NUMERICAL COOLING SIMULATION ON LAPTOP HEAT SINKS WITH VARIATIONS OF DIFFERENT AIRFLOW SPEEDS

Syamsuri Syamsuri, Novi Indah Riani

Abstract


Cooling on electronic objects, especially laptop is something to note. If the cooling system is not good, there will be overheating on the main chip motherboard and other components so that the laptop will be damaged quickly. This research aims to determine the temperature distribution on the heat sink laptop so that overheat can be overcome. This research was carried out numerically, where the specimen was a heat sink component on a laptop unit simulated using Solid works 2011 software in three dimensions with variations carried out in the form of air velocity values passing through the specimens of 5, 10, and 15 m/s. The results obtained in this study showed that the higher the speed of air flow through the heat sink, the higher the transfer of heat transfer.


Keywords


Heat sink; solid works 2011; airflow velocity variation; heat transfer

Full Text:

PDF

References


Anusaya M,Salwe, Shubham,S pande Jouned, S khan., (2014) ‘Effect of velocity and particle size on the coefficiendt of Heat transfer in fluidized Bed Heat Excharge’, International Jurnal of Enggineering Research and general Science,Volume 2, Issue2 , Feb-Maret 2014.

Chiu, Han-Cieh., Hsieh, Ren-Horn., dkk, (2017), ‘The Heat Transfer Characteristics of Liquid Cooling Heat Sink with Micro Pin Fins’, Journal of International Communication in Heat and Mass Transfer 86 (2017) 174-180.

Incopera.F.P.and Dewitt D.P, (1996), Fundamentls of Heat and Mas Transfer, John wiley and Sons.

Philip J. Prichard Fox and McDonalds, (2011), Introduction to Fluid Mechanics 8th Edition, America.

Sajedi. R., kk., (2016) ‘Spiltter Plate Application onThe Circular and Square Pin Fin Heat Sinks’, Journal of Microelectronics Reliability, MR-11972 No of Pages 11.




DOI: http://dx.doi.org/10.30870/vanos.v2i2.2921

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.