Design and Build of Electric Car Frame SULA Evolution
Abstract
Keywords
Full Text:
PDFReferences
M. F. Adhan Efendi, “ELECTRIC SYSTEMS IN SULA ELECTRIC CARS IN SULA ELECTRIC CARS’ SUBANG STATE POLYTECHNIC,” J. Mech. Eng. Educ., vol. 5, no. 1, pp. 47-58., 2020, doi: http://dx.doi.org/10.30870/vanos.v5i1.7352.
A. Khumaedi, N. Soedjarwanto, and A. Trisanto, “Otomatisasi Pengereman Motor DC Secara Elektris Sebagai Referensi Sistem Keamanan Mobil Listrik,” J. Rekayasa dan Teknol. Elektro, vol. 8, no. 1, pp. 31–36, 2014, doi: https://doi.org/10.23960/elc.v8n1.121.
C. O. Quandt, “Manufacturing the electric vehicle: a window of technological opportunity for southern California,” Environ. Plan. A, vol. 27, no. 6, pp. 835–862, 1995, doi: 10.1068/a270835.
A. Guizani, M. Hammadi, J. Y. Choley, T. Soriano, M. S. Abbes, and M. Haddar, “Electric vehicle design, modelling and optimization,” Mech. Ind., vol. 17, no. 4, 2016, doi: 10.1051/meca/2015095.
A. S. B. Adhan Efendi, “Pemeliharaan Mesin Mobil Listrik Sula Politeknik Negeri Subang,” J. Rekayasa Mesin, vol. 14, no. 3, p. 79, 2019, doi: 10.32497/jrm.v14i3.1591.
M. Adriana, A. A. B.P, and M. Masrianor, “Rancang Bangun Rangka (Chasis) Mobil Listrik Roda Tiga Kapasitas Satu Orang,” J. Elem., vol. 4, no. 2, p. 129, 2017, doi: 10.34128/je.v4i2.64.
A. D. Novfowan, “Mobil Listrik Tantangan Masa Depan,” Majalah Bistek Edisi 06, Jakarta, 1998.
C. O. Quandt, “Manufacturing the electric vehicle: a window of technological opportunity for southern California,” Environ. Plan. A, vol. 27, no. 6, pp. 835–862, 1995, doi: 10.1068/a270835.
L. Setiono, “PERANCANGAN MEKANIKA DAN REALISASI KONTROL MOBIL LISTRIK,” e-Proceeding Eng., vol. 3, no. 3, pp. 4669–4675, 2016.
E. Helmers and P. Marx, “Electric cars: Technical characteristics and environmental impacts,” Environ. Sci. Eur., vol. 24, no. 4, 2012, doi: 10.1186/2190-4715-24-14.
F. Un-Noor, S. Padmanaban, L. Mihet-Popa, M. N. Mollah, and E. Hossain, “A comprehensive study of key electric vehicle (EV) components, technologies, challenges, impacts, and future direction of development,” Energies, vol. 10, no. 8, 2017, doi: 10.3390/en10081217.
Z. S. Gelmanova et al., “Electric cars. Advantages and disadvantages,” J. Phys. Conf. Ser., vol. 1015, no. 5, 2018, doi: 10.1088/1742-6596/1015/5/052029.
A. F. and L. S. C. Mahmoudi, “An overview of electric Vehicle concept and power management strategies,” Int. Conf. Electr. Sci. Technol. Maghreb, vol. 1, no. 8, 2014, doi: 10.1109/CISTEM.2014.7077026.
D. Carley, The Beginners Guide to Electric Vehicles ( EV ), no. August. 2014.
C. Iclodean, B. Varga, N. Burnete, D. Cimerdean, and B. Jurchiş, “Comparison of Different Battery Types for Electric Vehicles,” IOP Conf. Ser. Mater. Sci. Eng., vol. 252, no. 1, 2017, doi: 10.1088/1757-899X/252/1/012058.
B. Kampman et al., Green Power for Electric Cars- Development of policy recommendations to harvest the potential of electric vehicles, no. January. 2010.
A. Guizani, M. Hammadi, J. Y. Choley, T. Soriano, M. S. Abbes, and M. Haddar, “Electric vehicle design, modelling and optimization,” Mech. Ind., vol. 17, no. 4, 2016, doi: 10.1051/meca/2015095.
M. Burridge and S. Alahakoon, “The Design and Construction of a Battery Electric Vehicle Propulsion System - High Performance Electric Kart Application,” IOP Conf. Ser. Earth Environ. Sci., vol. 73, no. 1, 2017, doi: 10.1088/1755-1315/73/1/012016.
J. Santiago, J. G. Oliveira, J. Lundin, J. Abrahamsson, A. Larsson, and H. Bernhoff, “Design parameters calculation of a novel driveline for electric vehicles,” World Electr. Veh. J. Vol., vol. 3, p. 0225, 2009.
M. S. B. A. Razak, M. H. Bin Hasim, and N. A. Bin Ngatiman, “Design of Electric Vehicle Racing Car Chassis using Topology Optimization Method,” MATEC Web Conf., vol. 97, no. January, 2017, doi: 10.1051/matecconf/20179701117.
DOI: http://dx.doi.org/10.30870/vanos.v6i1.9436
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 4.0 International License.