Measurement of Physical Workload Using the NIOSH (National Institute of Occupational Safety and Health) Method for Rice Transport Activities at Kranggot Market - Cilegon
Abstract
Kranggot Market is one of the markets in the city of Cilegon. This traditional market sells various essential goods and basic necessities, one of which is rice. The rice sold at Kranggot Market is supplied from various regions, transported by supplier trucks to rice shops in the market. The rice offloaded from the trucks is typically carried directly by the workers of these shops. The loads carried by the workers vary, ranging from 5 kg to 50 kg, which can pose physical hazards to their bodies, such as bending issues, fractures, spine injuries, and other risks.
To address these issues, a physical workload measurement is conducted on rice-carrying workers using the NIOSH method. The study aims to calculate the Recommended Weight Limit (RWL) and Lifting Index (LI), provide recommendations, and assess whether the lifting activities performed by the workers pose risks or are within safe limits. According to the calculation results, the RWL and LI values before the improvements were 10.21 and 4.90, respectively, at the origin position, and 12.67 and 3.95 at the destination position. After the suggested improvements were implemented, the RWL and LI values reached 46.32 and 1.08, respectively. It can be concluded that the recommended improvements using material handling can reduce the risk of injury to workers.
Full Text:
PDFReferences
D. P. Mayangsari, S. Sunardi, and T. Tranggono, “Analisis Risiko Ergonomi pada Pekerjaan Mengangkat di Bagian Gudang Bahan Baku PT. XYZ dengan Metode NIOSH Lifting Equation,” Juminten : Jurnal Manajemen Industri dan Teknologi, vol. 1, no. 3, pp. 91–103, 2020, doi: https://doi.org/10.33005/juminten.v1i3.109.
D. Lesmana, “Analisis Beban Kerja menggunakan Metode Recommended Weight Limit dan Lifting Index,” J Teknol, vol. 12, no. 1, pp. 21–26, Jun. 2022, doi: 10.35134/jitekin.v12i1.66.
I. Y. Anggraini and A. A. Karim, “Analisis Pengangkatan Beban pada Proses Pencetakan Tahu Menggunakan Metode Recommended Weight Limit (RWL) di UMKM Kota Balikpapan,” Journal of Industrial Innovation and Safety Engineering (JINSENG), vol. 1, no. 1, pp. 10–16, Feb. 2023, doi: 10.35718/jinseng.v1i1.747.
Y. Mauluddin and M. T. Ramadhan, “Analisis Beban Angkat dan Postur Kerja dalam Pengangkutan Gallon Air 19 Kg di PT Medina,” Jurnal Kalibrasi, vol. 18, no. 01, pp. 30–35, 2020, doi:
https://doi.org/10.33364/kalibrasi/v.18-1.728.
R. Purwaningsih, D. Ayu, and N. Susanto, “Desain Stasiun Kerja dan Postur Kerja dengan Menggunakan Analisis Biomekanik Untuk Mengurangi Beban Statis dan Keluhan pada Otot,” Jurnal Teknik industri, vol. 12, no. 1, pp. 15–22, 2017.
A. I. Said, A. Hudi Perdana, A. Muthi’a Syafira, and D. P. Rahajeng, “Redesain Troli Pada UMKM Ayam Goreng Keraton Dengan Menggunakan Metode Antropometri Dan Handtools Design,” 2023.
DOI: http://dx.doi.org/10.36055/joseam.v3i2.29465
Refbacks
- There are currently no refbacks.
is supported by
This work is licensed under Creative Commons Attribution-ShareAlike 4.0 International