyarakat (PKBM) Pioneer Karanganyar,” E-Journal Unesa, vol. 6, no. 2, pp. 1–12, 2017.

M. Arifin and M. Abduh, “Peningkatan motivasi belajar model pembelajaran blended learning,” J. Basicedu, vol. 5, no. 4, pp. 2339–2347, 2021.

D. A. Rachman, D. E. Yochanan, and D. I. A. I. Samanlangi, Metode Penelitian Kuantitatif, Kualitatif, dan R&D. 2024.

N. F. Amin, S. Garancang, and K. Abunawas, “Konsep umum populasi dan sampel dalam penelitian,” Pilar, vol. 14, no. 1, pp. 15–31, 2023.

R. Fernanda and E. M. Sagoro, “Pengaruh kompensasi, kepuasan kerja, motivasi kerja dan gaya kepemimpinan terhadap kinerja karyawan,” Nominal Barom. Ris. Akunt. dan Manaj., vol. 5, no. 2, pp. 81–95, 2016.

Nuryani, “Validitas dan Reliabilitas Kuesioner Pengetahuan, Sikap dan Perilaku Gizi Seimbang Pada Remaja,” Ghidza J. Gizi dan Kesehat., vol. 3, no. 2, pp. 37–46, 2020.

M. Makbul, “Metode pengumpulan data dan instrumen penelitian,” 2021.

P. Agung and A. Yuesti, Metode Penelitian Bisnis Kuantitatif Dan Kualitatif Edisi Ke-1, vol. 1. 2019.

I. Ghozali, Aplikasi Analisis Multivariate Dengan Pogram IBM SPSS 25, 9th ed. UNDIP, 2018.

R. Meidiyustiani, “Pengaruh Modal Kerja, Ukuran Perusahaan, Pertumbuhan Penjualan dan Likuiditas terhadap Profitabilitas pada perusahaan manufaktur sektor industri barang konsumsi yang terdaftar di Bursa Efek Indonesia (BEI) periode tahun 2010–2014,” J. Akunt. dan Keuang., vol. 5, no. 2, pp. 41–59, 2016.

A. Amir, “Penggunaan media gambar dalam pembelajaran matematika,” J. eksakta, vol. 2, no. 1, pp. 34–40, 2016.

Y. Fitriyani, I. Fauzi, and M. Z. Sari, “Motivasi Belajar Mahasiswa Pada Pembelajaran Daring Selama Pandemik Covid-19,” Profesi Pendidik. Dasar, vol. 7, no. 1, pp. 121–132, 2020, doi: 10.23917/ppd.v7i1.10973.

S. Hidayat, H. Abizar, and S. D. Ramdani, “Media Pembelajaran Cutting Engine Sistem Transmisi Sepeda Motor Manual Tipe CUB,” J. Pendidik. Tek. Mesin, vol. 8, no. 2, pp. 140–150, 2021, doi: 10.36706/jptm.v8i2.15567.

S. D. Ramdani, A. Pangestu, and H. Abizar, “The dual-design-based pneumatic simulator as supporting media for electro-pneumatic practicum in vocational higher education,” J. Pendidik. Vokasi, vol. 9, no. 3, p. 307, 2020, doi: 10.21831/jpv.v9i3.27345.

K. Selvi, “Motivating factors in online courses,” Procedia - Soc. Behav. Sci., vol. 2, no. 2, pp. 819–824, 2010.

L. Musfiroh, “Pengaruh Media Pembelajaran Video Youtube Materi Masa Reformasi (1998-Sekarang) Terhadap Hasil Belajar IPS Terpadu Siswa Kelas IX MTS Negeri 3 Ponorogo.” IAIN Ponorogo, 2022.




DOI: http://dx.doi.org/10.30870/vanos.v9i2.26655

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.