Evaluation of the Implementation of Teacing Factory in SMK Cordova Margoyoso Pati Central Java

Muhammad Zaenal Abidin, Rabiman Rabiman, Samsul Hadi, Alfat Kahaharsyah

Abstract


This study aims to determine the suitability of the implementation of the Teaching Factory at SMK Cordova Margoyoso Pati, Central Java, using the CIPP evaluation model (Context, Input, Process, Product). The background of this research is the limited synchronization between school-based industrial learning and real industrial practices, which has led to a gap between students’ competencies and industry needs. Initial observations found several problems such as inadequate facilities, limited involvement of industry partners, and a lack of systematic implementation guidelines for Teaching Factory. These issues have raised concerns regarding the effectiveness and sustainability of the program. This research uses a mixed-method approach with quantitative and qualitative methods conducted in an exploratory sequential manner. Data were collected through observation, interviews, questionnaires, and documentation during April–May 2024. Data validity was ensured through triangulation, as well as validity and reliability tests. The research subjects consisted of 30 students, 2 mentor teachers, and 1 school principal. The results show that the implementation of Teaching Factory at SMK Cordova Margoyoso in: 1) aspects of context, input, process, and product according to teachers and students are in the “very suitable” category. 2) accumulatively, these aspects fall into the “appropriate” category. However, several areas require further improvement, such as stronger collaboration with industry, regular updates to learning materials, and more structured evaluation procedures. Overall, the suitability of the Context, Input, Process, and Product aspects is in the appropriate category. Therefore, continuous improvement is necessary to optimize the quality and outcomes of the Teaching Factory implementation.

Evaluation, CIPP Method, Teaching Factory, Vocational Education, Industrial Partnership

Keywords


Evaluation, CIPP Method, Teaching Factory, Vocational Education, Industrial Partnership

Full Text:

PDF

References


S. Billett, Vocational Education: Purposes, Traditions and Prospects. Dordrecht: Springer, 2011. doi: 10.1007/978-94-007-1954-5.

M. Pavlova, Technology and Vocational Education for Sustainable Development. Queensland: Springer Science Business Media B.V., 2009.

A. B. N. R. Putra, T. T. Kiong, A. D. Rahmawati, E. Sutadji, N. Ulfatin, and M. S. Subandi, “Virtual Simulation Learning Based on AR with Sawing Machine Design to Improve and Evaluate the Special Skill for Vocational Education in the COVID-19 Pandemic Era,” in International Conference on Information Technology and Education, Universitas Negeri Malang, Faculty of Engineering, Malang, Indonesia: Institute of Electrical and Electronics Engineers Inc., 2022, pp. 298–304. doi: 10.1109/ICITE54466.2022.9759550.

F. Mutohhari, M. B. Triyono, P. Sudira, M. Nurtanto, and N. Kholifah, “The role of entrepreneurial personality mediation and technological competencies moderation in determining entrepreneurial intentions in vocational education,” J. Tech. Educ. Train., vol. 15, no. 1, pp. 128–141, 2023, doi: 10.30880/jtet.2023.15.01.012.

A. Lutfarida Agustin and A. Grummy Wailanduw, “Evaluasi Program Teaching Factory Pada Program Keahlian Teknik Dan Bisnis Sepeda Motor Di SMK Negeri 2 Surabaya,” J. Pendidik. Tek. Mesin, vol. 9, no. 1, pp. 151–157, 2019.

M. Fawaid et al., “Entrepreneurial intentions of vocational education students in indonesia: PLS-SEM approach,” J. Tech. Educ. Train., vol. 14, no. 2, pp. 91–105, 2022, doi: 10.30880/jtet.2022.14.02.009.

Zaenal Ambia and Sulaeman Deni Ramdani, “Teaching Factory On Improving Student Competency In Banten,” VANOS J. Mech. Eng. Educ., vol. 153, no. 2, pp. 153–164, Dec. 2017.

L. Clark and C. Winch, Vocational Education : International Approaches, Developments and Systems. New York: Routledge, 2007.

D. Nurmalasari and D. R. Swaramarinda, “Can TEFA (teaching factory) be realized with a creative economy, appropriate learning model and ICT in Indonesia?,” in International Business Information Management Association Conference, Universitas Negeri Jakarta, Jl. Rawamangun Muka, Jakarta, Indonesia: International Business Information Management Association, IBIMA, 2018, pp. 7148–7155.

I. FD, P. Pardjono, M. B. Triyono, and A. D. Minghat, “Indonesian Teaching Factory : The Recent Breakthrough in Education at Vocational High Schools Vocational Education in Indonesia,” Indones. J. Civ. Eng. Educ., vol. 10, no. 1, pp. 57–67, 2024.

R. Kurniawan, A. Jaedun, F. Mutohhari, and W. M. Kusuma, “The absorption of vocational education graduates in the automotive sector in the industrial world,” J. Educ. Technol., vol. 5, no. 3, pp. 482–490, 2021, doi: 10.23887/jet.v5i3.35365.

D. R. S. Cahyani and N. Miyono, “Evaluasi Program Teaching Factory dalam Membentuk Budaya Mutu di SMK,” J. Inov. Pembelajaran di Sekol., vol. 5, no. 1, pp. 062–070, 2024, doi: 10.51874/jips.v5i1.221.

S. Sutiman, H. Sofyan, S. Soenarto, F. Mutohhari, and M. Nurtanto, “Students’ career decision-making during online learning: The mediating roles of self-efficacy in vocational education,” Eur. J. Educ. Res., vol. 11, no. 3, pp. 1669–1682, 2022, doi: 10.12973/eu-jer.11.3.1669.

F. Mutohhari, S. Sutiman, M. Nurtanto, N. Kholifah, and A. Samsudin, “Difficulties in implementing of 21st century skills competence in vocational education learning, Indonesia,” Int. J. Eval. Res. Educ., vol. 10, no. 4, pp. 1229–1236, 2021.

P. B. P. Aryana, N. K. Widiartini, and N. M. S. Mertasari, “Evaluasi Pelaksanaan Teaching Factory,” J. Penelit. dan Eval. Pendidik., vol. 13, no. 2, pp. 122–138, 2023.

A. R. Rukmana, A. Rahmawati, J. S. Murni, and V. H. Adzani, “Evaluasi Program Bantuan Pelaksanaan Teaching Factory di SMK Jakarta Pusat 1,” Aksara J. Ilmu Pendidik. Nonform., vol. 7, no. 3, p. 959, 2021, doi: 10.37905/aksara.7.3.959-966.2021.

S. Sulistyanto, F. Mutohhari, A. Kurniawan, and D. Ratnawati, “Kebutuhan kompetensi dalam pasar tenaga kerja di era revolusi industri 4.0 bagi siswa SMK,” J. Taman Vokasi, vol. 9, no. 1, pp. 1–13, 2021, doi: 10.30738/jtv.v9i1.7742.

Direktorat Pembinaan Sekolah Menengah Kejuruan, Tatakelola Pelaksanaan Teaching Factory. Jakarta, 2017.

Muhammad Nurtanto, Herminarto Sofyan, Rabiman, and Moh Fawaid, “Problem Based Learning (PBL) in Industry 4.0: Improving Learning Quality through Character-Based Literacy Learning and Life Career Skill (LL-LCS),” J. Phys. Conf. Ser., vol. 1573, no. 1, pp. 0–10, 2020, doi: 10.1088/1742-6596/1573/1/012006.

Zahra Pitaloka Prasloranti, “Evaluasi Pelaksanaan Model Pembelajaran Teaching Factory Di Smkn 1 Cibadak Evaluation Learning Model of Teaching Factory Implementation at Smkn 1 Cibadak,” J. Edufortech, vol. 6, pp. 121–133, 2021.

A. Khaharsyah, “The Development of Android-Based Learning Media for Light Vehicle Engineering Skill Students of SMKNegeri 2 Pengasih,” J. Phys. Conf. Ser., vol. 1273, no. 1, 2019, doi: 10.1088/1742-6596/1273/1/012007.

N. A. Handoyono and R. Rabiman, “Development of android-based learning application in EFI materials for vocational schools,” in Journal of Physics: Conference Series, 2020, pp. 1–8. doi: 10.1088/1742-6596/1456/1/012050.

Monica Pratiwi, Ridwan, and Waskito, “Evaluasi Teaching Factory Model Cipp,” J. Imiah Pendidik. dan Pembelajaran, vol. 3, no. 3, pp. 1–8, Oct. 2019.

Imran, Marji, H. Suswanto, and B. P. Adhikari, “The influence of Teaching Factory (TEFA) implementation and work readiness on vocational high school students’ future job perspectives,” J. Pendidik. Vokasi, vol. 14, no. 1, pp. 86–96, 2024, doi: 10.21831/jpv.v14i1.66796.

Suyitno, “Investigation of Teaching Factory (TEFA) Implementation in Vocational Education,” VANOS J. Mech. Eng. Educ., vol. 34, no. 1, pp. 34–43, May 2022.

Nur Dwi Marga Putra and W. Suyanto, “Implementasi Teaching Factory Kompetensi Keahlian TBSM Di SMK Ma’Arif 1 Wates,” J. Pendidik. Vokasi Tek. Otomotif, vol. 4, no. 1, pp. 57–68, 2021.

H. Prasojo, “Evaluasi Pelaksanaan Program Teaching Factory pada Program Keahlian Teknik Pemesinan,” J. Pendidik. Vokasional Tek. Mesin, vol. 7, no. 3, pp. 203–210, 2019.

Nurcholish Arifin Handoyono, Rabiman, and Y. Kristovan, “Eksperimentasi Model Contextual Teaching and Learning untuk Mata Kuliah Pekerjaan Dasar Otomotif,” J. Din. Vokasional Tek. Mesin, vol. 5, no. 1, pp. 76–82, 2020, doi: 10.21831/dinamika.v5i1.30998.

S. Firdaus, F. D. Mulyawan, and M. Fajriana, “Pengaruh Teaching Factory Terhadap Kreatifitas, Kompetensi, serta Inovasi Siswa Sekolah Menengah Kejuruan,” J. Inov. Kurikulum, vol. 18, no. 1, pp. 95–103, 2021, doi: 10.17509/jik.v18i1.42672.

Aldian Ryandika, Rabiman, and Sigit Purnomo, “Pengembangan Modul Pembelajaran Mata Pelajaran Pengecatan Bodi Pada SMK Program Keahlian Teknik Bodi Otomotif,” J. Pendidik. Vokasi Otomotif, vol. 6, no. 2, pp. 29–38, 2024, doi: 10.21831/jpvo.v6i2.70529.




DOI: http://dx.doi.org/10.30870/vanos.v10i1.29308

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.